Base by kubalewski · Pull Request #1 · kubalewski/linux-dpll

kubalewski · 2022-10-17T16:19:29Z

base for futher development

Design has been changed by separating pins (sources/outputs) from dpll. This patch introduces adjustments in ice driver. Co-developed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Milena Olech <milena.olech@intel.com>

Change design by separating pins (sources/outputs) from dpll. Multiple dpll can share a pins, and pins can be either sources or outputs. The kernel module can also register a pin with different pin instead of dpll, this allows to have muxed pins attached from multiple driver instances within one already registered pin. Co-developed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Milena Olech <milena.olech@intel.com>

Previous implementation created ops for dedicated to pin object that allows to set/get pin priority. However priority of the pin may differ between various dplls. That is why this feature has been moved to dpll ops. Co-developed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Milena Olech <milena.olech@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Milena Olech <milena.olech@intel.com>

Previously: - Only one pin structure was initialized. Init function iterated over same address, - Name was not used for pin initialization. Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>

The dpll_init_pin function was added for the same reason as dpll_pin_alloc, allow external module to allocate and init a dpll_pin. Merge two functions. dpll_pin_alloc function was used and fixed, its name and behavior is consistent with the function which allocates dpll, dpll_init_pin was removed as it was redundant. Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>

Add a new feature flag for SyncE. Fixes: - zero init a pin stracture on allocation - check if memory was allocated - in case of memory allocation failure stop and release resources - remove mutex lock from worker function Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>

On WCN3990, we are seeing a rare scenario where copy engine hardware is sending a copy complete interrupt to the host driver while still processing the buffer that the driver has sent, this is leading into an SMMU fault triggering kernel panic. This is happening on copy engine channel 3 (CE3) where the driver normally enqueues WMI commands to the firmware. Upon receiving a copy complete interrupt, host driver will immediately unmap and frees the buffer presuming that hardware has processed the buffer. In the issue case, upon receiving copy complete interrupt, host driver will unmap and free the buffer but since hardware is still accessing the buffer (which in this case got unmapped in parallel), SMMU hardware will trigger an SMMU fault resulting in a kernel panic. In order to avoid this, as a work around, add a delay before unmapping the copy engine source DMA buffer. This is conditionally done for WCN3990 and only for the CE3 channel where issue is seen. Below is the crash signature: wifi smmu error: kernel: [ 10.120965] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x7fdfd8ac0, fsynr=0x500003,cbfrsynra=0xc1, cb=6 arm-smmu 15000000.iommu: Unhandled context fault:fsr=0x402, iova=0x7fe06fdc0, fsynr=0x710003, cbfrsynra=0xc1, cb=6 qcom-q6v5-mss 4080000.remoteproc: fatal error received: err_qdi.c:1040:EF:wlan_process:0x1:WLAN RT:0x2091: cmnos_thread.c:3998:Asserted in copy_engine.c:AXI_ERROR_DETECTED:2149 remoteproc remoteproc0: crash detected in 4080000.remoteproc: type fatal error <3> remoteproc remoteproc0: handling crash #1 in 4080000.remoteproc pc : __arm_lpae_unmap+0x500/0x514 lr : __arm_lpae_unmap+0x4bc/0x514 sp : ffffffc011ffb530 x29: ffffffc011ffb590 x28: 0000000000000000 x27: 0000000000000000 x26: 0000000000000004 x25: 0000000000000003 x24: ffffffc011ffb890 x23: ffffffa762ef9be0 x22: ffffffa77244ef00 x21: 0000000000000009 x20: 00000007fff7c000 x19: 0000000000000003 x18: 0000000000000000 x17: 0000000000000004 x16: ffffffd7a357d9f0 x15: 0000000000000000 x14: 00fd5d4fa7ffffff x13: 000000000000000e x12: 0000000000000000 x11: 00000000ffffffff x10: 00000000fffffe00 x9 : 000000000000017c x8 : 000000000000000c x7 : 0000000000000000 x6 : ffffffa762ef9000 x5 : 0000000000000003 x4 : 0000000000000004 x3 : 0000000000001000 x2 : 00000007fff7c000 x1 : ffffffc011ffb890 x0 : 0000000000000000 Call trace: __arm_lpae_unmap+0x500/0x514 __arm_lpae_unmap+0x4bc/0x514 __arm_lpae_unmap+0x4bc/0x514 arm_lpae_unmap_pages+0x78/0xa4 arm_smmu_unmap_pages+0x78/0x104 __iommu_unmap+0xc8/0x1e4 iommu_unmap_fast+0x38/0x48 __iommu_dma_unmap+0x84/0x104 iommu_dma_free+0x34/0x50 dma_free_attrs+0xa4/0xd0 ath10k_htt_rx_free+0xc4/0xf4 [ath10k_core] ath10k_core_stop+0x64/0x7c [ath10k_core] ath10k_halt+0x11c/0x180 [ath10k_core] ath10k_stop+0x54/0x94 [ath10k_core] drv_stop+0x48/0x1c8 [mac80211] ieee80211_do_open+0x638/0x77c [mac80211] ieee80211_open+0x48/0x5c [mac80211] __dev_open+0xb4/0x174 __dev_change_flags+0xc4/0x1dc dev_change_flags+0x3c/0x7c devinet_ioctl+0x2b4/0x580 inet_ioctl+0xb0/0x1b4 sock_do_ioctl+0x4c/0x16c compat_ifreq_ioctl+0x1cc/0x35c compat_sock_ioctl+0x110/0x2ac __arm64_compat_sys_ioctl+0xf4/0x3e0 el0_svc_common+0xb4/0x17c el0_svc_compat_handler+0x2c/0x58 el0_svc_compat+0x8/0x2c Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1 Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Youghandhar Chintala <quic_youghand@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221012142733.32420-1-quic_youghand@quicinc.com

…ker() This patch fixes an intra-object buffer overflow in brcmfmac that occurs when the device provides a 'bsscfgidx' equal to or greater than the buffer size. The patch adds a check that leads to a safe failure if that is the case. This fixes CVE-2022-3628. UBSAN: array-index-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c index 52 is out of range for type 'brcmf_if *[16]' CPU: 0 PID: 1898 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: events brcmf_fweh_event_worker Call Trace: dump_stack_lvl+0x57/0x7d ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds+0x69/0x80 ? memcpy+0x39/0x60 brcmf_fweh_event_worker+0xae1/0xc00 ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? process_one_work+0x13e0/0x13e0 kthread+0x379/0x450 ? _raw_spin_unlock_irq+0x24/0x30 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x1f/0x30 ================================================================================ general protection fault, probably for non-canonical address 0xe5601c0020023fff: 0000 [#1] SMP KASAN KASAN: maybe wild-memory-access in range [0x2b0100010011fff8-0x2b0100010011ffff] CPU: 0 PID: 1898 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: events brcmf_fweh_event_worker RIP: 0010:brcmf_fweh_call_event_handler.isra.0+0x42/0x100 Code: 89 f5 53 48 89 fb 48 83 ec 08 e8 79 0b 38 fe 48 85 ed 74 7e e8 6f 0b 38 fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 8b 00 00 00 4c 8b 7d 00 44 89 e0 48 ba 00 00 00 RSP: 0018:ffffc9000259fbd8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: ffff888115d8cd50 RCX: 0000000000000000 RDX: 0560200020023fff RSI: ffffffff8304bc91 RDI: ffff888115d8cd50 RBP: 2b0100010011ffff R08: ffff888112340050 R09: ffffed1023549809 R10: ffff88811aa4c047 R11: ffffed1023549808 R12: 0000000000000045 R13: ffffc9000259fca0 R14: ffff888112340050 R15: ffff888112340000 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000004053ccc0 CR3: 0000000112740000 CR4: 0000000000750ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: brcmf_fweh_event_worker+0x117/0xc00 ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? process_one_work+0x13e0/0x13e0 kthread+0x379/0x450 ? _raw_spin_unlock_irq+0x24/0x30 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x1f/0x30 Modules linked in: 88XXau(O) 88x2bu(O) ---[ end trace 41d302138f3ff55a ]--- RIP: 0010:brcmf_fweh_call_event_handler.isra.0+0x42/0x100 Code: 89 f5 53 48 89 fb 48 83 ec 08 e8 79 0b 38 fe 48 85 ed 74 7e e8 6f 0b 38 fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 8b 00 00 00 4c 8b 7d 00 44 89 e0 48 ba 00 00 00 RSP: 0018:ffffc9000259fbd8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: ffff888115d8cd50 RCX: 0000000000000000 RDX: 0560200020023fff RSI: ffffffff8304bc91 RDI: ffff888115d8cd50 RBP: 2b0100010011ffff R08: ffff888112340050 R09: ffffed1023549809 R10: ffff88811aa4c047 R11: ffffed1023549808 R12: 0000000000000045 R13: ffffc9000259fca0 R14: ffff888112340050 R15: ffff888112340000 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000004053ccc0 CR3: 0000000112740000 CR4: 0000000000750ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr> Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Reviewed-by: Arend van Spriel <aspriel@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Dokyung Song <dokyung.song@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221021061359.GA550858@laguna

In piix4_probe(), the piix4 adapter will be registered in: piix4_probe() piix4_add_adapters_sb800() / piix4_add_adapter() i2c_add_adapter() Based on the probed device type, piix4_add_adapters_sb800() or single piix4_add_adapter() will be called. For the former case, piix4_adapter_count is set as the number of adapters, while for antoher case it is not set and kept default *zero*. When piix4 is removed, piix4_remove() removes the adapters added in piix4_probe(), basing on the piix4_adapter_count value. Because the count is zero for the single adapter case, the adapter won't be removed and makes the sources allocated for adapter leaked, such as the i2c client and device. These sources can still be accessed by i2c or bus and cause problems. An easily reproduced case is that if a new adapter is registered, i2c will get the leaked adapter and try to call smbus_algorithm, which was already freed: Triggered by: rmmod i2c_piix4 && modprobe max31730 BUG: unable to handle page fault for address: ffffffffc053d860 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 3752 Comm: modprobe Tainted: G Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:i2c_default_probe (drivers/i2c/i2c-core-base.c:2259) i2c_core RSP: 0018:ffff888107477710 EFLAGS: 00000246 ... <TASK> i2c_detect (drivers/i2c/i2c-core-base.c:2302) i2c_core __process_new_driver (drivers/i2c/i2c-core-base.c:1336) i2c_core bus_for_each_dev (drivers/base/bus.c:301) i2c_for_each_dev (drivers/i2c/i2c-core-base.c:1823) i2c_core i2c_register_driver (drivers/i2c/i2c-core-base.c:1861) i2c_core do_one_initcall (init/main.c:1296) do_init_module (kernel/module/main.c:2455) ... </TASK> ---[ end trace 0000000000000000 ]--- Fix this problem by correctly set piix4_adapter_count as 1 for the single adapter so it can be normally removed. Fixes: 528d53a ("i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>

…_xmit() When device is running and the interface status is changed, the gpf issue is triggered. The problem triggering process is as follows: Thread A: Thread B ieee80211_runtime_change_iftype() process_one_work() ... ... ieee80211_do_stop() ... ... ... sdata->bss = NULL ... ... ieee80211_subif_start_xmit() ieee80211_multicast_to_unicast //!sdata->bss->multicast_to_unicast cause gpf issue When the interface status is changed, the sending queue continues to send packets. After the bss is set to NULL, the bss is accessed. As a result, this causes a general-protection-fault issue. The following is the stack information: general protection fault, probably for non-canonical address 0xdffffc000000002f: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000178-0x000000000000017f] Workqueue: mld mld_ifc_work RIP: 0010:ieee80211_subif_start_xmit+0x25b/0x1310 Call Trace: <TASK> dev_hard_start_xmit+0x1be/0x990 __dev_queue_xmit+0x2c9a/0x3b60 ip6_finish_output2+0xf92/0x1520 ip6_finish_output+0x6af/0x11e0 ip6_output+0x1ed/0x540 mld_sendpack+0xa09/0xe70 mld_ifc_work+0x71c/0xdb0 process_one_work+0x9bf/0x1710 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 </TASK> Fixes: f856373 ("wifi: mac80211: do not wake queues on a vif that is being stopped") Reported-by: syzbot+c6e8fca81c294fd5620a@syzkaller.appspotmail.com Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221026063959.177813-1-shaozhengchao@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>

kvm_zap_gfn_range() must be called in an SRCU read-critical section, but there is no SRCU annotation in __kvm_set_or_clear_apicv_inhibit(). This can lead to the following warning via kvm_arch_vcpu_ioctl_set_guest_debug() if a Shadow MMU is in use (TDP MMU disabled or nesting): [ 1416.659809] ============================= [ 1416.659810] WARNING: suspicious RCU usage [ 1416.659839] 6.1.0-dbg-DEV #1 Tainted: G S I [ 1416.659853] ----------------------------- [ 1416.659854] include/linux/kvm_host.h:954 suspicious rcu_dereference_check() usage! [ 1416.659856] ... [ 1416.659904] dump_stack_lvl+0x84/0xaa [ 1416.659910] dump_stack+0x10/0x15 [ 1416.659913] lockdep_rcu_suspicious+0x11e/0x130 [ 1416.659919] kvm_zap_gfn_range+0x226/0x5e0 [ 1416.659926] ? kvm_make_all_cpus_request_except+0x18b/0x1e0 [ 1416.659935] __kvm_set_or_clear_apicv_inhibit+0xcc/0x100 [ 1416.659940] kvm_arch_vcpu_ioctl_set_guest_debug+0x350/0x390 [ 1416.659946] kvm_vcpu_ioctl+0x2fc/0x620 [ 1416.659955] __se_sys_ioctl+0x77/0xc0 [ 1416.659962] __x64_sys_ioctl+0x1d/0x20 [ 1416.659965] do_syscall_64+0x3d/0x80 [ 1416.659969] entry_SYSCALL_64_after_hwframe+0x63/0xcd Always take the KVM SRCU read lock in __kvm_set_or_clear_apicv_inhibit() to protect the GFN to memslot translation. The SRCU read lock is not technically required when no Shadow MMUs are in use, since the TDP MMU walks the paging structures from the roots and does not need to look up GFN translations in the memslots, but make the SRCU locking unconditional for simplicty. In most cases, the SRCU locking is taken care of in the vCPU run loop, but when called through other ioctls (such as KVM_SET_GUEST_DEBUG) there is no srcu_read_lock. Tested: ran tools/testing/selftests/kvm/x86_64/debug_regs on a DBG build. This patch causes the suspicious RCU warning to disappear. Note that the warning is hit in __kvm_zap_rmaps(), so kvm_memslots_have_rmaps() must return true in order for this to repro (i.e. the TDP MMU must be off or nesting in use.) Reported-by: Greg Thelen <gthelen@google.com> Fixes: 36222b1 ("KVM: x86: don't disable APICv memslot when inhibited") Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20221102205359.1260980-1-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Move am65_cpsw_nuss_phylink_cleanup() call to after am65_cpsw_nuss_cleanup_ndev() so phylink is still valid to prevent the below Segmentation fault on module remove when first slave link is up. [ 31.652944] Unable to handle kernel paging request at virtual address 00040008000005f4 [ 31.684627] Mem abort info: [ 31.687446] ESR = 0x0000000096000004 [ 31.704614] EC = 0x25: DABT (current EL), IL = 32 bits [ 31.720663] SET = 0, FnV = 0 [ 31.723729] EA = 0, S1PTW = 0 [ 31.740617] FSC = 0x04: level 0 translation fault [ 31.756624] Data abort info: [ 31.759508] ISV = 0, ISS = 0x00000004 [ 31.776705] CM = 0, WnR = 0 [ 31.779695] [00040008000005f4] address between user and kernel address ranges [ 31.808644] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 31.814928] Modules linked in: wlcore_sdio wl18xx wlcore mac80211 libarc4 cfg80211 rfkill crct10dif_ce phy_gmii_sel ti_am65_cpsw_nuss(-) sch_fq_codel ipv6 [ 31.828776] CPU: 0 PID: 1026 Comm: modprobe Not tainted 6.1.0-rc2-00012-gfabfcf7dafdb-dirty #160 [ 31.837547] Hardware name: Texas Instruments AM625 (DT) [ 31.842760] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 31.849709] pc : phy_stop+0x18/0xf8 [ 31.853202] lr : phylink_stop+0x38/0xf8 [ 31.857031] sp : ffff80000a0839f0 [ 31.860335] x29: ffff80000a0839f0 x28: ffff000000de1c80 x27: 0000000000000000 [ 31.867462] x26: 0000000000000000 x25: 0000000000000000 x24: ffff80000a083b98 [ 31.874589] x23: 0000000000000800 x22: 0000000000000001 x21: ffff000001bfba90 [ 31.881715] x20: ffff0000015ee000 x19: 0004000800000200 x18: 0000000000000000 [ 31.888842] x17: ffff800076c45000 x16: ffff800008004000 x15: 000058e39660b106 [ 31.895969] x14: 0000000000000144 x13: 0000000000000144 x12: 0000000000000000 [ 31.903095] x11: 000000000000275f x10: 00000000000009e0 x9 : ffff80000a0837d0 [ 31.910222] x8 : ffff000000de26c0 x7 : ffff00007fbd6540 x6 : ffff00007fbd64c0 [ 31.917349] x5 : ffff00007fbd0b10 x4 : ffff00007fbd0b10 x3 : ffff00007fbd3920 [ 31.924476] x2 : d0a07fcff8b8d500 x1 : 0000000000000000 x0 : 0004000800000200 [ 31.931603] Call trace: [ 31.934042] phy_stop+0x18/0xf8 [ 31.937177] phylink_stop+0x38/0xf8 [ 31.940657] am65_cpsw_nuss_ndo_slave_stop+0x28/0x1e0 [ti_am65_cpsw_nuss] [ 31.947452] __dev_close_many+0xa4/0x140 [ 31.951371] dev_close_many+0x84/0x128 [ 31.955115] unregister_netdevice_many+0x130/0x6d0 [ 31.959897] unregister_netdevice_queue+0x94/0xd8 [ 31.964591] unregister_netdev+0x24/0x38 [ 31.968504] am65_cpsw_nuss_cleanup_ndev.isra.0+0x48/0x70 [ti_am65_cpsw_nuss] [ 31.975637] am65_cpsw_nuss_remove+0x58/0xf8 [ti_am65_cpsw_nuss] Cc: <Stable@vger.kernel.org> # v5.18+ Fixes: e8609e6 ("net: ethernet: ti: am65-cpsw: Convert to PHYLINK") Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

Andrii Nakryiko says: ==================== This patch set fixes and improves BPF verifier's precision tracking logic for SCALAR registers. Patches #1 and #2 are bug fixes discovered while working on these changes. Patch #3 enables precision tracking for BPF programs that contain subprograms. This was disabled before and prevent any modern BPF programs that use subprograms from enjoying the benefits of SCALAR (im)precise logic. Patch #4 is few lines of code changes and many lines of explaining why those changes are correct. We establish why ignoring precise markings in current state is OK. Patch #5 build on explanation in patch #4 and pushes it to the limit by forcefully forgetting inherited precise markins. Patch #4 by itself doesn't prevent current state from having precise=true SCALARs, so patch #5 is necessary to prevent such stray precise=true registers from creeping in. Patch #6 adjusts test_align selftests to work around BPF verifier log's limitations when it comes to interactions between state output and precision backtracking output. Overall, the goal of this patch set is to make BPF verifier's state tracking a bit more efficient by trying to preserve as much generality in checkpointed states as possible. v1->v2: - adjusted patch #1 commit message to make it clear we are fixing forward step, not precision backtracking (Alexei); - moved last_idx/first_idx verbose logging up to make it clear when global func reaches the first empty state (Alexei). ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Changes de-duplication logic for enums in the following way: - update btf_hash_enum to ignore size and kind fields to get ENUM and ENUM64 types in a same hash bucket; - update btf_compat_enum to consider enum fwd to be compatible with full enum64 (and vice versa); This allows BTF de-duplication in the following case: // CU #1 enum foo; struct s { enum foo *a; } *x; // CU #2 enum foo { x = 0xfffffffff // big enough to force enum64 }; struct s { enum foo *a; } *y; De-duplicated BTF prior to this commit: [1] ENUM64 'foo' encoding=UNSIGNED size=8 vlen=1 'x' val=68719476735ULL [2] INT 'long unsigned int' size=8 bits_offset=0 nr_bits=64 encoding=(none) [3] STRUCT 's' size=8 vlen=1 'a' type_id=4 bits_offset=0 [4] PTR '(anon)' type_id=1 [5] PTR '(anon)' type_id=3 [6] STRUCT 's' size=8 vlen=1 'a' type_id=8 bits_offset=0 [7] ENUM 'foo' encoding=UNSIGNED size=4 vlen=0 [8] PTR '(anon)' type_id=7 [9] PTR '(anon)' type_id=6 De-duplicated BTF after this commit: [1] ENUM64 'foo' encoding=UNSIGNED size=8 vlen=1 'x' val=68719476735ULL [2] INT 'long unsigned int' size=8 bits_offset=0 nr_bits=64 encoding=(none) [3] STRUCT 's' size=8 vlen=1 'a' type_id=4 bits_offset=0 [4] PTR '(anon)' type_id=1 [5] PTR '(anon)' type_id=3 Enum forward declarations in C do not provide information about enumeration values range. Thus the `btf_type->size` field is meaningless for forward enum declarations. In fact, GCC does not encode size in DWARF for forward enum declarations (but dwarves sets enumeration size to a default value of `sizeof(int) * 8` when size is not specified see dwarf_loader.c:die__create_new_enumeration). Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20221101235413.1824260-1-eddyz87@gmail.com

During the error recovery sequence, the rtnl_lock is not held for the entire duration and some datastructures may be freed during the sequence. Check for the BNXT_STATE_OPEN flag instead of netif_running() to ensure that the device is fully operational before proceeding to reconfigure the coalescing settings. This will fix a possible crash like this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 10 PID: 181276 Comm: ethtool Kdump: loaded Tainted: G IOE --------- - - 4.18.0-348.el8.x86_64 #1 Hardware name: Dell Inc. PowerEdge R740/0F9N89, BIOS 2.3.10 08/15/2019 RIP: 0010:bnxt_hwrm_set_coal+0x1fb/0x2a0 [bnxt_en] Code: c2 66 83 4e 22 08 66 89 46 1c e8 10 cb 00 00 41 83 c6 01 44 39 b3 68 01 00 00 0f 8e a3 00 00 00 48 8b 93 c8 00 00 00 49 63 c6 <48> 8b 2c c2 48 8b 85 b8 02 00 00 48 85 c0 74 2e 48 8b 74 24 08 f6 RSP: 0018:ffffb11c8dcaba50 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8d168a8b0ac0 RCX: 00000000000000c5 RDX: 0000000000000000 RSI: ffff8d162f72c000 RDI: ffff8d168a8b0b28 RBP: 0000000000000000 R08: b6e1f68a12e9a7eb R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000037 R12: ffff8d168a8b109c R13: ffff8d168a8b10aa R14: 0000000000000000 R15: ffffffffc01ac4e0 FS: 00007f3852e4c740(0000) GS:ffff8d24c0080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000041b3ee003 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ethnl_set_coalesce+0x3ce/0x4c0 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? coalesce_fill_reply+0x480/0x480 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? syscall_trace_enter+0x1d3/0x2c0 ? __audit_syscall_exit+0x249/0x2a0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f38524163bb Fixes: 2151fe0 ("bnxt_en: Handle RESET_NOTIFY async event from firmware.") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>

It causes NULL pointer dereference when testing as following: (a) use syscall(__NR_socket, 0x10ul, 3ul, 0) to create netlink socket. (b) use syscall(__NR_sendmsg, ...) to create bond link device and vxcan link device, and bind vxcan device to bond device (can also use ifenslave command to bind vxcan device to bond device). (c) use syscall(__NR_socket, 0x1dul, 3ul, 1) to create CAN socket. (d) use syscall(__NR_bind, ...) to bind the bond device to CAN socket. The bond device invokes the can-raw protocol registration interface to receive CAN packets. However, ml_priv is not allocated to the dev, dev_rcv_lists is assigned to NULL in can_rx_register(). In this case, it will occur the NULL pointer dereference issue. The following is the stack information: BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 122a4067 P4D 122a4067 PUD 1223c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP RIP: 0010:can_rx_register+0x12d/0x1e0 Call Trace: <TASK> raw_enable_filters+0x8d/0x120 raw_enable_allfilters+0x3b/0x130 raw_bind+0x118/0x4f0 __sys_bind+0x163/0x1a0 __x64_sys_bind+0x1e/0x30 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> Fixes: 4e096a1 ("net: introduce CAN specific pointer in the struct net_device") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/all/20221028085650.170470-1-shaozhengchao@huawei.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

If lapb_register() failed when lapb device goes to up for the first time, the NAPI is not disabled. As a result, the invalid opcode issue is reported when the lapb device goes to up for the second time. The stack info is as follows: [ 1958.311422][T11356] kernel BUG at net/core/dev.c:6442! [ 1958.312206][T11356] invalid opcode: 0000 [#1] PREEMPT SMP KASAN [ 1958.315979][T11356] RIP: 0010:napi_enable+0x16a/0x1f0 [ 1958.332310][T11356] Call Trace: [ 1958.332817][T11356] <TASK> [ 1958.336135][T11356] lapbeth_open+0x18/0x90 [ 1958.337446][T11356] __dev_open+0x258/0x490 [ 1958.341672][T11356] __dev_change_flags+0x4d4/0x6a0 [ 1958.345325][T11356] dev_change_flags+0x93/0x160 [ 1958.346027][T11356] devinet_ioctl+0x1276/0x1bf0 [ 1958.346738][T11356] inet_ioctl+0x1c8/0x2d0 [ 1958.349638][T11356] sock_ioctl+0x5d1/0x750 [ 1958.356059][T11356] __x64_sys_ioctl+0x3ec/0x1790 [ 1958.365594][T11356] do_syscall_64+0x35/0x80 [ 1958.366239][T11356] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 1958.377381][T11356] </TASK> Fixes: 514e115 ("net: x25: Queue received packets in the drivers instead of per-CPU queues") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221107011445.207372-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Out test found a following problem in kernel 5.10, and the same problem should exist in mainline: BUG: kernel NULL pointer dereference, address: 0000000000000094 PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 7 PID: 155 Comm: kworker/7:1 Not tainted 5.10.0-01932-g19e0ace2ca1d-dirty 4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-b4 Workqueue: kthrotld blk_throtl_dispatch_work_fn RIP: 0010:bfq_bio_bfqg+0x52/0xc0 Code: 94 00 00 00 00 75 2e 48 8b 40 30 48 83 05 35 06 c8 0b 01 48 85 c0 74 3d 4b RSP: 0018:ffffc90001a1fba0 EFLAGS: 00010002 RAX: ffff888100d60400 RBX: ffff8881132e7000 RCX: 0000000000000000 RDX: 0000000000000017 RSI: ffff888103580a18 RDI: ffff888103580a18 RBP: ffff8881132e7000 R08: 0000000000000000 R09: ffffc90001a1fe10 R10: 0000000000000a20 R11: 0000000000034320 R12: 0000000000000000 R13: ffff888103580a18 R14: ffff888114447000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88881fdc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000094 CR3: 0000000100cdb000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: bfq_bic_update_cgroup+0x3c/0x350 ? ioc_create_icq+0x42/0x270 bfq_init_rq+0xfd/0x1060 bfq_insert_requests+0x20f/0x1cc0 ? ioc_create_icq+0x122/0x270 blk_mq_sched_insert_requests+0x86/0x1d0 blk_mq_flush_plug_list+0x193/0x2a0 blk_flush_plug_list+0x127/0x170 blk_finish_plug+0x31/0x50 blk_throtl_dispatch_work_fn+0x151/0x190 process_one_work+0x27c/0x5f0 worker_thread+0x28b/0x6b0 ? rescuer_thread+0x590/0x590 kthread+0x153/0x1b0 ? kthread_flush_work+0x170/0x170 ret_from_fork+0x1f/0x30 Modules linked in: CR2: 0000000000000094 ---[ end trace e2e59ac014314547 ]--- RIP: 0010:bfq_bio_bfqg+0x52/0xc0 Code: 94 00 00 00 00 75 2e 48 8b 40 30 48 83 05 35 06 c8 0b 01 48 85 c0 74 3d 4b RSP: 0018:ffffc90001a1fba0 EFLAGS: 00010002 RAX: ffff888100d60400 RBX: ffff8881132e7000 RCX: 0000000000000000 RDX: 0000000000000017 RSI: ffff888103580a18 RDI: ffff888103580a18 RBP: ffff8881132e7000 R08: 0000000000000000 R09: ffffc90001a1fe10 R10: 0000000000000a20 R11: 0000000000034320 R12: 0000000000000000 R13: ffff888103580a18 R14: ffff888114447000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88881fdc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000094 CR3: 0000000100cdb000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Root cause is quite complex: 1) use bfq elevator for the test device. 2) create a cgroup CG 3) config blk throtl in CG blkg_conf_prep blkg_create 4) create a thread T1 and issue async io in CG: bio_init bio_associate_blkg ... submit_bio submit_bio_noacct blk_throtl_bio -> io is throttled // io submit is done 5) switch elevator: bfq_exit_queue blkcg_deactivate_policy list_for_each_entry(blkg, &q->blkg_list, q_node) blkg->pd[] = NULL // bfq policy is removed 5) thread t1 exist, then remove the cgroup CG: blkcg_unpin_online blkcg_destroy_blkgs blkg_destroy list_del_init(&blkg->q_node) // blkg is removed from queue list 6) switch elevator back to bfq bfq_init_queue bfq_create_group_hierarchy blkcg_activate_policy list_for_each_entry_reverse(blkg, &q->blkg_list) // blkg is removed from list, hence bfq policy is still NULL 7) throttled io is dispatched to bfq: bfq_insert_requests bfq_init_rq bfq_bic_update_cgroup bfq_bio_bfqg bfqg = blkg_to_bfqg(blkg) // bfqg is NULL because bfq policy is NULL The problem is only possible in bfq because only bfq can be deactivated and activated while queue is online, while others can only be deactivated while the device is removed. Fix the problem in bfq by checking if blkg is online before calling blkg_to_bfqg(). Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221108103434.2853269-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>

…ging The following bug is reported to be triggered when starting X on x86-32 system with i915: [ 225.777375] kernel BUG at mm/memory.c:2664! [ 225.777391] invalid opcode: 0000 [#1] PREEMPT SMP [ 225.777405] CPU: 0 PID: 2402 Comm: Xorg Not tainted 6.1.0-rc3-bdg+ #86 [ 225.777415] Hardware name: /8I865G775-G, BIOS F1 08/29/2006 [ 225.777421] EIP: __apply_to_page_range+0x24d/0x31c [ 225.777437] Code: ff ff 8b 55 e8 8b 45 cc e8 0a 11 ec ff 89 d8 83 c4 28 5b 5e 5f 5d c3 81 7d e0 a0 ef 96 c1 74 ad 8b 45 d0 e8 2d 83 49 00 eb a3 <0f> 0b 25 00 f0 ff ff 81 eb 00 00 00 40 01 c3 8b 45 ec 8b 00 e8 76 [ 225.777446] EAX: 00000001 EBX: c53a3b58 ECX: b5c00000 EDX: c258aa00 [ 225.777454] ESI: b5c00000 EDI: b5900000 EBP: c4b0fdb4 ESP: c4b0fd80 [ 225.777462] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 EFLAGS: 00010202 [ 225.777470] CR0: 80050033 CR2: b5900000 CR3: 053a3000 CR4: 000006d0 [ 225.777479] Call Trace: [ 225.777486] ? i915_memcpy_init_early+0x63/0x63 [i915] [ 225.777684] apply_to_page_range+0x21/0x27 [ 225.777694] ? i915_memcpy_init_early+0x63/0x63 [i915] [ 225.777870] remap_io_mapping+0x49/0x75 [i915] [ 225.778046] ? i915_memcpy_init_early+0x63/0x63 [i915] [ 225.778220] ? mutex_unlock+0xb/0xd [ 225.778231] ? i915_vma_pin_fence+0x6d/0xf7 [i915] [ 225.778420] vm_fault_gtt+0x2a9/0x8f1 [i915] [ 225.778644] ? lock_is_held_type+0x56/0xe7 [ 225.778655] ? lock_is_held_type+0x7a/0xe7 [ 225.778663] ? 0xc1000000 [ 225.778670] __do_fault+0x21/0x6a [ 225.778679] handle_mm_fault+0x708/0xb21 [ 225.778686] ? mt_find+0x21e/0x5ae [ 225.778696] exc_page_fault+0x185/0x705 [ 225.778704] ? doublefault_shim+0x127/0x127 [ 225.778715] handle_exception+0x130/0x130 [ 225.778723] EIP: 0xb700468a Recently pud_huge() got aware of non-present entry by commit 3a194f3 ("mm/hugetlb: make pud_huge() and follow_huge_pud() aware of non-present pud entry") to handle some special states of gigantic page. However, it's overlooked that pud_none() always returns false when running with 2-level paging, and as a result pud_huge() can return true pointlessly. Introduce "#if CONFIG_PGTABLE_LEVELS > 2" to pud_huge() to deal with this. Link: https://lkml.kernel.org/r/20221107021010.2449306-1-naoya.horiguchi@linux.dev Fixes: 3a194f3 ("mm/hugetlb: make pud_huge() and follow_huge_pud() aware of non-present pud entry") Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: David Hildenbrand <david@redhat.com> Cc: Liu Shixin <liushixin2@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Yang Shi <shy828301@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

…e-during-reload' Jiri Pirko says: ==================== net: devlink: move netdev notifier block to dest namespace during reload Patch #1 is just a dependency of patch #2, which is the actual fix. ==================== Link: https://lore.kernel.org/r/20221108132208.938676-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Petr Machata says: ==================== mlxsw: Add 802.1X and MAB offload support This patchset adds 802.1X [1] and MAB [2] offload support in mlxsw. Patches #1-#3 add the required switchdev interfaces. Patches #4-#5 add the required packet traps for 802.1X. Patches #6-#10 are small preparations in mlxsw. Patch #11 adds locked bridge port support in mlxsw. Patches #12-#15 add mlxsw selftests. The patchset was also tested with the generic forwarding selftest ('bridge_locked_port.sh'). [1] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=a21d9a670d81103db7f788de1a4a4a6e4b891a0b [2] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=a35ec8e38cdd1766f29924ca391a01de20163931 ==================== Link: https://lore.kernel.org/r/cover.1667902754.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Resolve forward declarations that don't take part in type graphs comparisons if declaration name is unambiguous. Example: CU #1: struct foo; // standalone forward declaration struct foo *some_global; CU #2: struct foo { int x; }; struct foo *another_global; The `struct foo` from CU #1 is not a part of any definition that is compared against another definition while `btf_dedup_struct_types` processes structural types. The the BTF after `btf_dedup_struct_types` the BTF looks as follows: [1] STRUCT 'foo' size=4 vlen=1 ... [2] INT 'int' size=4 ... [3] PTR '(anon)' type_id=1 [4] FWD 'foo' fwd_kind=struct [5] PTR '(anon)' type_id=4 This commit adds a new pass `btf_dedup_resolve_fwds`, that maps such forward declarations to structs or unions with identical name in case if the name is not ambiguous. The pass is positioned before `btf_dedup_ref_types` so that types [3] and [5] could be merged as a same type after [1] and [4] are merged. The final result for the example above looks as follows: [1] STRUCT 'foo' size=4 vlen=1 'x' type_id=2 bits_offset=0 [2] INT 'int' size=4 bits_offset=0 nr_bits=32 encoding=SIGNED [3] PTR '(anon)' type_id=1 For defconfig kernel with BTF enabled this removes 63 forward declarations. Examples of removed declarations: `pt_regs`, `in6_addr`. The running time of `btf__dedup` function is increased by about 3%. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20221109142611.879983-3-eddyz87@gmail.com

Eduard Zingerman says: ==================== The patch-set is consists of the following parts: - An update for libbpf's hashmap interface from void* -> void* to a polymorphic one, allowing to use both long and void* keys and values w/o additional casts. Interface functions are hidden behind auxiliary macro that add casts as necessary. This simplifies many use cases in libbpf as hashmaps there are mostly integer to integer and required awkward looking incantations like `(void *)(long)off` previously. Also includes updates for perf as it copies map implementation from libbpf. - A change to `lib/bpf/btf.c:btf__dedup` that adds a new pass named "Resolve unambiguous forward declaration". This pass builds a hashmap `name_off -> uniquely named struct or union` and uses it to replace FWD types by structs or unions. This is necessary for corner cases when FWD is not used as a part of some struct or union definition de-duplicated by `btf_dedup_struct_types`. The goal of the patch-set is to resolve forward declarations that don't take part in type graphs comparisons if declaration name is unambiguous. Example: CU #1: struct foo; // standalone forward declaration struct foo *some_global; CU #2: struct foo { int x; }; struct foo *another_global; Currently the de-duplicated BTF for this example looks as follows: [1] STRUCT 'foo' size=4 vlen=1 ... [2] INT 'int' size=4 ... [3] PTR '(anon)' type_id=1 [4] FWD 'foo' fwd_kind=struct [5] PTR '(anon)' type_id=4 The goal of this patch-set is to simplify it as follows: [1] STRUCT 'foo' size=4 vlen=1 'x' type_id=2 bits_offset=0 [2] INT 'int' size=4 bits_offset=0 nr_bits=32 encoding=SIGNED [3] PTR '(anon)' type_id=1 For defconfig kernel with BTF enabled this removes 63 forward declarations. For allmodconfig kernel with BTF enabled this removes ~5K out of ~21K forward declarations in ko objects. This unlocks some additional de-duplication in ko objects, but impact is tiny: ~13K less BTF ids out of ~2M. Changelog: v3 -> v4 Changes suggested by Andrii: - hashmap interface rework to allow use of integer and pointer keys an values w/o casts as suggested in [1]. v2 -> v3 Changes suggested by Andrii: - perf's util/hashtable.{c,h} are synchronized with libbpf implementation, perf's source code updated accordingly; - changes to libbpf, bpf selftests and perf are combined in a single patch to simplify bisecting; - hashtable interface updated to be long -> long instead of uintptr_t -> uintptr_t; - btf_dedup_resolve_fwds updated to correctly use IS_ERR / PTR_ERR macro; - test cases for btf_dedup_resolve_fwds are updated for better clarity. v1 -> v2 - Style fixes in btf_dedup_resolve_fwd and btf_dedup_resolve_fwds as suggested by Alan. [v1] https://lore.kernel.org/bpf/20221102110905.2433622-1-eddyz87@gmail.com/ [v2] https://lore.kernel.org/bpf/20221103033430.2611623-1-eddyz87@gmail.com/ [v3] https://lore.kernel.org/bpf/20221106202910.4193104-1-eddyz87@gmail.com/ [1] https://lore.kernel.org/bpf/CAEf4BzZ8KFneEJxFAaNCCFPGqp20hSpS2aCj76uRk3-qZUH5xg@mail.gmail.com/ ==================== Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

The following panic is observed when bringing up (veth_open) a veth device that has an XDP program attached. [ 61.519185] kernel BUG at net/core/dev.c:6442! [ 61.519456] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 61.519752] CPU: 0 PID: 408 Comm: ip Tainted: G W 6.1.0-rc2-185930-gd9095f92950b-dirty vvfedorenko#26 [ 61.520288] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [ 61.520806] RIP: 0010:napi_enable+0x3d/0x40 [ 61.521077] Code: f6 f6 80 61 08 00 00 02 74 0d 48 83 bf 88 01 00 00 00 74 03 80 cd 01 48 89 d0 f0 48 0f b1 4f 10 48 39 c2 75 c8 c3 cc cc cc cc <0f> 0b 90 48 8b 87 b0 00 00 00 48 81 c7 b0 00 00 00 45 31 c0 48 39 [ 61.522226] RSP: 0018:ffffbc9800cc36f8 EFLAGS: 00010246 [ 61.522557] RAX: 0000000000000001 RBX: 0000000000000300 RCX: 0000000000000001 [ 61.523004] RDX: 0000000000000010 RSI: ffffffff8b0de852 RDI: ffff9f03848e5000 [ 61.523452] RBP: 0000000000000000 R08: 0000000000000800 R09: 0000000000000000 [ 61.523899] R10: ffff9f0384a96800 R11: ffffffffffa48061 R12: ffff9f03849c3000 [ 61.524345] R13: 0000000000000300 R14: ffff9f03848e5000 R15: 0000001000000100 [ 61.524792] FS: 00007f58cb64d2c0(0000) GS:ffff9f03bbc00000(0000) knlGS:0000000000000000 [ 61.525301] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 61.525673] CR2: 00007f6cc629b498 CR3: 000000010498c000 CR4: 00000000000006f0 [ 61.526121] Call Trace: [ 61.526284] <TASK> [ 61.526425] __veth_napi_enable_range+0xd6/0x230 [ 61.526723] veth_enable_xdp+0xd0/0x160 [ 61.526969] veth_open+0x2e/0xc0 [ 61.527180] __dev_open+0xe2/0x1b0 [ 61.527405] __dev_change_flags+0x1a1/0x210 [ 61.527673] dev_change_flags+0x1c/0x60 This happens because we are calling veth_napi_enable() on already enabled queues. The root cause is in commit 2e0de63 changed the control logic dropping this case, if (priv->_xdp_prog) { err = veth_enable_xdp(dev); if (err) return err; - } else if (veth_gro_requested(dev)) { + /* refer to the logic in veth_xdp_set() */ + if (!rtnl_dereference(peer_rq->napi)) { + err = veth_napi_enable(peer); + if (err) + return err; + } so that now veth_napi_enable is called if the peer has not yet initialiazed its peer_rq->napi. The issue is this will happen even if the NIC is not up. Then in veth_enable_xdp just above we have similar path, veth_enable_xdp napi_already_on = (dev->flags & IFF_UP) && rcu_access_pointer(rq->napi) err = veth_enable_xdp_range(dev, 0, dev->real_num_rx_queues, napi_already_on); The trouble is an xdp prog is assigned before bringing the device up each of the veth_open path will enable the peers xdp napi structs. But then when we bring the peer up it will similar try to enable again because from veth_open the IFF_UP flag is not set until after the op in __dev_open so we believe napi_alread_on = false. To fix this just drop the IFF_UP test and rely on checking if the napi struct is enabled. This also matches the peer check in veth_xdp for disabling. To reproduce run ./test_xdp_meta.sh I found adding Cilium/Tetragon tests for XDP. Fixes: 2e0de63 ("veth: Avoid drop packets when xdp_redirect performs") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20221108221650.808950-2-john.fastabend@gmail.com Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Yang Yingliang says: ==================== stmmac: dwmac-loongson: fixes three leaks patch #2 fixes missing pci_disable_device() in the error path in probe() patch #1 and pach #3 fix missing pci_disable_msi() and of_node_put() in error and remove() path. ==================== Link: https://lore.kernel.org/r/20221108114647.4144952-1-yangyingliang@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Ampere Altra machines are reported to misbehave when the SetTime() EFI runtime service is called after ExitBootServices() but before calling SetVirtualAddressMap(). Given that the latter is horrid, pointless and explicitly documented as optional by the EFI spec, we no longer invoke it at boot if the configured size of the VA space guarantees that the EFI runtime memory regions can remain mapped 1:1 like they are at boot time. On Ampere Altra machines, this results in SetTime() calls issued by the rtc-efi driver triggering synchronous exceptions during boot. We can now recover from those without bringing down the system entirely, due to commit 23715a2 ("arm64: efi: Recover from synchronous exceptions occurring in firmware"). However, it would be better to avoid the issue entirely, given that the firmware appears to remain in a funny state after this. So attempt to identify these machines based on the 'family' field in the type #1 SMBIOS record, and call SetVirtualAddressMap() unconditionally in that case. Tested-by: Alexandru Elisei <alexandru.elisei@gmail.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Currently, RISC-V sets up reserved memory using the "early" copy of the device tree. As a result, when trying to get a reserved memory region using of_reserved_mem_lookup(), the pointer to reserved memory regions is using the early, pre-virtual-memory address which causes a kernel panic when trying to use the buffer's name: Unable to handle kernel paging request at virtual address 00000000401c31ac Oops [#1] Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 6.0.0-rc1-00001-g0d9d6953d834 #1 Hardware name: Microchip PolarFire-SoC Icicle Kit (DT) epc : string+0x4a/0xea ra : vsnprintf+0x1e4/0x336 epc : ffffffff80335ea0 ra : ffffffff80338936 sp : ffffffff81203be0 gp : ffffffff812e0a98 tp : ffffffff8120de40 t0 : 0000000000000000 t1 : ffffffff81203e28 t2 : 7265736572203a46 s0 : ffffffff81203c20 s1 : ffffffff81203e28 a0 : ffffffff81203d22 a1 : 0000000000000000 a2 : ffffffff81203d08 a3 : 0000000081203d21 a4 : ffffffffffffffff a5 : 00000000401c31ac a6 : ffff0a00ffffff04 a7 : ffffffffffffffff s2 : ffffffff81203d08 s3 : ffffffff81203d00 s4 : 0000000000000008 s5 : ffffffff000000ff s6 : 0000000000ffffff s7 : 00000000ffffff00 s8 : ffffffff80d9821a s9 : ffffffff81203d22 s10: 0000000000000002 s11: ffffffff80d9821c t3 : ffffffff812f3617 t4 : ffffffff812f3617 t5 : ffffffff812f3618 t6 : ffffffff81203d08 status: 0000000200000100 badaddr: 00000000401c31ac cause: 000000000000000d [<ffffffff80338936>] vsnprintf+0x1e4/0x336 [<ffffffff80055ae2>] vprintk_store+0xf6/0x344 [<ffffffff80055d86>] vprintk_emit+0x56/0x192 [<ffffffff80055ed8>] vprintk_default+0x16/0x1e [<ffffffff800563d2>] vprintk+0x72/0x80 [<ffffffff806813b2>] _printk+0x36/0x50 [<ffffffff8068af48>] print_reserved_mem+0x1c/0x24 [<ffffffff808057ec>] paging_init+0x528/0x5bc [<ffffffff808031ae>] setup_arch+0xd0/0x592 [<ffffffff8080070e>] start_kernel+0x82/0x73c early_init_fdt_scan_reserved_mem() takes no arguments as it operates on initial_boot_params, which is populated by early_init_dt_verify(). On RISC-V, early_init_dt_verify() is called twice. Once, directly, in setup_arch() if CONFIG_BUILTIN_DTB is not enabled and once indirectly, very early in the boot process, by parse_dtb() when it calls early_init_dt_scan_nodes(). This first call uses dtb_early_va to set initial_boot_params, which is not usable later in the boot process when early_init_fdt_scan_reserved_mem() is called. On arm64 for example, the corresponding call to early_init_dt_scan_nodes() uses fixmap addresses and doesn't suffer the same fate. Move early_init_fdt_scan_reserved_mem() further along the boot sequence, after the direct call to early_init_dt_verify() in setup_arch() so that the names use the correct virtual memory addresses. The above supposed that CONFIG_BUILTIN_DTB was not set, but should work equally in the case where it is - unflatted_and_copy_device_tree() also updates initial_boot_params. Reported-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com> Reported-by: Evgenii Shatokhin <e.shatokhin@yadro.com> Link: https://lore.kernel.org/linux-riscv/f8e67f82-103d-156c-deb0-d6d6e2756f5e@microchip.com/ Fixes: 922b037 ("riscv: Fix memblock reservation for device tree blob") Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Evgenii Shatokhin <e.shatokhin@yadro.com> Link: https://lore.kernel.org/r/20221107151524.3941467-1-conor.dooley@microchip.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

CQE compression feature improves performance by reducing PCI bandwidth bottleneck on CQEs write. Enhanced CQE compression introduced in ConnectX-6 and it aims to reduce CPU utilization of SW side packets decompression by eliminating the need to rewrite ownership bit, which is likely to cost a cache-miss, is replaced by validity byte handled solely by HW. Another advantage of the enhanced feature is that session packets are available to SW as soon as a single CQE slot is filled, instead of waiting for session to close, this improves packet latency from NIC to host. Performance: Following are tested scenarios and reults comparing basic and enahnced CQE compression. setup: IXIA 100GbE connected directly to port 0 and port 1 of ConnectX-6 Dx 100GbE dual port. Case #1 RX only, single flow goes to single queue: IRQ rate reduced by ~ 30%, CPU utilization improved by 2%. Case #2 IP forwarding from port 1 to port 0 single flow goes to single queue: Avg latency improved from 60us to 21us, frame loss improved from 0.5% to 0.0%. Case #3 IP forwarding from port 1 to port 0 Max Throughput IXIA sends 100%, 8192 UDP flows, goes to 24 queues: Enhanced is equal or slightly better than basic. Testing the basic compression feature with this patch shows there is no perfrormance degradation of the basic compression feature. Signed-off-by: Ofer Levi <oferle@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

…x/kernel/git/efi/efi Pull EFI fixes from Ard Biesheuvel: - Force the use of SetVirtualAddressMap() on Ampera Altra arm64 machines, which crash in SetTime() if no virtual remapping is used This is the first time we've added an SMBIOS based quirk on arm64, but fortunately, we can just call a EFI protocol to grab the type #1 SMBIOS record when running in the stub, so we don't need all the machinery we have in the kernel proper to parse SMBIOS data. - Drop a spurious warning on misaligned runtime regions when using 16k or 64k pages on arm64 * tag 'efi-fixes-for-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: arm64: efi: Fix handling of misaligned runtime regions and drop warning arm64: efi: Force the use of SetVirtualAddressMap() on Altra machines

If rxrpc sees an IPv6 address, it assumes it can call udpv6_sendmsg() on it - even if it got it on an IPv4 socket. Fix do_udp_sendmsg() to give an error in such a case. general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] ... RIP: 0010:ipv6_addr_v4mapped include/net/ipv6.h:749 [inline] RIP: 0010:udpv6_sendmsg+0xd0a/0x2c70 net/ipv6/udp.c:1361 ... Call Trace: do_udp_sendmsg net/rxrpc/output.c:27 [inline] do_udp_sendmsg net/rxrpc/output.c:21 [inline] rxrpc_send_abort_packet+0x73b/0x860 net/rxrpc/output.c:367 rxrpc_release_calls_on_socket+0x211/0x300 net/rxrpc/call_object.c:595 rxrpc_release_sock net/rxrpc/af_rxrpc.c:886 [inline] rxrpc_release+0x263/0x5a0 net/rxrpc/af_rxrpc.c:917 __sock_release+0xcd/0x280 net/socket.c:650 sock_close+0x18/0x20 net/socket.c:1365 __fput+0x27c/0xa90 fs/file_table.c:320 task_work_run+0x16b/0x270 kernel/task_work.c:179 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0xb35/0x2a20 kernel/exit.c:820 do_group_exit+0xd0/0x2a0 kernel/exit.c:950 __do_sys_exit_group kernel/exit.c:961 [inline] __se_sys_exit_group kernel/exit.c:959 [inline] __x64_sys_exit_group+0x3a/0x50 kernel/exit.c:959 Fixes: ed472b0 ("rxrpc: Call udp_sendmsg() directly") Reported-by: Eric Dumazet <edumazet@google.com> Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org

…ting Currently ffa_drv->remove() is called unconditionally from ffa_device_remove(). Since the driver registration doesn't check for it and allows it to be registered without .remove callback, we need to check for the presence of it before executing it from ffa_device_remove() to above a NULL pointer dereference like the one below: | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 | Mem abort info: | ESR = 0x0000000086000004 | EC = 0x21: IABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | FSC = 0x04: level 0 translation fault | user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881cc8000 | [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 | Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP | CPU: 3 PID: 130 Comm: rmmod Not tainted 6.3.0-rc7 #6 | Hardware name: FVP Base RevC (DT) | pstate: 63402809 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=-c) | pc : 0x0 | lr : ffa_device_remove+0x20/0x2c | Call trace: | 0x0 | device_release_driver_internal+0x16c/0x260 | driver_detach+0x90/0xd0 | bus_remove_driver+0xdc/0x11c | driver_unregister+0x30/0x54 | ffa_driver_unregister+0x14/0x20 | cleanup_module+0x18/0xeec | __arm64_sys_delete_module+0x234/0x378 | invoke_syscall+0x40/0x108 | el0_svc_common+0xb4/0xf0 | do_el0_svc+0x30/0xa4 | el0_svc+0x2c/0x7c | el0t_64_sync_handler+0x84/0xf0 | el0t_64_sync+0x190/0x194 Fixes: 244f5d5 ("firmware: arm_ffa: Add missing remove callback to ffa_bus_type") Link: https://lore.kernel.org/r/20230419-ffa_fixes_6-4-v2-1-d9108e43a176@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

After commit 27a2195 ("power: supply: core: auto-exposure of simple-battery data") we call power_supply_get_battery_info() in __power_supply_register(), but it causes test_battery crash with NULL pointer: [ 7.524846] __power_supply_register: Expected proper parent device for 'test_battery' [ 7.524856] CPU 3 Unable to handle kernel paging request at virtual address 0000000000000278, era == 9000000002fb279c, ra == 9000000003173434 [ 7.524862] Oops[#1]: [ 7.524866] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 6.3.0+ #524 [ 7.524870] Hardware name: Loongson Loongson-3A5000-7A1000-1w-CRB/Loongson-LS3A5000-7A1000-1w-CRB, BIOS vUDK2018-LoongArch-V2.0.0-prebeta9 10/21/2022 [ 7.524872] pc 9000000002fb279c ra 9000000003173434 tp 90000001001f0000 sp 90000001001f3c00 [ 7.524875] a0 0000000000000000 a1 0000000000000000 a2 0000000000000000 a3 9000000004553e13 [ 7.524878] a4 9000000004553e16 a5 ffffffffffffffff a6 9000000003fd0948 a7 0000000000000030 [ 7.524881] t0 9000000003173434 t1 90000000035e2c00 t2 0000000000000001 t3 00000000fffff2b0 [ 7.524883] t4 0000000000000007 t5 fffffffffffffffe t6 0000000000000000 t7 0000000000000010 [ 7.524886] t8 00000000000000b4 u0 00000001c0840c76 s9 0000000000000000 s0 0000000000000000 [ 7.524889] s1 900000000370c458 s2 0000000000000001 s3 9000000101f81000 s4 9000000101f81038 [ 7.524891] s5 9000000101f813a0 s6 900000000370c398 s7 9000000003eebd18 s8 90000000037c0070 [ 7.524894] ra: 9000000003173434 power_supply_get_battery_info+0xe4/0x710 [ 7.591224] ERA: 9000000002fb279c __dev_fwnode+0x8/0x20 [ 7.853583] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 7.859740] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 7.864073] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 7.868839] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 7.873430] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 7.878884] BADV: 0000000000000278 [ 7.882346] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 7.888056] Modules linked in: [ 7.891088] Process swapper/0 (pid: 1, threadinfo=0000000091357ee8, task=00000000313d98cb) [ 7.899307] Stack : 00000000000000b4 900000000279aca8 0000000000000001 0000000000000000 [ 7.907274] 0000000000000049 0000000000000408 9000000100008c00 90000000035b6370 [ 7.915238] 900000000b801080 90000000029a440c 9000000003eb4680 9000000003eb4680 [ 7.923202] 9000000101f81038 900000000357cdcc 0000000000000001 900000000370c458 [ 7.931166] 9000000101f81000 90000000037c0070 9000000003eebd18 900000000370c398 [ 7.939131] 90000000045f4530 9000000101f81038 0000000000000000 0000000000000001 [ 7.947095] 900000000370c458 9000000101f81000 0000000000000000 9000000003173e64 [ 7.955059] 0000000000000026 9000000003de3880 9000000100562040 900000000357e07c [ 7.963023] 000000000000026f 0000000000000001 90000001001f3d68 fffffffffffffff5 [ 7.970987] 90000000036d2ca8 90000000027429d8 90000000037c0030 0000000000000001 [ 7.978951] ... [ 7.981379] Call Trace: [ 7.981382] [<9000000002fb279c>] __dev_fwnode+0x8/0x20 [ 7.988916] [<9000000003173434>] power_supply_get_battery_info+0xe4/0x710 [ 7.995666] [<9000000003173e64>] __power_supply_register+0x404/0x580 [ 8.001984] [<900000000379d368>] test_power_init+0x6c/0x124 [ 8.007527] [<90000000026e08f8>] do_one_initcall+0x58/0x1ec [ 8.013066] [<9000000003761614>] kernel_init_freeable+0x290/0x310 [ 8.019127] [<90000000035b40e8>] kernel_init+0x24/0x11c [ 8.024324] [<90000000026e2048>] ret_from_kernel_thread+0xc/0xa4 [ 8.030295] [ 8.031769] Code: 4c000020 0015002c 03400000 <28c9e08c> 40000d80 02c06184 4c000020 28ca0084 4c000020 Root cause: psy->dev.parent is NULL in power_supply_get_battery_info(), so change the else branch to be 'else if (psy->dev.parent)' and return -ENOENT if psy->dev.parent is NULL. Fixes: 27a2195 ("power: supply: core: auto-exposure of simple-battery data") Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Commit 349d03f ("crypto: s390 - add crypto library interface for ChaCha20") added a library interface to the s390 specific ChaCha20 implementation. However no check was added to verify if the required facilities are installed before branching into the assembler code. If compiled into the kernel, this will lead to the following crash, if vector instructions are not available: data exception: 0007 ilc:3 [#1] SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc7+ #11 Hardware name: IBM 3931 A01 704 (KVM/Linux) Krnl PSW : 0704e00180000000 000000001857277a (chacha20_vx+0x32/0x818) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 0000037f0000000a ffffffffffffff60 000000008184b000 0000000019f5c8e6 0000000000000109 0000037fffb13c58 0000037fffb13c78 0000000019bb1780 0000037fffb13c58 0000000019f5c8e6 000000008184b000 0000000000000109 00000000802d8000 0000000000000109 0000000018571ebc 0000037fffb13718 Krnl Code: 000000001857276a: c07000b1f80b larl %r7,0000000019bb1780 0000000018572770: a708000a lhi %r0,10 #0000000018572774: e78950000c36 vlm %v24,%v25,0(%r5),0 >000000001857277a: e7a060000806 vl %v26,0(%r6),0 0000000018572780: e7bf70004c36 vlm %v27,%v31,0(%r7),4 0000000018572786: e70b00000456 vlr %v0,%v27 000000001857278c: e71800000456 vlr %v1,%v24 0000000018572792: e74b00000456 vlr %v4,%v27 Call Trace: [<000000001857277a>] chacha20_vx+0x32/0x818 Last Breaking-Event-Address: [<0000000018571eb6>] chacha20_crypt_s390.constprop.0+0x6e/0xd8 ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Fix this by adding a missing MACHINE_HAS_VX check. Fixes: 349d03f ("crypto: s390 - add crypto library interface for ChaCha20") Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Cc: <stable@vger.kernel.org> # 5.19+ Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> [agordeev@linux.ibm.com: remove duplicates in commit message] Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

Our CI system caught a lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 6.3.0-rc7+ #1167 Not tainted ------------------------------------------------------ kswapd0/46 is trying to acquire lock: ffff8c6543abd650 (sb_internal#2){++++}-{0:0}, at: btrfs_commit_inode_delayed_inode+0x5f/0x120 but task is already holding lock: ffffffffabe61b40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x4aa/0x7a0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire+0xa5/0xe0 kmem_cache_alloc+0x31/0x2c0 alloc_extent_state+0x1d/0xd0 __clear_extent_bit+0x2e0/0x4f0 try_release_extent_mapping+0x216/0x280 btrfs_release_folio+0x2e/0x90 invalidate_inode_pages2_range+0x397/0x470 btrfs_cleanup_dirty_bgs+0x9e/0x210 btrfs_cleanup_one_transaction+0x22/0x760 btrfs_commit_transaction+0x3b7/0x13a0 create_subvol+0x59b/0x970 btrfs_mksubvol+0x435/0x4f0 __btrfs_ioctl_snap_create+0x11e/0x1b0 btrfs_ioctl_snap_create_v2+0xbf/0x140 btrfs_ioctl+0xa45/0x28f0 __x64_sys_ioctl+0x88/0xc0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc -> #0 (sb_internal#2){++++}-{0:0}: __lock_acquire+0x1435/0x21a0 lock_acquire+0xc2/0x2b0 start_transaction+0x401/0x730 btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_evict_inode+0x292/0x3d0 evict+0xcc/0x1d0 inode_lru_isolate+0x14d/0x1e0 __list_lru_walk_one+0xbe/0x1c0 list_lru_walk_one+0x58/0x80 prune_icache_sb+0x39/0x60 super_cache_scan+0x161/0x1f0 do_shrink_slab+0x163/0x340 shrink_slab+0x1d3/0x290 shrink_node+0x300/0x720 balance_pgdat+0x35c/0x7a0 kswapd+0x205/0x410 kthread+0xf0/0x120 ret_from_fork+0x29/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(sb_internal#2); lock(fs_reclaim); lock(sb_internal#2); *** DEADLOCK *** 3 locks held by kswapd0/46: #0: ffffffffabe61b40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x4aa/0x7a0 #1: ffffffffabe50270 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x113/0x290 #2: ffff8c6543abd0e0 (&type->s_umount_key#44){++++}-{3:3}, at: super_cache_scan+0x38/0x1f0 stack backtrace: CPU: 0 PID: 46 Comm: kswapd0 Not tainted 6.3.0-rc7+ #1167 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x58/0x90 check_noncircular+0xd6/0x100 ? save_trace+0x3f/0x310 ? add_lock_to_list+0x97/0x120 __lock_acquire+0x1435/0x21a0 lock_acquire+0xc2/0x2b0 ? btrfs_commit_inode_delayed_inode+0x5f/0x120 start_transaction+0x401/0x730 ? btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_evict_inode+0x292/0x3d0 ? lock_release+0x134/0x270 ? __pfx_wake_bit_function+0x10/0x10 evict+0xcc/0x1d0 inode_lru_isolate+0x14d/0x1e0 __list_lru_walk_one+0xbe/0x1c0 ? __pfx_inode_lru_isolate+0x10/0x10 ? __pfx_inode_lru_isolate+0x10/0x10 list_lru_walk_one+0x58/0x80 prune_icache_sb+0x39/0x60 super_cache_scan+0x161/0x1f0 do_shrink_slab+0x163/0x340 shrink_slab+0x1d3/0x290 shrink_node+0x300/0x720 balance_pgdat+0x35c/0x7a0 kswapd+0x205/0x410 ? __pfx_autoremove_wake_function+0x10/0x10 ? __pfx_kswapd+0x10/0x10 kthread+0xf0/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x50 </TASK> This happens because when we abort the transaction in the transaction commit path we call invalidate_inode_pages2_range on our block group cache inodes (if we have space cache v1) and any delalloc inodes we may have. The plain invalidate_inode_pages2_range() call passes through GFP_KERNEL, which makes sense in most cases, but not here. Wrap these two invalidate callees with memalloc_nofs_save/memalloc_nofs_restore to make sure we don't end up with the fs reclaim dependency under the transaction dependency. CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

…kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.4, take #1 - Plug a race in the stage-2 mapping code where the IPA and the PA would end up being out of sync - Make better use of the bitmap API (bitmap_zero, bitmap_zalloc...) - FP/SVE/SME documentation update, in the hope that this field becomes clearer... - Add workaround for the usual Apple SEIS brokenness - Random comment fixes

Under memory pressure, we sometimes observe the following crash: [ 5694.832838] ------------[ cut here ]------------ [ 5694.842093] list_del corruption, ffff888014b6a448->next is LIST_POISON1 (dead000000000100) [ 5694.858677] WARNING: CPU: 33 PID: 418824 at lib/list_debug.c:47 __list_del_entry_valid+0x42/0x80 [ 5694.961820] CPU: 33 PID: 418824 Comm: fuse_counters.s Kdump: loaded Tainted: G S 5.19.0-0_fbk3_rc3_hoangnhatpzsdynshrv41_10870_g85a9558a25de #1 [ 5694.990194] Hardware name: Wiwynn Twin Lakes MP/Twin Lakes Passive MP, BIOS YMM16 05/24/2021 [ 5695.007072] RIP: 0010:__list_del_entry_valid+0x42/0x80 [ 5695.017351] Code: 08 48 83 c2 22 48 39 d0 74 24 48 8b 10 48 39 f2 75 2c 48 8b 51 08 b0 01 48 39 f2 75 34 c3 48 c7 c7 55 d7 78 82 e8 4e 45 3b 00 <0f> 0b eb 31 48 c7 c7 27 a8 70 82 e8 3e 45 3b 00 0f 0b eb 21 48 c7 [ 5695.054919] RSP: 0018:ffffc90027aef4f0 EFLAGS: 00010246 [ 5695.065366] RAX: 41fe484987275300 RBX: ffff888008988180 RCX: 0000000000000000 [ 5695.079636] RDX: ffff88886006c280 RSI: ffff888860060480 RDI: ffff888860060480 [ 5695.093904] RBP: 0000000000000002 R08: 0000000000000000 R09: ffffc90027aef370 [ 5695.108175] R10: 0000000000000000 R11: ffffffff82fdf1c0 R12: 0000000010000002 [ 5695.122447] R13: ffff888014b6a448 R14: ffff888014b6a420 R15: 00000000138dc240 [ 5695.136717] FS: 00007f23a7d3f740(0000) GS:ffff888860040000(0000) knlGS:0000000000000000 [ 5695.152899] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5695.164388] CR2: 0000560ceaab6ac0 CR3: 000000001c06c001 CR4: 00000000007706e0 [ 5695.178659] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5695.192927] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5695.207197] PKRU: 55555554 [ 5695.212602] Call Trace: [ 5695.217486] <TASK> [ 5695.221674] zs_map_object+0x91/0x270 [ 5695.229000] zswap_frontswap_store+0x33d/0x870 [ 5695.237885] ? do_raw_spin_lock+0x5d/0xa0 [ 5695.245899] __frontswap_store+0x51/0xb0 [ 5695.253742] swap_writepage+0x3c/0x60 [ 5695.261063] shrink_page_list+0x738/0x1230 [ 5695.269255] shrink_lruvec+0x5ec/0xcd0 [ 5695.276749] ? shrink_slab+0x187/0x5f0 [ 5695.284240] ? mem_cgroup_iter+0x6e/0x120 [ 5695.292255] shrink_node+0x293/0x7b0 [ 5695.299402] do_try_to_free_pages+0xea/0x550 [ 5695.307940] try_to_free_pages+0x19a/0x490 [ 5695.316126] __folio_alloc+0x19ff/0x3e40 [ 5695.323971] ? __filemap_get_folio+0x8a/0x4e0 [ 5695.332681] ? walk_component+0x2a8/0xb50 [ 5695.340697] ? generic_permission+0xda/0x2a0 [ 5695.349231] ? __filemap_get_folio+0x8a/0x4e0 [ 5695.357940] ? walk_component+0x2a8/0xb50 [ 5695.365955] vma_alloc_folio+0x10e/0x570 [ 5695.373796] ? walk_component+0x52/0xb50 [ 5695.381634] wp_page_copy+0x38c/0xc10 [ 5695.388953] ? filename_lookup+0x378/0xbc0 [ 5695.397140] handle_mm_fault+0x87f/0x1800 [ 5695.405157] do_user_addr_fault+0x1bd/0x570 [ 5695.413520] exc_page_fault+0x5d/0x110 [ 5695.421017] asm_exc_page_fault+0x22/0x30 After some investigation, I have found the following issue: unlike other zswap backends, zsmalloc performs the LRU list update at the object mapping time, rather than when the slot for the object is allocated. This deviation was discussed and agreed upon during the review process of the zsmalloc writeback patch series: https://lore.kernel.org/lkml/Y3flcAXNxxrvy3ZH@cmpxchg.org/ Unfortunately, this introduces a subtle bug that occurs when there is a concurrent store and reclaim, which interleave as follows: zswap_frontswap_store() shrink_worker() zs_malloc() zs_zpool_shrink() spin_lock(&pool->lock) zs_reclaim_page() zspage = find_get_zspage() spin_unlock(&pool->lock) spin_lock(&pool->lock) zspage = list_first_entry(&pool->lru) list_del(&zspage->lru) zspage->lru.next = LIST_POISON1 zspage->lru.prev = LIST_POISON2 spin_unlock(&pool->lock) zs_map_object() spin_lock(&pool->lock) if (!list_empty(&zspage->lru)) list_del(&zspage->lru) CHECK_DATA_CORRUPTION(next == LIST_POISON1) /* BOOM */ With the current upstream code, this issue rarely happens. zswap only triggers writeback when the pool is already full, at which point all further store attempts are short-circuited. This creates an implicit pseudo-serialization between reclaim and store. I am working on a new zswap shrinking mechanism, which makes interleaving reclaim and store more likely, exposing this bug. zbud and z3fold do not have this problem, because they perform the LRU list update in the alloc function, while still holding the pool's lock. This patch fixes the aforementioned bug by moving the LRU update back to zs_malloc(), analogous to zbud and z3fold. Link: https://lkml.kernel.org/r/20230505185054.2417128-1-nphamcs@gmail.com Fixes: 64f768c ("zsmalloc: add a LRU to zs_pool to keep track of zspages in LRU order") Signed-off-by: Nhat Pham <nphamcs@gmail.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjenning@redhat.com> Cc: Vitaly Wool <vitaly.wool@konsulko.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Currently in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is lower than the calculated "min" value, but greater than zero, the logic sets tx_max to dwNtbOutMaxSize. This is then used to allocate a new SKB in cdc_ncm_fill_tx_frame() where all the data is handled. For small values of dwNtbOutMaxSize the memory allocated during alloc_skb(dwNtbOutMaxSize, GFP_ATOMIC) will have the same size, due to how size is aligned at alloc time: size = SKB_DATA_ALIGN(size); size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); Thus we hit the same bug that we tried to squash with commit 2be6d4d ("net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero") Low values of dwNtbOutMaxSize do not cause an issue presently because at alloc_skb() time more memory (512b) is allocated than required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b). However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b). Consequently the SKB bounds checking semantics fails and panics: skbuff: skb_over_panic: text:ffffffff831f755b len:184 put:172 head:ffff88811f1c6c00 data:ffff88811f1c6c00 tail:0xb8 end:0x80 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:113! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 57 Comm: kworker/0:2 Not tainted 5.15.106-syzkaller-00249-g19c0ed55a470 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 Workqueue: mld mld_ifc_work RIP: 0010:skb_panic net/core/skbuff.c:113 [inline] RIP: 0010:skb_over_panic+0x14c/0x150 net/core/skbuff.c:118 [snip] Call Trace: <TASK> skb_put+0x151/0x210 net/core/skbuff.c:2047 skb_put_zero include/linux/skbuff.h:2422 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1131 [inline] cdc_ncm_fill_tx_frame+0x11ab/0x3da0 drivers/net/usb/cdc_ncm.c:1308 cdc_ncm_tx_fixup+0xa3/0x100 Deal with too low values of dwNtbOutMaxSize, clamp it in the range [USB_CDC_NCM_NTB_MIN_OUT_SIZE, CDC_NCM_NTB_MAX_SIZE_TX]. We ensure enough data space is allocated to handle CDC data by making sure dwNtbOutMaxSize is not smaller than USB_CDC_NCM_NTB_MIN_OUT_SIZE. Fixes: 289507d ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning") Cc: stable@vger.kernel.org Reported-by: syzbot+9f575a1f15fc0c01ed69@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=b982f1059506db48409d Link: https://lore.kernel.org/all/20211202143437.1411410-1-lee.jones@linaro.org/ Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230517133808.1873695-2-tudor.ambarus@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We found a crash when using SMCRv2 with 2 Mellanox ConnectX-4. It can be reproduced by: - smc_run nginx - smc_run wrk -t 32 -c 500 -d 30 http://<ip>:<port> BUG: kernel NULL pointer dereference, address: 0000000000000014 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8000000108713067 P4D 8000000108713067 PUD 151127067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 4 PID: 2441 Comm: kworker/4:249 Kdump: loaded Tainted: G W E 6.4.0-rc1+ #42 Workqueue: smc_hs_wq smc_listen_work [smc] RIP: 0010:smc_clc_send_confirm_accept+0x284/0x580 [smc] RSP: 0018:ffffb8294b2d7c78 EFLAGS: 00010a06 RAX: ffff8f1873238880 RBX: ffffb8294b2d7dc8 RCX: 0000000000000000 RDX: 00000000000000b4 RSI: 0000000000000001 RDI: 0000000000b40c00 RBP: ffffb8294b2d7db8 R08: ffff8f1815c5860c R09: 0000000000000000 R10: 0000000000000400 R11: 0000000000000000 R12: ffff8f1846f56180 R13: ffff8f1815c5860c R14: 0000000000000001 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8f1aefd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000014 CR3: 00000001027a0001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? mlx5_ib_map_mr_sg+0xa1/0xd0 [mlx5_ib] ? smcr_buf_map_link+0x24b/0x290 [smc] ? __smc_buf_create+0x4ee/0x9b0 [smc] smc_clc_send_accept+0x4c/0xb0 [smc] smc_listen_work+0x346/0x650 [smc] ? __schedule+0x279/0x820 process_one_work+0x1e5/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> During the CLC handshake, server sequentially tries available SMCRv2 and SMCRv1 devices in smc_listen_work(). If an SMCRv2 device is found. SMCv2 based link group and link will be assigned to the connection. Then assumed that some buffer assignment errors happen later in the CLC handshake, such as RMB registration failure, server will give up SMCRv2 and try SMCRv1 device instead. But the resources assigned to the connection won't be reset. When server tries SMCRv1 device, the connection creation process will be executed again. Since conn->lnk has been assigned when trying SMCRv2, it will not be set to the correct SMCRv1 link in smcr_lgr_conn_assign_link(). So in such situation, conn->lgr points to correct SMCRv1 link group but conn->lnk points to the SMCRv2 link mistakenly. Then in smc_clc_send_confirm_accept(), conn->rmb_desc->mr[link->link_idx] will be accessed. Since the link->link_idx is not correct, the related MR may not have been initialized, so crash happens. | Try SMCRv2 device first | |-> conn->lgr: assign existed SMCRv2 link group; | |-> conn->link: assign existed SMCRv2 link (link_idx may be 1 in SMC_LGR_SYMMETRIC); | |-> sndbuf & RMB creation fails, quit; | | Try SMCRv1 device then | |-> conn->lgr: create SMCRv1 link group and assign; | |-> conn->link: keep SMCRv2 link mistakenly; | |-> sndbuf & RMB creation succeed, only RMB->mr[link_idx = 0] | initialized. | | Then smc_clc_send_confirm_accept() accesses | conn->rmb_desc->mr[conn->link->link_idx, which is 1], then crash. v This patch tries to fix this by cleaning conn->lnk before assigning link. In addition, it is better to reset the connection and clean the resources assigned if trying SMCRv2 failed in buffer creation or registration. Fixes: e49300a ("net/smc: add listen processing for SMC-Rv2") Link: https://lore.kernel.org/r/20220523055056.2078994-1-liuyacan@corp.netease.com/ Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>

[ cmllamas: clean forward port from commit 015ac18be7de ("binder: fix UAF of alloc->vma in race with munmap()") in 5.10 stable. It is needed in mainline after the revert of commit a43cfc8 ("android: binder: stop saving a pointer to the VMA") as pointed out by Liam. The commit log and tags have been tweaked to reflect this. ] In commit 720c241 ("ANDROID: binder: change down_write to down_read") binder assumed the mmap read lock is sufficient to protect alloc->vma inside binder_update_page_range(). This used to be accurate until commit dd2283f ("mm: mmap: zap pages with read mmap_sem in munmap"), which now downgrades the mmap_lock after detaching the vma from the rbtree in munmap(). Then it proceeds to teardown and free the vma with only the read lock held. This means that accesses to alloc->vma in binder_update_page_range() now will race with vm_area_free() in munmap() and can cause a UAF as shown in the following KASAN trace: ================================================================== BUG: KASAN: use-after-free in vm_insert_page+0x7c/0x1f0 Read of size 8 at addr ffff16204ad00600 by task server/558 CPU: 3 PID: 558 Comm: server Not tainted 5.10.150-00001-gdc8dcf942daa #1 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2a0 show_stack+0x18/0x2c dump_stack+0xf8/0x164 print_address_description.constprop.0+0x9c/0x538 kasan_report+0x120/0x200 __asan_load8+0xa0/0xc4 vm_insert_page+0x7c/0x1f0 binder_update_page_range+0x278/0x50c binder_alloc_new_buf+0x3f0/0xba0 binder_transaction+0x64c/0x3040 binder_thread_write+0x924/0x2020 binder_ioctl+0x1610/0x2e5c __arm64_sys_ioctl+0xd4/0x120 el0_svc_common.constprop.0+0xac/0x270 do_el0_svc+0x38/0xa0 el0_svc+0x1c/0x2c el0_sync_handler+0xe8/0x114 el0_sync+0x180/0x1c0 Allocated by task 559: kasan_save_stack+0x38/0x6c __kasan_kmalloc.constprop.0+0xe4/0xf0 kasan_slab_alloc+0x18/0x2c kmem_cache_alloc+0x1b0/0x2d0 vm_area_alloc+0x28/0x94 mmap_region+0x378/0x920 do_mmap+0x3f0/0x600 vm_mmap_pgoff+0x150/0x17c ksys_mmap_pgoff+0x284/0x2dc __arm64_sys_mmap+0x84/0xa4 el0_svc_common.constprop.0+0xac/0x270 do_el0_svc+0x38/0xa0 el0_svc+0x1c/0x2c el0_sync_handler+0xe8/0x114 el0_sync+0x180/0x1c0 Freed by task 560: kasan_save_stack+0x38/0x6c kasan_set_track+0x28/0x40 kasan_set_free_info+0x24/0x4c __kasan_slab_free+0x100/0x164 kasan_slab_free+0x14/0x20 kmem_cache_free+0xc4/0x34c vm_area_free+0x1c/0x2c remove_vma+0x7c/0x94 __do_munmap+0x358/0x710 __vm_munmap+0xbc/0x130 __arm64_sys_munmap+0x4c/0x64 el0_svc_common.constprop.0+0xac/0x270 do_el0_svc+0x38/0xa0 el0_svc+0x1c/0x2c el0_sync_handler+0xe8/0x114 el0_sync+0x180/0x1c0 [...] ================================================================== To prevent the race above, revert back to taking the mmap write lock inside binder_update_page_range(). One might expect an increase of mmap lock contention. However, binder already serializes these calls via top level alloc->mutex. Also, there was no performance impact shown when running the binder benchmark tests. Fixes: c0fd210 ("Revert "android: binder: stop saving a pointer to the VMA"") Fixes: dd2283f ("mm: mmap: zap pages with read mmap_sem in munmap") Reported-by: Jann Horn <jannh@google.com> Closes: https://lore.kernel.org/all/20230518144052.xkj6vmddccq4v66b@revolver Cc: <stable@vger.kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Liam Howlett <liam.howlett@oracle.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Acked-by: Todd Kjos <tkjos@google.com> Link: https://lore.kernel.org/r/20230519195950.1775656-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 1e8fed8 ("powerpc: drop ranges for definition of ARCH_FORCE_MAX_ORDER") removed the limits on the possible values for ARCH_FORCE_MAX_ORDER. However removing the ranges entirely causes some common work flows to break. For example building a defconfig (which uses 64K pages), changing the page size to 4K, and rebuilding used to work, because ARCH_FORCE_MAX_ORDER would be clamped to 12 by the ranges. With the ranges removed it creates a kernel that builds but crashes at boot: kernel BUG at mm/huge_memory.c:470! Oops: Exception in kernel mode, sig: 5 [#1] ... NIP hugepage_init+0x9c/0x278 LR do_one_initcall+0x80/0x320 Call Trace: do_one_initcall+0x80/0x320 kernel_init_freeable+0x304/0x3ac kernel_init+0x30/0x1a0 ret_from_kernel_user_thread+0x14/0x1c The reasoning for removing the ranges was that some of the values were too large. So take that into account and limit the maximums to 10 which is the default max, except for the 4K case which uses 12. Fixes: 1e8fed8 ("powerpc: drop ranges for definition of ARCH_FORCE_MAX_ORDER") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230519113806.370635-1-mpe@ellerman.id.au

In case user switch a device from switchdev mode to legacy mode, mlx5 first unpair the E-switch and afterwards unload the uplink vport. From the other hand, in case user remove or reload a device, mlx5 first unload the uplink vport and afterwards unpair the E-switch. The latter is causing a bug[1], hence, handle pairing of E-switch as part of uplink un/load APIs. [1] In case VF_LAG is used, every tc fdb flow is duplicated to the peer esw. However, the original esw keeps a pointer to this duplicated flow, not the peer esw. e.g.: if user create tc fdb flow over esw0, the flow is duplicated over esw1, in FW/HW, but in SW, esw0 keeps a pointer to the duplicated flow. During module unload while a peer tc fdb flow is still offloaded, in case the first device to be removed is the peer device (esw1 in the example above), the peer net-dev is destroyed, and so the mlx5e_priv is memset to 0. Afterwards, the peer device is trying to unpair himself from the original device (esw0 in the example above). Unpair API invoke the original device to clear peer flow from its eswitch (esw0), but the peer flow, which is stored over the original eswitch (esw0), is trying to use the peer mlx5e_priv, which is memset to 0 and result in bellow kernel-oops. [ 157.964081 ] BUG: unable to handle page fault for address: 000000000002ce60 [ 157.964662 ] #PF: supervisor read access in kernel mode [ 157.965123 ] #PF: error_code(0x0000) - not-present page [ 157.965582 ] PGD 0 P4D 0 [ 157.965866 ] Oops: 0000 [#1] SMP [ 157.967670 ] RIP: 0010:mlx5e_tc_del_fdb_flow+0x48/0x460 [mlx5_core] [ 157.976164 ] Call Trace: [ 157.976437 ] <TASK> [ 157.976690 ] __mlx5e_tc_del_fdb_peer_flow+0xe6/0x100 [mlx5_core] [ 157.977230 ] mlx5e_tc_clean_fdb_peer_flows+0x67/0x90 [mlx5_core] [ 157.977767 ] mlx5_esw_offloads_unpair+0x2d/0x1e0 [mlx5_core] [ 157.984653 ] mlx5_esw_offloads_devcom_event+0xbf/0x130 [mlx5_core] [ 157.985212 ] mlx5_devcom_send_event+0xa3/0xb0 [mlx5_core] [ 157.985714 ] esw_offloads_disable+0x5a/0x110 [mlx5_core] [ 157.986209 ] mlx5_eswitch_disable_locked+0x152/0x170 [mlx5_core] [ 157.986757 ] mlx5_eswitch_disable+0x51/0x80 [mlx5_core] [ 157.987248 ] mlx5_unload+0x2a/0xb0 [mlx5_core] [ 157.987678 ] mlx5_uninit_one+0x5f/0xd0 [mlx5_core] [ 157.988127 ] remove_one+0x64/0xe0 [mlx5_core] [ 157.988549 ] pci_device_remove+0x31/0xa0 [ 157.988933 ] device_release_driver_internal+0x18f/0x1f0 [ 157.989402 ] driver_detach+0x3f/0x80 [ 157.989754 ] bus_remove_driver+0x70/0xf0 [ 157.990129 ] pci_unregister_driver+0x34/0x90 [ 157.990537 ] mlx5_cleanup+0xc/0x1c [mlx5_core] [ 157.990972 ] __x64_sys_delete_module+0x15a/0x250 [ 157.991398 ] ? exit_to_user_mode_prepare+0xea/0x110 [ 157.991840 ] do_syscall_64+0x3d/0x90 [ 157.992198 ] entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: 04de7dd ("net/mlx5e: Infrastructure for duplicated offloading of TC flows") Fixes: 1418ddd ("net/mlx5e: Duplicate offloaded TC eswitch rules under uplink LAG") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Cited commit causes ABBA deadlock[0] when peer flows are created while holding the devcom rw semaphore. Due to peer flows offload implementation the lock is taken much higher up the call chain and there is no obvious way to easily fix the deadlock. Instead, since tc route query code needs the peer eswitch structure only to perform a lookup in xarray and doesn't perform any sleeping operations with it, refactor the code for lockless execution in following ways: - RCUify the devcom 'data' pointer. When resetting the pointer synchronously wait for RCU grace period before returning. This is fine since devcom is currently only used for synchronization of pairing/unpairing of eswitches which is rare and already expensive as-is. - Wrap all usages of 'paired' boolean in {READ|WRITE}_ONCE(). The flag has already been used in some unlocked contexts without proper annotations (e.g. users of mlx5_devcom_is_paired() function), but it wasn't an issue since all relevant code paths checked it again after obtaining the devcom semaphore. Now it is also used by mlx5_devcom_get_peer_data_rcu() as "best effort" check to return NULL when devcom is being unpaired. Note that while RCU read lock doesn't prevent the unpaired flag from being changed concurrently it still guarantees that reader can continue to use 'data'. - Refactor mlx5e_tc_query_route_vport() function to use new mlx5_devcom_get_peer_data_rcu() API which fixes the deadlock. [0]: [ 164.599612] ====================================================== [ 164.600142] WARNING: possible circular locking dependency detected [ 164.600667] 6.3.0-rc3+ #1 Not tainted [ 164.601021] ------------------------------------------------------ [ 164.601557] handler1/3456 is trying to acquire lock: [ 164.601998] ffff88811f1714b0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}, at: mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.603078] but task is already holding lock: [ 164.603617] ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.604459] which lock already depends on the new lock. [ 164.605190] the existing dependency chain (in reverse order) is: [ 164.605848] -> #1 (&comp->sem){++++}-{3:3}: [ 164.606380] down_read+0x39/0x50 [ 164.606772] mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.607336] mlx5e_tc_query_route_vport+0x86/0xc0 [mlx5_core] [ 164.607914] mlx5e_tc_tun_route_lookup+0x1a4/0x1d0 [mlx5_core] [ 164.608495] mlx5e_attach_decap_route+0xc6/0x1e0 [mlx5_core] [ 164.609063] mlx5e_tc_add_fdb_flow+0x1ea/0x360 [mlx5_core] [ 164.609627] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.610175] mlx5e_configure_flower+0x952/0x1a20 [mlx5_core] [ 164.610741] tc_setup_cb_add+0xd4/0x200 [ 164.611146] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.611661] fl_change+0xc95/0x18a0 [cls_flower] [ 164.612116] tc_new_tfilter+0x3fc/0xd20 [ 164.612516] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.612936] netlink_rcv_skb+0x54/0x100 [ 164.613339] netlink_unicast+0x190/0x250 [ 164.613746] netlink_sendmsg+0x245/0x4a0 [ 164.614150] sock_sendmsg+0x38/0x60 [ 164.614522] ____sys_sendmsg+0x1d0/0x1e0 [ 164.614934] ___sys_sendmsg+0x80/0xc0 [ 164.615320] __sys_sendmsg+0x51/0x90 [ 164.615701] do_syscall_64+0x3d/0x90 [ 164.616083] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.616568] -> #0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}: [ 164.617210] __lock_acquire+0x159e/0x26e0 [ 164.617638] lock_acquire+0xc2/0x2a0 [ 164.618018] __mutex_lock+0x92/0xcd0 [ 164.618401] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.618943] post_process_attr+0x153/0x2d0 [mlx5_core] [ 164.619471] mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core] [ 164.620021] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.620564] mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core] [ 164.621125] tc_setup_cb_add+0xd4/0x200 [ 164.621531] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.622047] fl_change+0xc95/0x18a0 [cls_flower] [ 164.622500] tc_new_tfilter+0x3fc/0xd20 [ 164.622906] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.623324] netlink_rcv_skb+0x54/0x100 [ 164.623727] netlink_unicast+0x190/0x250 [ 164.624138] netlink_sendmsg+0x245/0x4a0 [ 164.624544] sock_sendmsg+0x38/0x60 [ 164.624919] ____sys_sendmsg+0x1d0/0x1e0 [ 164.625340] ___sys_sendmsg+0x80/0xc0 [ 164.625731] __sys_sendmsg+0x51/0x90 [ 164.626117] do_syscall_64+0x3d/0x90 [ 164.626502] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.626995] other info that might help us debug this: [ 164.627725] Possible unsafe locking scenario: [ 164.628268] CPU0 CPU1 [ 164.628683] ---- ---- [ 164.629098] lock(&comp->sem); [ 164.629421] lock(&esw->offloads.encap_tbl_lock); [ 164.630066] lock(&comp->sem); [ 164.630555] lock(&esw->offloads.encap_tbl_lock); [ 164.630993] *** DEADLOCK *** [ 164.631575] 3 locks held by handler1/3456: [ 164.631962] #0: ffff888124b75130 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200 [ 164.632703] #1: ffff888116e512b8 (&esw->mode_lock){++++}-{3:3}, at: mlx5_esw_hold+0x39/0x50 [mlx5_core] [ 164.633552] #2: ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.634435] stack backtrace: [ 164.634883] CPU: 17 PID: 3456 Comm: handler1 Not tainted 6.3.0-rc3+ #1 [ 164.635431] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 164.636340] Call Trace: [ 164.636616] <TASK> [ 164.636863] dump_stack_lvl+0x47/0x70 [ 164.637217] check_noncircular+0xfe/0x110 [ 164.637601] __lock_acquire+0x159e/0x26e0 [ 164.637977] ? mlx5_cmd_set_fte+0x5b0/0x830 [mlx5_core] [ 164.638472] lock_acquire+0xc2/0x2a0 [ 164.638828] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.639339] ? lock_is_held_type+0x98/0x110 [ 164.639728] __mutex_lock+0x92/0xcd0 [ 164.640074] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.640576] ? __lock_acquire+0x382/0x26e0 [ 164.640958] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.641468] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.641965] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.642454] ? lock_release+0xbf/0x240 [ 164.642819] post_process_attr+0x153/0x2d0 [mlx5_core] [ 164.643318] mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core] [ 164.643835] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.644340] mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core] [ 164.644862] ? lock_acquire+0xc2/0x2a0 [ 164.645219] tc_setup_cb_add+0xd4/0x200 [ 164.645588] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.646067] fl_change+0xc95/0x18a0 [cls_flower] [ 164.646488] tc_new_tfilter+0x3fc/0xd20 [ 164.646861] ? tc_del_tfilter+0x810/0x810 [ 164.647236] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.647621] ? rtnl_setlink+0x160/0x160 [ 164.647982] netlink_rcv_skb+0x54/0x100 [ 164.648348] netlink_unicast+0x190/0x250 [ 164.648722] netlink_sendmsg+0x245/0x4a0 [ 164.649090] sock_sendmsg+0x38/0x60 [ 164.649434] ____sys_sendmsg+0x1d0/0x1e0 [ 164.649804] ? copy_msghdr_from_user+0x6d/0xa0 [ 164.650213] ___sys_sendmsg+0x80/0xc0 [ 164.650563] ? lock_acquire+0xc2/0x2a0 [ 164.650926] ? lock_acquire+0xc2/0x2a0 [ 164.651286] ? __fget_files+0x5/0x190 [ 164.651644] ? find_held_lock+0x2b/0x80 [ 164.652006] ? __fget_files+0xb9/0x190 [ 164.652365] ? lock_release+0xbf/0x240 [ 164.652723] ? __fget_files+0xd3/0x190 [ 164.653079] __sys_sendmsg+0x51/0x90 [ 164.653435] do_syscall_64+0x3d/0x90 [ 164.653784] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.654229] RIP: 0033:0x7f378054f8bd [ 164.654577] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 6a c3 f4 ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 be c3 f4 ff 48 [ 164.656041] RSP: 002b:00007f377fa114b0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 164.656701] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f378054f8bd [ 164.657297] RDX: 0000000000000000 RSI: 00007f377fa11540 RDI: 0000000000000014 [ 164.657885] RBP: 00007f377fa12278 R08: 0000000000000000 R09: 000000000000015c [ 164.658472] R10: 00007f377fa123d0 R11: 0000000000000293 R12: 0000560962d99bd0 [ 164.665317] R13: 0000000000000000 R14: 0000560962d99bd0 R15: 00007f377fa11540 Fixes: f9d196b ("net/mlx5e: Use correct eswitch for stack devices with lag") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Cited patch is using the eswitch object mapping pool while in nic mode where it isn't initialized. This results in the trace below [0]. Fix that by using either nic or eswitch object mapping pool depending if eswitch is enabled or not. [0]: [ 826.446057] ================================================================== [ 826.446729] BUG: KASAN: slab-use-after-free in mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.447515] Read of size 8 at addr ffff888194485830 by task tc/6233 [ 826.448243] CPU: 16 PID: 6233 Comm: tc Tainted: G W 6.3.0-rc6+ #1 [ 826.448890] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 826.449785] Call Trace: [ 826.450052] <TASK> [ 826.450302] dump_stack_lvl+0x33/0x50 [ 826.450650] print_report+0xc2/0x610 [ 826.450998] ? __virt_addr_valid+0xb1/0x130 [ 826.451385] ? mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.451935] kasan_report+0xae/0xe0 [ 826.452276] ? mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.452829] mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.453368] ? __kmalloc_node+0x5a/0x120 [ 826.453733] esw_add_restore_rule+0x20f/0x270 [mlx5_core] [ 826.454288] ? mlx5_eswitch_add_send_to_vport_meta_rule+0x260/0x260 [mlx5_core] [ 826.455011] ? mutex_unlock+0x80/0xd0 [ 826.455361] ? __mutex_unlock_slowpath.constprop.0+0x210/0x210 [ 826.455862] ? mapping_add+0x2cb/0x440 [mlx5_core] [ 826.456425] mlx5e_tc_action_miss_mapping_get+0x139/0x180 [mlx5_core] [ 826.457058] ? mlx5e_tc_update_skb_nic+0xb0/0xb0 [mlx5_core] [ 826.457636] ? __kasan_kmalloc+0x77/0x90 [ 826.458000] ? __kmalloc+0x57/0x120 [ 826.458336] mlx5_tc_ct_flow_offload+0x325/0xe40 [mlx5_core] [ 826.458916] ? ct_kernel_enter.constprop.0+0x48/0xa0 [ 826.459360] ? mlx5_tc_ct_parse_action+0xf0/0xf0 [mlx5_core] [ 826.459933] ? mlx5e_mod_hdr_attach+0x491/0x520 [mlx5_core] [ 826.460507] ? mlx5e_mod_hdr_get+0x12/0x20 [mlx5_core] [ 826.461046] ? mlx5e_tc_attach_mod_hdr+0x154/0x170 [mlx5_core] [ 826.461635] mlx5e_configure_flower+0x969/0x2110 [mlx5_core] [ 826.462217] ? _raw_spin_lock_bh+0x85/0xe0 [ 826.462597] ? __mlx5e_add_fdb_flow+0x750/0x750 [mlx5_core] [ 826.463163] ? kasan_save_stack+0x2e/0x40 [ 826.463534] ? down_read+0x115/0x1b0 [ 826.463878] ? down_write_killable+0x110/0x110 [ 826.464288] ? tc_setup_action.part.0+0x9f/0x3b0 [ 826.464701] ? mlx5e_is_uplink_rep+0x4c/0x90 [mlx5_core] [ 826.465253] ? mlx5e_tc_reoffload_flows_work+0x130/0x130 [mlx5_core] [ 826.465878] tc_setup_cb_add+0x112/0x250 [ 826.466247] fl_hw_replace_filter+0x230/0x310 [cls_flower] [ 826.466724] ? fl_hw_destroy_filter+0x1a0/0x1a0 [cls_flower] [ 826.467212] fl_change+0x14e1/0x2030 [cls_flower] [ 826.467636] ? sock_def_readable+0x89/0x120 [ 826.468019] ? fl_tmplt_create+0x2d0/0x2d0 [cls_flower] [ 826.468509] ? kasan_unpoison+0x23/0x50 [ 826.468873] ? get_random_u16+0x180/0x180 [ 826.469244] ? __radix_tree_lookup+0x2b/0x130 [ 826.469640] ? fl_get+0x7b/0x140 [cls_flower] [ 826.470042] ? fl_mask_put+0x200/0x200 [cls_flower] [ 826.470478] ? __mutex_unlock_slowpath.constprop.0+0x210/0x210 [ 826.470973] ? fl_tmplt_create+0x2d0/0x2d0 [cls_flower] [ 826.471427] tc_new_tfilter+0x644/0x1050 [ 826.471795] ? tc_get_tfilter+0x860/0x860 [ 826.472170] ? __thaw_task+0x130/0x130 [ 826.472525] ? arch_stack_walk+0x98/0xf0 [ 826.472892] ? cap_capable+0x9f/0xd0 [ 826.473235] ? security_capable+0x47/0x60 [ 826.473608] rtnetlink_rcv_msg+0x1d5/0x550 [ 826.473985] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 826.474383] ? __stack_depot_save+0x35/0x4c0 [ 826.474779] ? kasan_save_stack+0x2e/0x40 [ 826.475149] ? kasan_save_stack+0x1e/0x40 [ 826.475518] ? __kasan_record_aux_stack+0x9f/0xb0 [ 826.475939] ? task_work_add+0x77/0x1c0 [ 826.476305] netlink_rcv_skb+0xe0/0x210 [ 826.476661] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 826.477057] ? netlink_ack+0x7c0/0x7c0 [ 826.477412] ? rhashtable_jhash2+0xef/0x150 [ 826.477796] ? _copy_from_iter+0x105/0x770 [ 826.484386] netlink_unicast+0x346/0x490 [ 826.484755] ? netlink_attachskb+0x400/0x400 [ 826.485145] ? kernel_text_address+0xc2/0xd0 [ 826.485535] netlink_sendmsg+0x3b0/0x6c0 [ 826.485902] ? kernel_text_address+0xc2/0xd0 [ 826.486296] ? netlink_unicast+0x490/0x490 [ 826.486671] ? iovec_from_user.part.0+0x7a/0x1a0 [ 826.487083] ? netlink_unicast+0x490/0x490 [ 826.487461] sock_sendmsg+0x73/0xc0 [ 826.487803] ____sys_sendmsg+0x364/0x380 [ 826.488186] ? import_iovec+0x7/0x10 [ 826.488531] ? kernel_sendmsg+0x30/0x30 [ 826.488893] ? __copy_msghdr+0x180/0x180 [ 826.489258] ? kasan_save_stack+0x2e/0x40 [ 826.489629] ? kasan_save_stack+0x1e/0x40 [ 826.490002] ? __kasan_record_aux_stack+0x9f/0xb0 [ 826.490424] ? __call_rcu_common.constprop.0+0x46/0x580 [ 826.490876] ___sys_sendmsg+0xdf/0x140 [ 826.491231] ? copy_msghdr_from_user+0x110/0x110 [ 826.491649] ? fget_raw+0x120/0x120 [ 826.491988] ? ___sys_recvmsg+0xd9/0x130 [ 826.492355] ? folio_batch_add_and_move+0x80/0xa0 [ 826.492776] ? _raw_spin_lock+0x7a/0xd0 [ 826.493137] ? _raw_spin_lock+0x7a/0xd0 [ 826.493500] ? _raw_read_lock_irq+0x30/0x30 [ 826.493880] ? kasan_set_track+0x21/0x30 [ 826.494249] ? kasan_save_free_info+0x2a/0x40 [ 826.494650] ? do_sys_openat2+0xff/0x270 [ 826.495016] ? __fget_light+0x1b5/0x200 [ 826.495377] ? __virt_addr_valid+0xb1/0x130 [ 826.495763] __sys_sendmsg+0xb2/0x130 [ 826.496118] ? __sys_sendmsg_sock+0x20/0x20 [ 826.496501] ? __x64_sys_rseq+0x2e0/0x2e0 [ 826.496874] ? do_user_addr_fault+0x276/0x820 [ 826.497273] ? fpregs_assert_state_consistent+0x52/0x60 [ 826.497727] ? exit_to_user_mode_prepare+0x30/0x120 [ 826.498158] do_syscall_64+0x3d/0x90 [ 826.498502] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.498949] RIP: 0033:0x7f9b67f4f887 [ 826.499294] Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 826.500742] RSP: 002b:00007fff5d1a5498 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 826.501395] RAX: ffffffffffffffda RBX: 0000000064413ce6 RCX: 00007f9b67f4f887 [ 826.501975] RDX: 0000000000000000 RSI: 00007fff5d1a5500 RDI: 0000000000000003 [ 826.502556] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 [ 826.503135] R10: 00007f9b67e08708 R11: 0000000000000246 R12: 0000000000000001 [ 826.503714] R13: 0000000000000001 R14: 00007fff5d1a9800 R15: 0000000000485400 [ 826.504304] </TASK> [ 826.504753] Allocated by task 3764: [ 826.505090] kasan_save_stack+0x1e/0x40 [ 826.505453] kasan_set_track+0x21/0x30 [ 826.505810] __kasan_kmalloc+0x77/0x90 [ 826.506164] __mlx5_create_flow_table+0x16d/0xbb0 [mlx5_core] [ 826.506742] esw_offloads_enable+0x60d/0xfb0 [mlx5_core] [ 826.507292] mlx5_eswitch_enable_locked+0x4d3/0x680 [mlx5_core] [ 826.507885] mlx5_devlink_eswitch_mode_set+0x2a3/0x580 [mlx5_core] [ 826.508513] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0 [ 826.508969] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0 [ 826.509427] genl_rcv_msg+0x28d/0x3e0 [ 826.509772] netlink_rcv_skb+0xe0/0x210 [ 826.510133] genl_rcv+0x24/0x40 [ 826.510448] netlink_unicast+0x346/0x490 [ 826.510810] netlink_sendmsg+0x3b0/0x6c0 [ 826.511179] sock_sendmsg+0x73/0xc0 [ 826.511519] __sys_sendto+0x18d/0x220 [ 826.511867] __x64_sys_sendto+0x72/0x80 [ 826.512232] do_syscall_64+0x3d/0x90 [ 826.512576] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.513220] Freed by task 5674: [ 826.513535] kasan_save_stack+0x1e/0x40 [ 826.513893] kasan_set_track+0x21/0x30 [ 826.514245] kasan_save_free_info+0x2a/0x40 [ 826.514629] ____kasan_slab_free+0x11a/0x1b0 [ 826.515021] __kmem_cache_free+0x14d/0x280 [ 826.515399] tree_put_node+0x109/0x1c0 [mlx5_core] [ 826.515907] mlx5_destroy_flow_table+0x119/0x630 [mlx5_core] [ 826.516481] esw_offloads_steering_cleanup+0xe7/0x150 [mlx5_core] [ 826.517084] esw_offloads_disable+0xe0/0x160 [mlx5_core] [ 826.517632] mlx5_eswitch_disable_locked+0x26c/0x290 [mlx5_core] [ 826.518225] mlx5_devlink_eswitch_mode_set+0x128/0x580 [mlx5_core] [ 826.518834] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0 [ 826.519286] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0 [ 826.519748] genl_rcv_msg+0x28d/0x3e0 [ 826.520101] netlink_rcv_skb+0xe0/0x210 [ 826.520458] genl_rcv+0x24/0x40 [ 826.520771] netlink_unicast+0x346/0x490 [ 826.521137] netlink_sendmsg+0x3b0/0x6c0 [ 826.521505] sock_sendmsg+0x73/0xc0 [ 826.521842] __sys_sendto+0x18d/0x220 [ 826.522191] __x64_sys_sendto+0x72/0x80 [ 826.522554] do_syscall_64+0x3d/0x90 [ 826.522894] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.523540] Last potentially related work creation: [ 826.523969] kasan_save_stack+0x1e/0x40 [ 826.524331] __kasan_record_aux_stack+0x9f/0xb0 [ 826.524739] insert_work+0x30/0x130 [ 826.525078] __queue_work+0x34b/0x690 [ 826.525426] queue_work_on+0x48/0x50 [ 826.525766] __rhashtable_remove_fast_one+0x4af/0x4d0 [mlx5_core] [ 826.526365] del_sw_flow_group+0x1b5/0x270 [mlx5_core] [ 826.526898] tree_put_node+0x109/0x1c0 [mlx5_core] [ 826.527407] esw_offloads_steering_cleanup+0xd3/0x150 [mlx5_core] [ 826.528009] esw_offloads_disable+0xe0/0x160 [mlx5_core] [ 826.528616] mlx5_eswitch_disable_locked+0x26c/0x290 [mlx5_core] [ 826.529218] mlx5_devlink_eswitch_mode_set+0x128/0x580 [mlx5_core] [ 826.529823] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0 [ 826.530276] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0 [ 826.530733] genl_rcv_msg+0x28d/0x3e0 [ 826.531079] netlink_rcv_skb+0xe0/0x210 [ 826.531439] genl_rcv+0x24/0x40 [ 826.531755] netlink_unicast+0x346/0x490 [ 826.532123] netlink_sendmsg+0x3b0/0x6c0 [ 826.532487] sock_sendmsg+0x73/0xc0 [ 826.532825] __sys_sendto+0x18d/0x220 [ 826.533175] __x64_sys_sendto+0x72/0x80 [ 826.533533] do_syscall_64+0x3d/0x90 [ 826.533877] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.534521] The buggy address belongs to the object at ffff888194485800 which belongs to the cache kmalloc-512 of size 512 [ 826.535506] The buggy address is located 48 bytes inside of freed 512-byte region [ffff888194485800, ffff888194485a00) [ 826.536666] The buggy address belongs to the physical page: [ 826.537138] page:00000000d75841dd refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x194480 [ 826.537915] head:00000000d75841dd order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 826.538595] flags: 0x200000000010200(slab|head|node=0|zone=2) [ 826.539089] raw: 0200000000010200 ffff888100042c80 ffffea0004523800 dead000000000002 [ 826.539755] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 [ 826.540417] page dumped because: kasan: bad access detected [ 826.541095] Memory state around the buggy address: [ 826.541519] ffff888194485700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 826.542149] ffff888194485780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 826.542773] >ffff888194485800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 826.543400] ^ [ 826.543822] ffff888194485880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 826.544452] ffff888194485900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 826.545079] ================================================================== Fixes: 6702782 ("net/mlx5e: TC, Set CT miss to the specific ct action instance") Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Whenever a shutdown is invoked, free irqs only and keep mlx5_irq synthetic wrapper intact in order to avoid use-after-free on system shutdown. for example: ================================================================== BUG: KASAN: use-after-free in _find_first_bit+0x66/0x80 Read of size 8 at addr ffff88823fc0d318 by task kworker/u192:0/13608 CPU: 25 PID: 13608 Comm: kworker/u192:0 Tainted: G B W O 6.1.21-cloudflare-kasan-2023.3.21 #1 Hardware name: GIGABYTE R162-R2-GEN0/MZ12-HD2-CD, BIOS R14 05/03/2021 Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x34/0x48 print_report+0x170/0x473 ? _find_first_bit+0x66/0x80 kasan_report+0xad/0x130 ? _find_first_bit+0x66/0x80 _find_first_bit+0x66/0x80 mlx5e_open_channels+0x3c5/0x3a10 [mlx5_core] ? console_unlock+0x2fa/0x430 ? _raw_spin_lock_irqsave+0x8d/0xf0 ? _raw_spin_unlock_irqrestore+0x42/0x80 ? preempt_count_add+0x7d/0x150 ? __wake_up_klogd.part.0+0x7d/0xc0 ? vprintk_emit+0xfe/0x2c0 ? mlx5e_trigger_napi_sched+0x40/0x40 [mlx5_core] ? dev_attr_show.cold+0x35/0x35 ? devlink_health_do_dump.part.0+0x174/0x340 ? devlink_health_report+0x504/0x810 ? mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core] ? mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core] ? process_one_work+0x680/0x1050 mlx5e_safe_switch_params+0x156/0x220 [mlx5_core] ? mlx5e_switch_priv_channels+0x310/0x310 [mlx5_core] ? mlx5_eq_poll_irq_disabled+0xb6/0x100 [mlx5_core] mlx5e_tx_reporter_timeout_recover+0x123/0x240 [mlx5_core] ? __mutex_unlock_slowpath.constprop.0+0x2b0/0x2b0 devlink_health_reporter_recover+0xa6/0x1f0 devlink_health_report+0x2f7/0x810 ? vsnprintf+0x854/0x15e0 mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core] ? mlx5e_reporter_tx_err_cqe+0x1a0/0x1a0 [mlx5_core] ? mlx5e_tx_reporter_timeout_dump+0x50/0x50 [mlx5_core] ? mlx5e_tx_reporter_dump_sq+0x260/0x260 [mlx5_core] ? newidle_balance+0x9b7/0xe30 ? psi_group_change+0x6a7/0xb80 ? mutex_lock+0x96/0xf0 ? __mutex_lock_slowpath+0x10/0x10 mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core] process_one_work+0x680/0x1050 worker_thread+0x5a0/0xeb0 ? process_one_work+0x1050/0x1050 kthread+0x2a2/0x340 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> Freed by task 1: kasan_save_stack+0x23/0x50 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x169/0x1d0 slab_free_freelist_hook+0xd2/0x190 __kmem_cache_free+0x1a1/0x2f0 irq_pool_free+0x138/0x200 [mlx5_core] mlx5_irq_table_destroy+0xf6/0x170 [mlx5_core] mlx5_core_eq_free_irqs+0x74/0xf0 [mlx5_core] shutdown+0x194/0x1aa [mlx5_core] pci_device_shutdown+0x75/0x120 device_shutdown+0x35c/0x620 kernel_restart+0x60/0xa0 __do_sys_reboot+0x1cb/0x2c0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x4b/0xb5 The buggy address belongs to the object at ffff88823fc0d300 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 24 bytes inside of 192-byte region [ffff88823fc0d300, ffff88823fc0d3c0) The buggy address belongs to the physical page: page:0000000010139587 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x23fc0c head:0000000010139587 order:1 compound_mapcount:0 compound_pincount:0 flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff) raw: 002ffff800010200 0000000000000000 dead000000000122 ffff88810004ca00 raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88823fc0d200: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88823fc0d280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc >ffff88823fc0d300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88823fc0d380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff88823fc0d400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== general protection fault, probably for non-canonical address 0xdffffc005c40d7ac: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: probably user-memory-access in range [0x00000002e206bd60-0x00000002e206bd67] CPU: 25 PID: 13608 Comm: kworker/u192:0 Tainted: G B W O 6.1.21-cloudflare-kasan-2023.3.21 #1 Hardware name: GIGABYTE R162-R2-GEN0/MZ12-HD2-CD, BIOS R14 05/03/2021 Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core] RIP: 0010:__alloc_pages+0x141/0x5c0 Call Trace: <TASK> ? sysvec_apic_timer_interrupt+0xa0/0xc0 ? asm_sysvec_apic_timer_interrupt+0x16/0x20 ? __alloc_pages_slowpath.constprop.0+0x1ec0/0x1ec0 ? _raw_spin_unlock_irqrestore+0x3d/0x80 __kmalloc_large_node+0x80/0x120 ? kvmalloc_node+0x4e/0x170 __kmalloc_node+0xd4/0x150 kvmalloc_node+0x4e/0x170 mlx5e_open_channels+0x631/0x3a10 [mlx5_core] ? console_unlock+0x2fa/0x430 ? _raw_spin_lock_irqsave+0x8d/0xf0 ? _raw_spin_unlock_irqrestore+0x42/0x80 ? preempt_count_add+0x7d/0x150 ? __wake_up_klogd.part.0+0x7d/0xc0 ? vprintk_emit+0xfe/0x2c0 ? mlx5e_trigger_napi_sched+0x40/0x40 [mlx5_core] ? dev_attr_show.cold+0x35/0x35 ? devlink_health_do_dump.part.0+0x174/0x340 ? devlink_health_report+0x504/0x810 ? mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core] ? mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core] ? process_one_work+0x680/0x1050 mlx5e_safe_switch_params+0x156/0x220 [mlx5_core] ? mlx5e_switch_priv_channels+0x310/0x310 [mlx5_core] ? mlx5_eq_poll_irq_disabled+0xb6/0x100 [mlx5_core] mlx5e_tx_reporter_timeout_recover+0x123/0x240 [mlx5_core] ? __mutex_unlock_slowpath.constprop.0+0x2b0/0x2b0 devlink_health_reporter_recover+0xa6/0x1f0 devlink_health_report+0x2f7/0x810 ? vsnprintf+0x854/0x15e0 mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core] ? mlx5e_reporter_tx_err_cqe+0x1a0/0x1a0 [mlx5_core] ? mlx5e_tx_reporter_timeout_dump+0x50/0x50 [mlx5_core] ? mlx5e_tx_reporter_dump_sq+0x260/0x260 [mlx5_core] ? newidle_balance+0x9b7/0xe30 ? psi_group_change+0x6a7/0xb80 ? mutex_lock+0x96/0xf0 ? __mutex_lock_slowpath+0x10/0x10 mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core] process_one_work+0x680/0x1050 worker_thread+0x5a0/0xeb0 ? process_one_work+0x1050/0x1050 kthread+0x2a2/0x340 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> ---[ end trace 0000000000000000 ]--- RIP: 0010:__alloc_pages+0x141/0x5c0 Code: e0 39 a3 96 89 e9 b8 22 01 32 01 83 e1 0f 48 89 fa 01 c9 48 c1 ea 03 d3 f8 83 e0 03 89 44 24 6c 48 b8 00 00 00 00 00 fc ff df <80> 3c 02 00 0f 85 fc 03 00 00 89 e8 4a 8b 14 f5 e0 39 a3 96 4c 89 RSP: 0018:ffff888251f0f438 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 1ffff1104a3e1e8b RCX: 0000000000000000 RDX: 000000005c40d7ac RSI: 0000000000000003 RDI: 00000002e206bd60 RBP: 0000000000052dc0 R08: ffff8882b0044218 R09: ffff8882b0045e8a R10: fffffbfff300fefc R11: ffff888167af4000 R12: 0000000000000003 R13: 0000000000000000 R14: 00000000696c7070 R15: ffff8882373f4380 FS: 0000000000000000(0000) GS:ffff88bf2be80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005641d031eee8 CR3: 0000002e7ca14000 CR4: 0000000000350ee0 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x11000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]---] Reported-by: Frederick Lawler <fred@cloudflare.com> Link: https://lore.kernel.org/netdev/be5b9271-7507-19c5-ded1-fa78f1980e69@cloudflare.com Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The read_skb hook calls consume_skb() now, but this means that if the recv_actor program wants to use the skb it needs to inc the ref cnt so that the consume_skb() doesn't kfree the sk_buff. This is problematic because in some error cases under memory pressure we may need to linearize the sk_buff from sk_psock_skb_ingress_enqueue(). Then we get this, skb_linearize() __pskb_pull_tail() pskb_expand_head() BUG_ON(skb_shared(skb)) Because we incremented users refcnt from sk_psock_verdict_recv() we hit the bug on with refcnt > 1 and trip it. To fix lets simply pass ownership of the sk_buff through the skb_read call. Then we can drop the consume from read_skb handlers and assume the verdict recv does any required kfree. Bug found while testing in our CI which runs in VMs that hit memory constraints rather regularly. William tested TCP read_skb handlers. [ 106.536188] ------------[ cut here ]------------ [ 106.536197] kernel BUG at net/core/skbuff.c:1693! [ 106.536479] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 106.536726] CPU: 3 PID: 1495 Comm: curl Not tainted 5.19.0-rc5 #1 [ 106.537023] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.16.0-1 04/01/2014 [ 106.537467] RIP: 0010:pskb_expand_head+0x269/0x330 [ 106.538585] RSP: 0018:ffffc90000138b68 EFLAGS: 00010202 [ 106.538839] RAX: 000000000000003f RBX: ffff8881048940e8 RCX: 0000000000000a20 [ 106.539186] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff8881048940e8 [ 106.539529] RBP: ffffc90000138be8 R08: 00000000e161fd1a R09: 0000000000000000 [ 106.539877] R10: 0000000000000018 R11: 0000000000000000 R12: ffff8881048940e8 [ 106.540222] R13: 0000000000000003 R14: 0000000000000000 R15: ffff8881048940e8 [ 106.540568] FS: 00007f277dde9f00(0000) GS:ffff88813bd80000(0000) knlGS:0000000000000000 [ 106.540954] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 106.541227] CR2: 00007f277eeede64 CR3: 000000000ad3e000 CR4: 00000000000006e0 [ 106.541569] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 106.541915] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 106.542255] Call Trace: [ 106.542383] <IRQ> [ 106.542487] __pskb_pull_tail+0x4b/0x3e0 [ 106.542681] skb_ensure_writable+0x85/0xa0 [ 106.542882] sk_skb_pull_data+0x18/0x20 [ 106.543084] bpf_prog_b517a65a242018b0_bpf_skskb_http_verdict+0x3a9/0x4aa9 [ 106.543536] ? migrate_disable+0x66/0x80 [ 106.543871] sk_psock_verdict_recv+0xe2/0x310 [ 106.544258] ? sk_psock_write_space+0x1f0/0x1f0 [ 106.544561] tcp_read_skb+0x7b/0x120 [ 106.544740] tcp_data_queue+0x904/0xee0 [ 106.544931] tcp_rcv_established+0x212/0x7c0 [ 106.545142] tcp_v4_do_rcv+0x174/0x2a0 [ 106.545326] tcp_v4_rcv+0xe70/0xf60 [ 106.545500] ip_protocol_deliver_rcu+0x48/0x290 [ 106.545744] ip_local_deliver_finish+0xa7/0x150 Fixes: 04919be ("tcp: Introduce tcp_read_skb()") Reported-by: William Findlay <will@isovalent.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: William Findlay <will@isovalent.com> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20230523025618.113937-2-john.fastabend@gmail.com

When using DMA mode we are facing with Oops: [ 396.458157] Unable to handle kernel access to user memory without uaccess routines at virtual address 000000000000000c [ 396.469374] Oops [#1] [ 396.471839] Modules linked in: [ 396.475144] CPU: 0 PID: 114 Comm: arecord Not tainted 6.0.0-00164-g9a8eccdaf2be-dirty #68 [ 396.483619] Hardware name: YMP ELCT FPGA (DT) [ 396.488156] epc : dmaengine_pcm_open+0x1d2/0x342 [ 396.493227] ra : dmaengine_pcm_open+0x1d2/0x342 [ 396.498140] epc : ffffffff807fe346 ra : ffffffff807fe346 sp : ffffffc804e138f0 [ 396.505602] gp : ffffffff817bf730 tp : ffffffd8042c8ac0 t0 : 6500000000000000 [ 396.513045] t1 : 0000000000000064 t2 : 656e69676e65616d s0 : ffffffc804e13990 [ 396.520477] s1 : ffffffd801b86a18 a0 : 0000000000000026 a1 : ffffffff816920f8 [ 396.527897] a2 : 0000000000000010 a3 : fffffffffffffffe a4 : 0000000000000000 [ 396.535319] a5 : 0000000000000000 a6 : ffffffd801b87040 a7 : 0000000000000038 [ 396.542740] s2 : ffffffd801b94a00 s3 : 0000000000000000 s4 : ffffffd80427f5e8 [ 396.550153] s5 : ffffffd80427f5e8 s6 : ffffffd801b44410 s7 : fffffffffffffff5 [ 396.557569] s8 : 0000000000000800 s9 : 0000000000000001 s10: ffffffff8066d254 [ 396.564978] s11: ffffffd8059cf768 t3 : ffffffff817d5577 t4 : ffffffff817d5577 [ 396.572391] t5 : ffffffff817d5578 t6 : ffffffc804e136e8 [ 396.577876] status: 0000000200000120 badaddr: 000000000000000c cause: 000000000000000d [ 396.586007] [<ffffffff806839f4>] snd_soc_component_open+0x1a/0x68 [ 396.592439] [<ffffffff807fdd62>] __soc_pcm_open+0xf0/0x502 [ 396.598217] [<ffffffff80685d86>] soc_pcm_open+0x2e/0x4e [ 396.603741] [<ffffffff8066cea4>] snd_pcm_open_substream+0x442/0x68e [ 396.610313] [<ffffffff8066d1ea>] snd_pcm_open+0xfa/0x212 [ 396.615868] [<ffffffff8066d39c>] snd_pcm_capture_open+0x3a/0x60 [ 396.622048] [<ffffffff8065b35a>] snd_open+0xa8/0x17a [ 396.627421] [<ffffffff801ae036>] chrdev_open+0xa0/0x218 [ 396.632893] [<ffffffff801a5a28>] do_dentry_open+0x17c/0x2a6 [ 396.638713] [<ffffffff801a6d9a>] vfs_open+0x1e/0x26 [ 396.643850] [<ffffffff801b8544>] path_openat+0x96e/0xc96 [ 396.649518] [<ffffffff801b9390>] do_filp_open+0x7c/0xf6 [ 396.655034] [<ffffffff801a6ff2>] do_sys_openat2+0x8a/0x11e [ 396.660765] [<ffffffff801a735a>] sys_openat+0x50/0x7c [ 396.666068] [<ffffffff80003aca>] ret_from_syscall+0x0/0x2 [ 396.674964] ---[ end trace 0000000000000000 ]--- It happens because of play_dma_data/capture_dma_data pointers are NULL. Current implementation assigns these pointers at snd_soc_dai_driver startup() callback and reset them back to NULL at shutdown(). But soc_pcm_open() sequence uses DMA pointers in dmaengine_pcm_open() before snd_soc_dai_driver startup(). Most generic DMA capable I2S drivers use snd_soc_dai_driver probe() callback to init DMA pointers only once at probe. So move DMA init to dw_i2s_dai_probe and drop shutdown() and startup() callbacks. Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Link: https://lore.kernel.org/r/20230512110343.66664-1-fido_max@inbox.ru Signed-off-by: Mark Brown <broonie@kernel.org>

The cited commit adds a compeletion to remove dependency on rtnl lock. But it causes a deadlock for multiple encapsulations: crash> bt ffff8aece8a64000 PID: 1514557 TASK: ffff8aece8a64000 CPU: 3 COMMAND: "tc" #0 [ffffa6d14183f368] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14183f3f8] schedule at ffffffffb8ba8418 #2 [ffffa6d14183f418] schedule_preempt_disabled at ffffffffb8ba8898 #3 [ffffa6d14183f428] __mutex_lock at ffffffffb8baa7f8 #4 [ffffa6d14183f4d0] mutex_lock_nested at ffffffffb8baabeb #5 [ffffa6d14183f4e0] mlx5e_attach_encap at ffffffffc0f48c17 [mlx5_core] #6 [ffffa6d14183f628] mlx5e_tc_add_fdb_flow at ffffffffc0f39680 [mlx5_core] #7 [ffffa6d14183f688] __mlx5e_add_fdb_flow at ffffffffc0f3b636 [mlx5_core] #8 [ffffa6d14183f6f0] mlx5e_tc_add_flow at ffffffffc0f3bcdf [mlx5_core] #9 [ffffa6d14183f728] mlx5e_configure_flower at ffffffffc0f3c1d1 [mlx5_core] #10 [ffffa6d14183f790] mlx5e_rep_setup_tc_cls_flower at ffffffffc0f3d529 [mlx5_core] #11 [ffffa6d14183f7a0] mlx5e_rep_setup_tc_cb at ffffffffc0f3d714 [mlx5_core] #12 [ffffa6d14183f7b0] tc_setup_cb_add at ffffffffb8931bb8 #13 [ffffa6d14183f810] fl_hw_replace_filter at ffffffffc0dae901 [cls_flower] #14 [ffffa6d14183f8d8] fl_change at ffffffffc0db5c57 [cls_flower] #15 [ffffa6d14183f970] tc_new_tfilter at ffffffffb8936047 #16 [ffffa6d14183fac8] rtnetlink_rcv_msg at ffffffffb88c7c31 #17 [ffffa6d14183fb50] netlink_rcv_skb at ffffffffb8942853 #18 [ffffa6d14183fbc0] rtnetlink_rcv at ffffffffb88c1835 #19 [ffffa6d14183fbd0] netlink_unicast at ffffffffb8941f27 #20 [ffffa6d14183fc18] netlink_sendmsg at ffffffffb8942245 #21 [ffffa6d14183fc98] sock_sendmsg at ffffffffb887d482 #22 [ffffa6d14183fcb8] ____sys_sendmsg at ffffffffb887d81a #23 [ffffa6d14183fd38] ___sys_sendmsg at ffffffffb88806e2 vvfedorenko#24 [ffffa6d14183fe90] __sys_sendmsg at ffffffffb88807a2 vvfedorenko#25 [ffffa6d14183ff28] __x64_sys_sendmsg at ffffffffb888080f vvfedorenko#26 [ffffa6d14183ff38] do_syscall_64 at ffffffffb8b9b6a8 vvfedorenko#27 [ffffa6d14183ff50] entry_SYSCALL_64_after_hwframe at ffffffffb8c0007c crash> bt 0xffff8aeb07544000 PID: 1110766 TASK: ffff8aeb07544000 CPU: 0 COMMAND: "kworker/u20:9" #0 [ffffa6d14e6b7bd8] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14e6b7c68] schedule at ffffffffb8ba8418 #2 [ffffa6d14e6b7c88] schedule_timeout at ffffffffb8baef88 #3 [ffffa6d14e6b7d10] wait_for_completion at ffffffffb8ba968b #4 [ffffa6d14e6b7d60] mlx5e_take_all_encap_flows at ffffffffc0f47ec4 [mlx5_core] #5 [ffffa6d14e6b7da0] mlx5e_rep_update_flows at ffffffffc0f3e734 [mlx5_core] #6 [ffffa6d14e6b7df8] mlx5e_rep_neigh_update at ffffffffc0f400bb [mlx5_core] #7 [ffffa6d14e6b7e50] process_one_work at ffffffffb80acc9c #8 [ffffa6d14e6b7ed0] worker_thread at ffffffffb80ad012 #9 [ffffa6d14e6b7f10] kthread at ffffffffb80b615d #10 [ffffa6d14e6b7f50] ret_from_fork at ffffffffb8001b2f After the first encap is attached, flow will be added to encap entry's flows list. If neigh update is running at this time, the following encaps of the flow can't hold the encap_tbl_lock and sleep. If neigh update thread is waiting for that flow's init_done, deadlock happens. Fix it by holding lock outside of the for loop. If neigh update is running, prevent encap flows from offloading. Since the lock is held outside of the for loop, concurrent creation of encap entries is not allowed. So remove unnecessary wait_for_completion call for res_ready. Fixes: 95435ad ("net/mlx5e: Only access fully initialized flows in neigh update") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

syzbot reported [0] a null-ptr-deref in sk_get_rmem0() while using IPPROTO_UDPLITE (0x88): 14:25:52 executing program 1: r0 = socket$inet6(0xa, 0x80002, 0x88) We had a similar report [1] for probably sk_memory_allocated_add() in __sk_mem_raise_allocated(), and commit c915fe1 ("udplite: fix NULL pointer dereference") fixed it by setting .memory_allocated for udplite_prot and udplitev6_prot. To fix the variant, we need to set either .sysctl_wmem_offset or .sysctl_rmem. Now UDP and UDPLITE share the same value for .memory_allocated, so we use the same .sysctl_wmem_offset for UDP and UDPLITE. [0]: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 6829 Comm: syz-executor.1 Not tainted 6.4.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 RIP: 0010:sk_get_rmem0 include/net/sock.h:2907 [inline] RIP: 0010:__sk_mem_raise_allocated+0x806/0x17a0 net/core/sock.c:3006 Code: c1 ea 03 80 3c 02 00 0f 85 23 0f 00 00 48 8b 44 24 08 48 8b 98 38 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <0f> b6 14 02 48 89 d8 83 e0 07 83 c0 03 38 d0 0f 8d 6f 0a 00 00 8b RSP: 0018:ffffc90005d7f450 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc90004d92000 RDX: 0000000000000000 RSI: ffffffff88066482 RDI: ffffffff8e2ccbb8 RBP: ffff8880173f7000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000030000 R13: 0000000000000001 R14: 0000000000000340 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880b9800000(0063) knlGS:00000000f7f1cb40 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 000000002e82f000 CR3: 0000000034ff0000 CR4: 00000000003506f0 Call Trace: <TASK> __sk_mem_schedule+0x6c/0xe0 net/core/sock.c:3077 udp_rmem_schedule net/ipv4/udp.c:1539 [inline] __udp_enqueue_schedule_skb+0x776/0xb30 net/ipv4/udp.c:1581 __udpv6_queue_rcv_skb net/ipv6/udp.c:666 [inline] udpv6_queue_rcv_one_skb+0xc39/0x16c0 net/ipv6/udp.c:775 udpv6_queue_rcv_skb+0x194/0xa10 net/ipv6/udp.c:793 __udp6_lib_mcast_deliver net/ipv6/udp.c:906 [inline] __udp6_lib_rcv+0x1bda/0x2bd0 net/ipv6/udp.c:1013 ip6_protocol_deliver_rcu+0x2e7/0x1250 net/ipv6/ip6_input.c:437 ip6_input_finish+0x150/0x2f0 net/ipv6/ip6_input.c:482 NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ip6_input+0xa0/0xd0 net/ipv6/ip6_input.c:491 ip6_mc_input+0x40b/0xf50 net/ipv6/ip6_input.c:585 dst_input include/net/dst.h:468 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ipv6_rcv+0x250/0x380 net/ipv6/ip6_input.c:309 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5491 __netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5605 netif_receive_skb_internal net/core/dev.c:5691 [inline] netif_receive_skb+0x133/0x7a0 net/core/dev.c:5750 tun_rx_batched+0x4b3/0x7a0 drivers/net/tun.c:1553 tun_get_user+0x2452/0x39c0 drivers/net/tun.c:1989 tun_chr_write_iter+0xdf/0x200 drivers/net/tun.c:2035 call_write_iter include/linux/fs.h:1868 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x945/0xd50 fs/read_write.c:584 ksys_write+0x12b/0x250 fs/read_write.c:637 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203 entry_SYSENTER_compat_after_hwframe+0x70/0x82 RIP: 0023:0xf7f21579 Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 RSP: 002b:00000000f7f1c590 EFLAGS: 00000282 ORIG_RAX: 0000000000000004 RAX: ffffffffffffffda RBX: 00000000000000c8 RCX: 0000000020000040 RDX: 0000000000000083 RSI: 00000000f734e000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: Link: https://lore.kernel.org/netdev/CANaxB-yCk8hhP68L4Q2nFOJht8sqgXGGQO2AftpHs0u1xyGG5A@mail.gmail.com/ [1] Fixes: 850cbad ("udp: use it's own memory accounting schema") Reported-by: syzbot+444ca0907e96f7c5e48b@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=444ca0907e96f7c5e48b Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230523163305.66466-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Historically connect(AF_UNSPEC) has been abused by syzkaller and other fuzzers to trigger various bugs. A recent one triggers a divide-by-zero [1], and Paolo Abeni was able to diagnose the issue. tcp_recvmsg_locked() has tests about sk_state being not TCP_LISTEN and TCP REPAIR mode being not used. Then later if socket lock is released in sk_wait_data(), another thread can call connect(AF_UNSPEC), then make this socket a TCP listener. When recvmsg() is resumed, it can eventually call tcp_cleanup_rbuf() and attempt a divide by 0 in tcp_rcv_space_adjust() [1] This patch adds a new socket field, counting number of threads blocked in sk_wait_event() and inet_wait_for_connect(). If this counter is not zero, tcp_disconnect() returns an error. This patch adds code in blocking socket system calls, thus should not hurt performance of non blocking ones. Note that we probably could revert commit 499350a ("tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0") to restore original tcpi_rcv_mss meaning (was 0 if no payload was ever received on a socket) [1] divide error: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 13832 Comm: syz-executor.5 Not tainted 6.3.0-rc4-syzkaller-00224-g00c7b5f4ddc5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023 RIP: 0010:tcp_rcv_space_adjust+0x36e/0x9d0 net/ipv4/tcp_input.c:740 Code: 00 00 00 00 fc ff df 4c 89 64 24 48 8b 44 24 04 44 89 f9 41 81 c7 80 03 00 00 c1 e1 04 44 29 f0 48 63 c9 48 01 e9 48 0f af c1 <49> f7 f6 48 8d 04 41 48 89 44 24 40 48 8b 44 24 30 48 c1 e8 03 48 RSP: 0018:ffffc900033af660 EFLAGS: 00010206 RAX: 4a66b76cbade2c48 RBX: ffff888076640cc0 RCX: 00000000c334e4ac RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000001 RBP: 00000000c324e86c R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880766417f8 R13: ffff888028fbb980 R14: 0000000000000000 R15: 0000000000010344 FS: 00007f5bffbfe700(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32f25000 CR3: 000000007ced0000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_recvmsg_locked+0x100e/0x22e0 net/ipv4/tcp.c:2616 tcp_recvmsg+0x117/0x620 net/ipv4/tcp.c:2681 inet6_recvmsg+0x114/0x640 net/ipv6/af_inet6.c:670 sock_recvmsg_nosec net/socket.c:1017 [inline] sock_recvmsg+0xe2/0x160 net/socket.c:1038 ____sys_recvmsg+0x210/0x5a0 net/socket.c:2720 ___sys_recvmsg+0xf2/0x180 net/socket.c:2762 do_recvmmsg+0x25e/0x6e0 net/socket.c:2856 __sys_recvmmsg net/socket.c:2935 [inline] __do_sys_recvmmsg net/socket.c:2958 [inline] __se_sys_recvmmsg net/socket.c:2951 [inline] __x64_sys_recvmmsg+0x20f/0x260 net/socket.c:2951 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f5c0108c0f9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f5bffbfe168 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00007f5c011ac050 RCX: 00007f5c0108c0f9 RDX: 0000000000000001 RSI: 0000000020000bc0 RDI: 0000000000000003 RBP: 00007f5c010e7b39 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000122 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f5c012cfb1f R14: 00007f5bffbfe300 R15: 0000000000022000 </TASK> Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Paolo Abeni <pabeni@redhat.com> Diagnosed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20230526163458.2880232-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We encountered a crash when using SMCRv2. It is caused by a logical error in smc_llc_fill_ext_v2(). BUG: kernel NULL pointer dereference, address: 0000000000000014 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 453 Comm: kworker/7:4 Kdump: loaded Tainted: G W E 6.4.0-rc3+ #44 Workqueue: events smc_llc_add_link_work [smc] RIP: 0010:smc_llc_fill_ext_v2+0x117/0x280 [smc] RSP: 0018:ffffacb5c064bd88 EFLAGS: 00010282 RAX: ffff9a6bc1c3c02c RBX: ffff9a6be3558000 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000002 RDI: 000000000000000a RBP: ffffacb5c064bdb8 R08: 0000000000000040 R09: 000000000000000c R10: ffff9a6bc0910300 R11: 0000000000000002 R12: 0000000000000000 R13: 0000000000000002 R14: ffff9a6bc1c3c02c R15: ffff9a6be3558250 FS: 0000000000000000(0000) GS:ffff9a6eefdc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000014 CR3: 000000010b078003 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> smc_llc_send_add_link+0x1ae/0x2f0 [smc] smc_llc_srv_add_link+0x2c9/0x5a0 [smc] ? cc_mkenc+0x40/0x60 smc_llc_add_link_work+0xb8/0x140 [smc] process_one_work+0x1e5/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> When an alernate RNIC is available in system, SMC will try to add a new link based on the RNIC for resilience. All the RMBs in use will be mapped to the new link. Then the RMBs' MRs corresponding to the new link will be filled into SMCRv2 LLC ADD LINK messages. However, smc_llc_fill_ext_v2() mistakenly accesses to unused RMBs which haven't been mapped to the new link and have no valid MRs, thus causing a crash. So this patch fixes the logic. Fixes: b4ba465 ("net/smc: extend LLC layer for SMC-Rv2") Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Frank reported boot regression in ia64 as: ELILO v3.16 for EFI/IA-64 .. Uncompressing Linux... done Loading file AC100221.initrd.img...done [ 0.000000] Linux version 6.4.0-rc3 (root@x4270) (ia64-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39) #1 SMP Thu May 25 15:52:20 CEST 2023 [ 0.000000] efi: EFI v1.1 by HP [ 0.000000] efi: SALsystab=0x3ee7a000 ACPI 2.0=0x3fe2a000 ESI=0x3ee7b000 SMBIOS=0x3ee7c000 HCDP=0x3fe28000 [ 0.000000] PCDP: v3 at 0x3fe28000 [ 0.000000] earlycon: uart8250 at MMIO 0x00000000f4050000 (options '9600n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000003FE2A000 000028 (v02 HP ) [ 0.000000] ACPI: XSDT 0x000000003FE2A02C 0000CC (v01 HP rx2620 00000000 HP 00000000) [...] [ 3.793350] Run /init as init process Loading, please wait... Starting systemd-udevd version 252.6-1 [ 3.951100] ------------[ cut here ]------------ [ 3.951100] WARNING: CPU: 6 PID: 140 at kernel/module/main.c:1547 __layout_sections+0x370/0x3c0 [ 3.949512] Unable to handle kernel paging request at virtual address 1000000000000000 [ 3.951100] Modules linked in: [ 3.951100] CPU: 6 PID: 140 Comm: (udev-worker) Not tainted 6.4.0-rc3 #1 [ 3.956161] (udev-worker)[142]: Oops 11003706212352 [1] [ 3.951774] Hardware name: hp server rx2620 , BIOS 04.29 11/30/2007 [ 3.951774] [ 3.951774] Call Trace: [ 3.958339] Unable to handle kernel paging request at virtual address 1000000000000000 [ 3.956161] Modules linked in: [ 3.951774] [<a0000001000156d0>] show_stack.part.0+0x30/0x60 [ 3.951774] sp=e000000183a67b20 bsp=e000000183a61628 [ 3.956161] [ 3.956161] which bisect to module_memory change [1]. Debug showed that ia64 uses some special sections: __layout_sections: section .got (sh_flags 10000002) matched to MOD_INVALID __layout_sections: section .sdata (sh_flags 10000003) matched to MOD_INVALID __layout_sections: section .sbss (sh_flags 10000003) matched to MOD_INVALID All these sections are loaded to module core memory before [1]. Fix ia64 boot by loading these sections to MOD_DATA (core rw data). [1] commit ac3b432 ("module: replace module_layout with module_memory") Fixes: ac3b432 ("module: replace module_layout with module_memory") Reported-by: Frank Scheiner <frank.scheiner@web.de> Closes: https://lists.debian.org/debian-ia64/2023/05/msg00010.html Closes: https://marc.info/?l=linux-ia64&m=168509859125505 Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Song Liu <song@kernel.org> Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>

Jiri Pirko says: ==================== devlink: move port ops into separate structure In devlink, some of the objects have separate ops registered alongside with the object itself. Port however have ops in devlink_ops structure. For drivers what register multiple kinds of ports with different ops this is not convenient. This patchset changes does following changes: 1) Introduces devlink_port_ops with functions that allow devlink port to be registered passing a pointer to driver port ops. (patch #1) 2) Converts drivers to define port_ops and register ports passing the ops pointer. (patches #2, #3, #4, #6, #8, and #9) 3) Moves ops from devlink_ops struct to devlink_port_ops. (patches #5, #7, #10-15) No functional changes. ==================== Link: https://lore.kernel.org/r/20230526102841.2226553-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When use the following command to test: 1)ip link add bond0 type bond 2)ip link set bond0 up 3)tc qdisc add dev bond0 root handle ffff: mq 4)tc qdisc replace dev bond0 parent ffff:fff1 handle ffff: mq The kernel reports NULL pointer dereference issue. The stack information is as follows: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Internal error: Oops: 0000000096000006 [#1] SMP Modules linked in: pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mq_attach+0x44/0xa0 lr : qdisc_graft+0x20c/0x5cc sp : ffff80000e2236a0 x29: ffff80000e2236a0 x28: ffff0000c0e59d80 x27: ffff0000c0be19c0 x26: ffff0000cae3e800 x25: 0000000000000010 x24: 00000000fffffff1 x23: 0000000000000000 x22: ffff0000cae3e800 x21: ffff0000c9df4000 x20: ffff0000c9df4000 x19: 0000000000000000 x18: ffff80000a934000 x17: ffff8000f5b56000 x16: ffff80000bb08000 x15: 0000000000000000 x14: 0000000000000000 x13: 6b6b6b6b6b6b6b6b x12: 6b6b6b6b00000001 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff0000c0be0730 x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000008 x5 : ffff0000cae3e864 x4 : 0000000000000000 x3 : 0000000000000001 x2 : 0000000000000001 x1 : ffff8000090bc23c x0 : 0000000000000000 Call trace: mq_attach+0x44/0xa0 qdisc_graft+0x20c/0x5cc tc_modify_qdisc+0x1c4/0x664 rtnetlink_rcv_msg+0x354/0x440 netlink_rcv_skb+0x64/0x144 rtnetlink_rcv+0x28/0x34 netlink_unicast+0x1e8/0x2a4 netlink_sendmsg+0x308/0x4a0 sock_sendmsg+0x64/0xac ____sys_sendmsg+0x29c/0x358 ___sys_sendmsg+0x90/0xd0 __sys_sendmsg+0x7c/0xd0 __arm64_sys_sendmsg+0x2c/0x38 invoke_syscall+0x54/0x114 el0_svc_common.constprop.1+0x90/0x174 do_el0_svc+0x3c/0xb0 el0_svc+0x24/0xec el0t_64_sync_handler+0x90/0xb4 el0t_64_sync+0x174/0x178 This is because when mq is added for the first time, qdiscs in mq is set to NULL in mq_attach(). Therefore, when replacing mq after adding mq, we need to initialize qdiscs in the mq before continuing to graft. Otherwise, it will couse NULL pointer dereference issue in mq_attach(). And the same issue will occur in the attach functions of mqprio, taprio and htb. ffff:fff1 means that the repalce qdisc is ingress. Ingress does not allow any qdisc to be attached. Therefore, ffff:fff1 is incorrectly used, and the command should be dropped. Fixes: 6ec1c69 ("net_sched: add classful multiqueue dummy scheduler") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Tested-by: Peilin Ye <peilin.ye@bytedance.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20230527093747.3583502-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says: ==================== Add layer 2 miss indication and filtering tl;dr ===== This patchset adds a single bit to the tc skb extension to indicate that a packet encountered a layer 2 miss in the bridge and extends flower to match on this metadata. This is required for non-DF (Designated Forwarder) filtering in EVPN multi-homing which prevents decapsulated BUM packets from being forwarded multiple times to the same multi-homed host. Background ========== In a typical EVPN multi-homing setup each host is multi-homed using a set of links called ES (Ethernet Segment, i.e., LAG) to multiple leaf switches in a rack. These switches act as VTEPs and are not directly connected (as opposed to MLAG), but can communicate with each other (as well as with VTEPs in remote racks) via spine switches over L3. When a host sends a BUM packet over ES1 to VTEP1, the VTEP will flood it to other VTEPs in the network, including those connected to the host over ES1. The receiving VTEPs must drop the packet and not forward it back to the host. This is called "split-horizon filtering" (SPH) [1]. FRR configures SPH filtering using two tc filters. The first, an ingress filter that matches on packets received from VTEP1 and marks them using a fwmark (firewall mark). The second, an egress filter configured on the LAG interface connected to the host that matches on the fwmark and drops the packets. Example: # tc filter add dev vxlan0 ingress pref 1 proto all flower enc_src_ip $VTEP1_IP action skbedit mark 101 # tc filter add dev bond0 egress pref 1 handle 101 fw action drop Motivation ========== For each ES, only one VTEP is elected by the control plane as the DF. The DF is responsible for forwarding decapsulated BUM traffic to the host over the ES. The non-DF VTEPs must drop such traffic as otherwise the host will receive multiple copies of BUM traffic. This is called "non-DF filtering" [2]. Filtering of multicast and broadcast traffic can be achieved using the following flower filter: # tc filter add dev bond0 egress pref 1 proto all flower indev vxlan0 dst_mac 01:00:00:00:00:00/01:00:00:00:00:00 action drop Unlike broadcast and multicast traffic, it is not currently possible to filter unknown unicast traffic. The classification into unknown unicast is performed by the bridge driver, but is not visible to other layers. Implementation ============== The proposed solution is to add a single bit to the tc skb extension that is set by the bridge for packets that encountered an FDB or MDB miss. The flower classifier is extended to be able to match on this new metadata bit in a similar fashion to existing metadata options such as 'indev'. A bit that is set for every flooded packet would also work, but it does not allow us to differentiate between registered and unregistered multicast traffic which might be useful in the future. A relatively generic name is chosen for this bit - 'l2_miss' - to allow its use to be extended to other layer 2 devices such as VXLAN, should a use case arise. With the above, the control plane can implement a non-DF filter using the following tc filters: # tc filter add dev bond0 egress pref 1 proto all flower indev vxlan0 dst_mac 01:00:00:00:00:00/01:00:00:00:00:00 action drop # tc filter add dev bond0 egress pref 2 proto all flower indev vxlan0 l2_miss true action drop The first drops broadcast and multicast traffic and the second drops unknown unicast traffic. Testing ======= A test exercising the different permutations of the 'l2_miss' bit is added in patch #8. Patchset overview ================= Patch #1 adds the new bit to the tc skb extension and sets it in the bridge driver for packets that encountered a miss. The marking of the packets and the use of this extension is protected by the 'tc_skb_ext_tc' static key in order to keep performance impact to a minimum when the feature is not in use. Patch #2 extends the flow dissector to dissect this information from the tc skb extension into the 'FLOW_DISSECTOR_KEY_META' key. Patch #3 extends the flower classifier to be able to match on the new layer 2 miss metadata. The classifier enables the 'tc_skb_ext_tc' static key upon the installation of the first filter that matches on 'l2_miss' and disables the key upon the removal of the last filter that matches on it. Patch #4 rejects matching on the new metadata in drivers that already support the 'FLOW_DISSECTOR_KEY_META' key. Patches #5-#6 are small preparations in mlxsw. Patch #7 extends mlxsw to be able to match on layer 2 miss. Patch #8 adds a selftest. iproute2 patches can be found here [3]. [1] https://datatracker.ietf.org/doc/html/rfc7432#section-8.3 [2] https://datatracker.ietf.org/doc/html/rfc7432#section-8.5 [3] https://github.com/idosch/iproute2/tree/submit/non_df_filter_v1 [4] https://lore.kernel.org/netdev/20230518113328.1952135-1-idosch@nvidia.com/ [5] https://lore.kernel.org/netdev/20230509070446.246088-1-idosch@nvidia.com/ ==================== Link: https://lore.kernel.org/r/20230529114835.372140-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlx5 add IRQs to rmap upon MSIX request, and mlx5 remove rmap from MSIX only if msi_map.index is populated. However, msi_map.index is populated only when dynamic MSIX is supported. This results in freeing IRQs without removing them from rmap, which triggers the bellow WARN_ON[1]. rmap is a feature which have no relation to dynamic MSIX. Hence, remove the check of msi_map.index when removing IRQ from rmap. [1] [ 200.307160 ] WARNING: CPU: 20 PID: 1702 at kernel/irq/manage.c:2034 free_irq+0x2ac/0x358 [ 200.316990 ] CPU: 20 PID: 1702 Comm: modprobe Not tainted 6.4.0-rc3_for_upstream_min_debug_2023_05_24_14_02 #1 [ 200.318939 ] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 200.321659 ] pc : free_irq+0x2ac/0x358 [ 200.322400 ] lr : free_irq+0x20/0x358 [ 200.337865 ] Call trace: [ 200.338360 ] free_irq+0x2ac/0x358 [ 200.339029 ] irq_release+0x58/0xd0 [mlx5_core] [ 200.340093 ] mlx5_irqs_release_vectors+0x80/0xb0 [mlx5_core] [ 200.341344 ] destroy_comp_eqs+0x120/0x170 [mlx5_core] [ 200.342469 ] mlx5_eq_table_destroy+0x1c/0x38 [mlx5_core] [ 200.343645 ] mlx5_unload+0x8c/0xc8 [mlx5_core] [ 200.344652 ] mlx5_uninit_one+0x78/0x118 [mlx5_core] [ 200.345745 ] remove_one+0x80/0x108 [mlx5_core] [ 200.346752 ] pci_device_remove+0x40/0xd8 [ 200.347554 ] device_remove+0x50/0x88 [ 200.348272 ] device_release_driver_internal+0x1c4/0x228 [ 200.349312 ] driver_detach+0x54/0xa0 [ 200.350030 ] bus_remove_driver+0x74/0x100 [ 200.350833 ] driver_unregister+0x34/0x68 [ 200.351619 ] pci_unregister_driver+0x28/0xa0 [ 200.352476 ] mlx5_cleanup+0x14/0x2210 [mlx5_core] [ 200.353536 ] __arm64_sys_delete_module+0x190/0x2e8 [ 200.354495 ] el0_svc_common.constprop.0+0x6c/0x1d0 [ 200.355455 ] do_el0_svc+0x38/0x98 [ 200.356122 ] el0_svc+0x1c/0x80 [ 200.356739 ] el0t_64_sync_handler+0xb4/0x130 [ 200.357604 ] el0t_64_sync+0x174/0x178 [ 200.358345 ] ---[ end trace 0000000000000000 ]--- Fixes: 3354822 ("net/mlx5: Use dynamic msix vectors allocation") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

@irqd

[ 9.837087] mlx5_core 0000:02:00.0: firmware version: 16.35.2000 [ 9.843126] mlx5_core 0000:02:00.0: 126.016 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x16 link) [ 10.311515] mlx5_core 0000:02:00.0: Rate limit: 127 rates are supported, range: 0Mbps to 97656Mbps [ 10.321948] mlx5_core 0000:02:00.0: E-Switch: Total vports 2, per vport: max uc(128) max mc(2048) [ 10.344324] mlx5_core 0000:02:00.0: mlx5_pcie_event:301:(pid 88): PCIe slot advertised sufficient power (27W). [ 10.354339] BUG: unable to handle page fault for address: ffffffff8ff0ade0 [ 10.361206] #PF: supervisor read access in kernel mode [ 10.366335] #PF: error_code(0x0000) - not-present page [ 10.371467] PGD 81ec39067 P4D 81ec39067 PUD 81ec3a063 PMD 114b07063 PTE 800ffff7e10f5062 [ 10.379544] Oops: 0000 [#1] PREEMPT SMP PTI [ 10.383721] CPU: 0 PID: 117 Comm: kworker/0:6 Not tainted 6.3.0-13028-g7222f123c983 #1 [ 10.391625] Hardware name: Supermicro X10SRA-F/X10SRA-F, BIOS 2.0b 06/12/2017 [ 10.398750] Workqueue: events work_for_cpu_fn [ 10.403108] RIP: 0010:__bitmap_or+0x10/0x26 [ 10.407286] Code: 85 c0 0f 95 c0 c3 cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 89 c9 31 c0 48 83 c1 3f 48 c1 e9 06 39 c> [ 10.426024] RSP: 0000:ffffb45a0078f7b0 EFLAGS: 00010097 [ 10.431240] RAX: 0000000000000000 RBX: ffffffff8ff0adc0 RCX: 0000000000000004 [ 10.438365] RDX: ffff9156801967d0 RSI: ffffffff8ff0ade0 RDI: ffff9156801967b0 [ 10.445489] RBP: ffffb45a0078f7e8 R08: 0000000000000030 R09: 0000000000000000 [ 10.452613] R10: 0000000000000000 R11: 0000000000000000 R12: 00000000000000ec [ 10.459737] R13: ffffffff8ff0ade0 R14: 0000000000000001 R15: 0000000000000020 [ 10.466862] FS: 0000000000000000(0000) GS:ffff9165bfc00000(0000) knlGS:0000000000000000 [ 10.474936] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 10.480674] CR2: ffffffff8ff0ade0 CR3: 00000001011ae003 CR4: 00000000003706f0 [ 10.487800] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 10.494922] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 10.502046] Call Trace: [ 10.504493] <TASK> [ 10.506589] ? matrix_alloc_area.constprop.0+0x43/0x9a [ 10.511729] ? prepare_namespace+0x84/0x174 [ 10.515914] irq_matrix_reserve_managed+0x56/0x10c [ 10.520699] x86_vector_alloc_irqs+0x1d2/0x31e [ 10.525146] irq_domain_alloc_irqs_hierarchy+0x39/0x3f [ 10.530284] irq_domain_alloc_irqs_parent+0x1a/0x2a [ 10.535155] intel_irq_remapping_alloc+0x59/0x5e9 [ 10.539859] ? kmem_cache_debug_flags+0x11/0x26 [ 10.544383] ? __radix_tree_lookup+0x39/0xb9 [ 10.548649] irq_domain_alloc_irqs_hierarchy+0x39/0x3f [ 10.553779] irq_domain_alloc_irqs_parent+0x1a/0x2a [ 10.558650] msi_domain_alloc+0x8c/0x120 [ 10.567697] irq_domain_alloc_irqs_locked+0x11d/0x286 [ 10.572741] __irq_domain_alloc_irqs+0x72/0x93 [ 10.577179] __msi_domain_alloc_irqs+0x193/0x3f1 [ 10.581789] ? __xa_alloc+0xcf/0xe2 [ 10.585273] msi_domain_alloc_irq_at+0xa8/0xfe [ 10.589711] pci_msix_alloc_irq_at+0x47/0x5c The crash is due to matrix_alloc_area() attempting to access per-CPU memory for CPUs that are not present on the system. The CPU mask passed into reserve_managed_vector() via it's @irqd parameter is corrupted because it contains uninitialized stack data. Fixes: bbac70c ("net/mlx5: Use newer affinity descriptor") Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The ice driver caches next_to_clean value at the beginning of ice_clean_rx_irq() in order to remember the first buffer that has to be freed/recycled after main Rx processing loop. The end boundary is indicated by first descriptor of frame that Rx processing loop has ended its duties. Note that if mentioned loop ended in the middle of gathering multi-buffer frame, next_to_clean would be pointing to the descriptor in the middle of the frame BUT freeing/recycling stage will stop at the first descriptor. This means that next iteration of ice_clean_rx_irq() will miss the (first_desc, next_to_clean - 1) entries. When running various 9K MTU workloads, such splats were observed: [ 540.780716] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 540.787787] #PF: supervisor read access in kernel mode [ 540.793002] #PF: error_code(0x0000) - not-present page [ 540.798218] PGD 0 P4D 0 [ 540.800801] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 540.805231] CPU: 18 PID: 3984 Comm: xskxceiver Tainted: G W 6.3.0-rc7+ #96 [ 540.813619] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 540.824209] RIP: 0010:ice_clean_rx_irq+0x2b6/0xf00 [ice] [ 540.829678] Code: 74 24 10 e9 aa 00 00 00 8b 55 78 41 31 57 10 41 09 c4 4d 85 ff 0f 84 83 00 00 00 49 8b 57 08 41 8b 4f 1c 65 8b 35 1a fa 4b 3f <48> 8b 02 48 c1 e8 3a 39 c6 0f 85 a2 00 00 00 f6 42 08 02 0f 85 98 [ 540.848717] RSP: 0018:ffffc9000f42fc50 EFLAGS: 00010282 [ 540.854029] RAX: 0000000000000004 RBX: 0000000000000002 RCX: 000000000000fffe [ 540.861272] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 00000000ffffffff [ 540.868519] RBP: ffff88984a05ac00 R08: 0000000000000000 R09: dead000000000100 [ 540.875760] R10: ffff88983fffcd00 R11: 000000000010f2b8 R12: 0000000000000004 [ 540.883008] R13: 0000000000000003 R14: 0000000000000800 R15: ffff889847a10040 [ 540.890253] FS: 00007f6ddf7fe640(0000) GS:ffff88afdf800000(0000) knlGS:0000000000000000 [ 540.898465] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 540.904299] CR2: 0000000000000000 CR3: 000000010d3da001 CR4: 00000000007706e0 [ 540.911542] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 540.918789] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 540.926032] PKRU: 55555554 [ 540.928790] Call Trace: [ 540.931276] <TASK> [ 540.933418] ice_napi_poll+0x4ca/0x6d0 [ice] [ 540.937804] ? __pfx_ice_napi_poll+0x10/0x10 [ice] [ 540.942716] napi_busy_loop+0xd7/0x320 [ 540.946537] xsk_recvmsg+0x143/0x170 [ 540.950178] sock_recvmsg+0x99/0xa0 [ 540.953729] __sys_recvfrom+0xa8/0x120 [ 540.957543] ? do_futex+0xbd/0x1d0 [ 540.961008] ? __x64_sys_futex+0x73/0x1d0 [ 540.965083] __x64_sys_recvfrom+0x20/0x30 [ 540.969155] do_syscall_64+0x38/0x90 [ 540.972796] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 540.977934] RIP: 0033:0x7f6de5f27934 To fix this, set cached_ntc to first_desc so that at the end, when freeing/recycling buffers, descriptors from first to ntc are not missed. Fixes: 2fba7dc ("ice: Add support for XDP multi-buffer on Rx side") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230531154457.3216621-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Lockdep reports a circular lock dependency between the srcu and the config_lock: [ 262.179917] -> #1 (&kvm->srcu){.+.+}-{0:0}: [ 262.182010] __synchronize_srcu+0xb0/0x224 [ 262.183422] synchronize_srcu_expedited+0x24/0x34 [ 262.184554] kvm_io_bus_register_dev+0x324/0x50c [ 262.185650] vgic_register_redist_iodev+0x254/0x398 [ 262.186740] vgic_v3_set_redist_base+0x3b0/0x724 [ 262.188087] kvm_vgic_addr+0x364/0x600 [ 262.189189] vgic_set_common_attr+0x90/0x544 [ 262.190278] vgic_v3_set_attr+0x74/0x9c [ 262.191432] kvm_device_ioctl+0x2a0/0x4e4 [ 262.192515] __arm64_sys_ioctl+0x7ac/0x1ba8 [ 262.193612] invoke_syscall.constprop.0+0x70/0x1e0 [ 262.195006] do_el0_svc+0xe4/0x2d4 [ 262.195929] el0_svc+0x44/0x8c [ 262.196917] el0t_64_sync_handler+0xf4/0x120 [ 262.198238] el0t_64_sync+0x190/0x194 [ 262.199224] [ 262.199224] -> #0 (&kvm->arch.config_lock){+.+.}-{3:3}: [ 262.201094] __lock_acquire+0x2b70/0x626c [ 262.202245] lock_acquire+0x454/0x778 [ 262.203132] __mutex_lock+0x190/0x8b4 [ 262.204023] mutex_lock_nested+0x24/0x30 [ 262.205100] vgic_mmio_write_v3_misc+0x5c/0x2a0 [ 262.206178] dispatch_mmio_write+0xd8/0x258 [ 262.207498] __kvm_io_bus_write+0x1e0/0x350 [ 262.208582] kvm_io_bus_write+0xe0/0x1cc [ 262.209653] io_mem_abort+0x2ac/0x6d8 [ 262.210569] kvm_handle_guest_abort+0x9b8/0x1f88 [ 262.211937] handle_exit+0xc4/0x39c [ 262.212971] kvm_arch_vcpu_ioctl_run+0x90c/0x1c04 [ 262.214154] kvm_vcpu_ioctl+0x450/0x12f8 [ 262.215233] __arm64_sys_ioctl+0x7ac/0x1ba8 [ 262.216402] invoke_syscall.constprop.0+0x70/0x1e0 [ 262.217774] do_el0_svc+0xe4/0x2d4 [ 262.218758] el0_svc+0x44/0x8c [ 262.219941] el0t_64_sync_handler+0xf4/0x120 [ 262.221110] el0t_64_sync+0x190/0x194 Note that the current report, which can be triggered by the vgic_irq kselftest, is a triple chain that includes slots_lock, but after inverting the slots_lock/config_lock dependency, the actual problem reported above remains. In several places, the vgic code calls kvm_io_bus_register_dev(), which synchronizes the srcu, while holding config_lock (#1). And the MMIO handler takes the config_lock while holding the srcu read lock (#0). Break dependency #1, by registering the distributor and redistributors without holding config_lock. The ITS also uses kvm_io_bus_register_dev() but already relies on slots_lock to serialize calls. The distributor iodev is created on the first KVM_RUN call. Multiple threads will race for vgic initialization, and only the first one will see !vgic_ready() under the lock. To serialize those threads, rely on slots_lock rather than config_lock. Redistributors are created earlier, through KVM_DEV_ARM_VGIC_GRP_ADDR ioctls and vCPU creation. Similarly, serialize the iodev creation with slots_lock, and the rest with config_lock. Fixes: f003277 ("KVM: arm64: Use config_lock to protect vgic state") Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230518100914.2837292-2-jean-philippe@linaro.org

When unloading the spi-mt65xx kernel module during an ongoing spi-mem operation the kernel will Oops shortly after unloading the module. This is because wait_for_completion_timeout was still running and returning into the no longer loaded module: Internal error: Oops: 0000000096000005 [#1] SMP Modules linked in: [many, but spi-mt65xx is no longer there] CPU: 0 PID: 2578 Comm: block Tainted: G W O 6.3.0-next-20230428+ #0 Hardware name: Bananapi BPI-R3 (DT) pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __lock_acquire+0x18c/0x20e8 lr : __lock_acquire+0x9b8/0x20e8 sp : ffffffc009ec3400 x29: ffffffc009ec3400 x28: 0000000000000001 x27: 0000000000000004 x26: ffffff80082888c8 x25: 0000000000000000 x24: 0000000000000000 x23: ffffffc009609da8 x22: ffffff8008288000 x21: ffffff8008288968 x20: 00000000000003c2 x19: ffffff8008be7990 x18: 00000000000002af x17: 0000000000000000 x16: 0000000000000000 x15: ffffffc008d78970 x14: 000000000000080d x13: 00000000000002af x12: 00000000ffffffea x11: 00000000ffffefff x10: ffffffc008dd0970 x9 : ffffffc008d78918 x8 : 0000000000017fe8 x7 : 0000000000000001 x6 : 0000000000000000 x5 : ffffff807fb53910 x4 : 0000000000000000 x3 : 0000000000000027 x2 : 0000000000000027 x1 : 0000000000000000 x0 : 00000000000c03c2 Call trace: __lock_acquire+0x18c/0x20e8 lock_acquire+0x100/0x2a4 _raw_spin_lock_irq+0x58/0x74 __wait_for_common+0xe0/0x1b4 wait_for_completion_timeout+0x1c/0x24 0xffffffc000acc8a4 <--- used to be mtk_spi_transfer_wait spi_mem_exec_op+0x390/0x3ec spi_mem_no_dirmap_read+0x6c/0x88 spi_mem_dirmap_read+0xcc/0x12c spinand_read_page+0xf8/0x1dc spinand_mtd_read+0x1b4/0x2fc mtd_read_oob_std+0x58/0x7c mtd_read_oob+0x8c/0x148 mtd_read+0x50/0x6c ... Prevent this by completing in mtk_spi_remove if needed. Fixes: 9f763fd ("spi: mediatek: add spi memory support for ipm design") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/r/ZFAF6pJxMu1z6k4w@makrotopia.org Signed-off-by: Mark Brown <broonie@kernel.org>

We may get an empty response with zero length at the beginning of the driver start and get following UBSAN error. Since there is no content(SDRT_NONE) for the response, just return and skip the response handling to avoid this problem. Test pass : SDIO wifi throughput test with this patch [ 126.980684] UBSAN: array-index-out-of-bounds in drivers/mmc/host/vub300.c:1719:12 [ 126.980709] index -1 is out of range for type 'u32 [4]' [ 126.980729] CPU: 4 PID: 9 Comm: kworker/u16:0 Tainted: G E 6.3.0-rc4-mtk-local-202304272142 #1 [ 126.980754] Hardware name: Intel(R) Client Systems NUC8i7BEH/NUC8BEB, BIOS BECFL357.86A.0081.2020.0504.1834 05/04/2020 [ 126.980770] Workqueue: kvub300c vub300_cmndwork_thread [vub300] [ 126.980833] Call Trace: [ 126.980845] <TASK> [ 126.980860] dump_stack_lvl+0x48/0x70 [ 126.980895] dump_stack+0x10/0x20 [ 126.980916] ubsan_epilogue+0x9/0x40 [ 126.980944] __ubsan_handle_out_of_bounds+0x70/0x90 [ 126.980979] vub300_cmndwork_thread+0x58e7/0x5e10 [vub300] [ 126.981018] ? _raw_spin_unlock+0x18/0x40 [ 126.981042] ? finish_task_switch+0x175/0x6f0 [ 126.981070] ? __switch_to+0x42e/0xda0 [ 126.981089] ? __switch_to_asm+0x3a/0x80 [ 126.981129] ? __pfx_vub300_cmndwork_thread+0x10/0x10 [vub300] [ 126.981174] ? __kasan_check_read+0x11/0x20 [ 126.981204] process_one_work+0x7ee/0x13d0 [ 126.981246] worker_thread+0x53c/0x1240 [ 126.981291] kthread+0x2b8/0x370 [ 126.981312] ? __pfx_worker_thread+0x10/0x10 [ 126.981336] ? __pfx_kthread+0x10/0x10 [ 126.981359] ret_from_fork+0x29/0x50 [ 126.981400] </TASK> Fixes: 88095e7 ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/048cd6972c50c33c2e8f81d5228fed928519918b.1683987673.git.deren.wu@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mwolech and others added 6 commits October 17, 2022 16:02

ice: fix pin register

fa413f8

Previously: - Only one pin structure was initialized. Init function iterated over same address, - Name was not used for pin initialization. Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Base#1

Base#1
kubalewski wants to merge 6 commits intonet-next-dpllfrom
base

kubalewski commented Oct 17, 2022

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

Conversation

kubalewski commented Oct 17, 2022

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants