Adding title in README.md file by kshithijiyer · Pull Request #10 · intel/linux-intel-lts

kshithijiyer · 2019-12-20T05:53:07Z

No description provided.

[ Upstream commit 6ee4051 ] Fail to allocate memory for tgid_map, because it requires order-6 page. detail as: c3 sh: page allocation failure: order:6, mode:0x140c0c0(GFP_KERNEL), nodemask=(null) c3 sh cpuset=/ mems_allowed=0 c3 CPU: 3 PID: 5632 Comm: sh Tainted: G W O 4.14.133+ #10 c3 Hardware name: Generic DT based system c3 Backtrace: c3 [<c010bdbc>] (dump_backtrace) from [<c010c08c>](show_stack+0x18/0x1c) c3 [<c010c074>] (show_stack) from [<c0993c54>](dump_stack+0x84/0xa4) c3 [<c0993bd0>] (dump_stack) from [<c0229858>](warn_alloc+0xc4/0x19c) c3 [<c0229798>] (warn_alloc) from [<c022a6e4>](__alloc_pages_nodemask+0xd18/0xf28) c3 [<c02299cc>] (__alloc_pages_nodemask) from [<c0248344>](kmalloc_order+0x20/0x38) c3 [<c0248324>] (kmalloc_order) from [<c0248380>](kmalloc_order_trace+0x24/0x108) c3 [<c024835c>] (kmalloc_order_trace) from [<c01e6078>](set_tracer_flag+0xb0/0x158) c3 [<c01e5fc8>] (set_tracer_flag) from [<c01e6404>](trace_options_core_write+0x7c/0xcc) c3 [<c01e6388>] (trace_options_core_write) from [<c0278b1c>](__vfs_write+0x40/0x14c) c3 [<c0278adc>] (__vfs_write) from [<c0278e10>](vfs_write+0xc4/0x198) c3 [<c0278d4c>] (vfs_write) from [<c027906c>](SyS_write+0x6c/0xd0) c3 [<c0279000>] (SyS_write) from [<c01079a0>](ret_fast_syscall+0x0/0x54) Switch to use kvcalloc to avoid unexpected allocation failures. Link: http://lkml.kernel.org/r/1571888070-24425-1-git-send-email-chunyan.zhang@unisoc.com Signed-off-by: Yuming Han <yuming.han@unisoc.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 32546a9 ] This patch moves the final part of the cifsFileInfo_put() logic where we need a write lock on lock_sem to be processed in a separate thread that holds no other locks. This is to prevent deadlocks like the one below: > there are 6 processes looping to while trying to down_write > cinode->lock_sem, 5 of them from _cifsFileInfo_put, and one from > cifs_new_fileinfo > > and there are 5 other processes which are blocked, several of them > waiting on either PG_writeback or PG_locked (which are both set), all > for the same page of the file > > 2 inode_lock() (inode->i_rwsem) for the file > 1 wait_on_page_writeback() for the page > 1 down_read(inode->i_rwsem) for the inode of the directory > 1 inode_lock()(inode->i_rwsem) for the inode of the directory > 1 __lock_page > > > so processes are blocked waiting on: > page flags PG_locked and PG_writeback for one specific page > inode->i_rwsem for the directory > inode->i_rwsem for the file > cifsInodeInflock_sem > > > > here are the more gory details (let me know if I need to provide > anything more/better): > > [0 00:48:22.765] [UN] PID: 8863 TASK: ffff8c691547c5c0 CPU: 3 > COMMAND: "reopen_file" > #0 [ffff9965007e3ba8] __schedule at ffffffff9b6e6095 > #1 [ffff9965007e3c38] schedule at ffffffff9b6e64df > #2 [ffff9965007e3c48] rwsem_down_write_slowpath at ffffffff9af283d7 > #3 [ffff9965007e3cb8] legitimize_path at ffffffff9b0f975d > #4 [ffff9965007e3d08] path_openat at ffffffff9b0fe55d > #5 [ffff9965007e3dd8] do_filp_open at ffffffff9b100a33 > #6 [ffff9965007e3ee0] do_sys_open at ffffffff9b0eb2d6 > #7 [ffff9965007e3f38] do_syscall_64 at ffffffff9ae04315 > * (I think legitimize_path is bogus) > > in path_openat > } else { > const char *s = path_init(nd, flags); > while (!(error = link_path_walk(s, nd)) && > (error = do_last(nd, file, op)) > 0) { <<<< > > do_last: > if (open_flag & O_CREAT) > inode_lock(dir->d_inode); <<<< > else > so it's trying to take inode->i_rwsem for the directory > > DENTRY INODE SUPERBLK TYPE PATH > ffff8c68bb8e79c0 ffff8c691158ef20 ffff8c6915bf9000 DIR /mnt/vm1_smb/ > inode.i_rwsem is ffff8c691158efc0 > > <struct rw_semaphore 0xffff8c691158efc0>: > owner: <struct task_struct 0xffff8c6914275d00> (UN - 8856 - > reopen_file), counter: 0x0000000000000003 > waitlist: 2 > 0xffff9965007e3c90 8863 reopen_file UN 0 1:29:22.926 > RWSEM_WAITING_FOR_WRITE > 0xffff996500393e00 9802 ls UN 0 1:17:26.700 > RWSEM_WAITING_FOR_READ > > > the owner of the inode.i_rwsem of the directory is: > > [0 00:00:00.109] [UN] PID: 8856 TASK: ffff8c6914275d00 CPU: 3 > COMMAND: "reopen_file" > #0 [ffff99650065b828] __schedule at ffffffff9b6e6095 > #1 [ffff99650065b8b8] schedule at ffffffff9b6e64df > #2 [ffff99650065b8c8] schedule_timeout at ffffffff9b6e9f89 > #3 [ffff99650065b940] msleep at ffffffff9af573a9 > #4 [ffff99650065b948] _cifsFileInfo_put.cold.63 at ffffffffc0a42dd6 [cifs] > #5 [ffff99650065ba38] cifs_writepage_locked at ffffffffc0a0b8f3 [cifs] > #6 [ffff99650065bab0] cifs_launder_page at ffffffffc0a0bb72 [cifs] > #7 [ffff99650065bb30] invalidate_inode_pages2_range at ffffffff9b04d4bd > #8 [ffff99650065bcb8] cifs_invalidate_mapping at ffffffffc0a11339 [cifs] > #9 [ffff99650065bcd0] cifs_revalidate_mapping at ffffffffc0a1139a [cifs] > #10 [ffff99650065bcf0] cifs_d_revalidate at ffffffffc0a014f6 [cifs] > #11 [ffff99650065bd08] path_openat at ffffffff9b0fe7f7 > #12 [ffff99650065bdd8] do_filp_open at ffffffff9b100a33 > #13 [ffff99650065bee0] do_sys_open at ffffffff9b0eb2d6 > #14 [ffff99650065bf38] do_syscall_64 at ffffffff9ae04315 > > cifs_launder_page is for page 0xffffd1e2c07d2480 > > crash> page.index,mapping,flags 0xffffd1e2c07d2480 > index = 0x8 > mapping = 0xffff8c68f3cd0db0 > flags = 0xfffffc0008095 > > PAGE-FLAG BIT VALUE > PG_locked 0 0000001 > PG_uptodate 2 0000004 > PG_lru 4 0000010 > PG_waiters 7 0000080 > PG_writeback 15 0008000 > > > inode is ffff8c68f3cd0c40 > inode.i_rwsem is ffff8c68f3cd0ce0 > DENTRY INODE SUPERBLK TYPE PATH > ffff8c68a1f1b480 ffff8c68f3cd0c40 ffff8c6915bf9000 REG > /mnt/vm1_smb/testfile.8853 > > > this process holds the inode->i_rwsem for the parent directory, is > laundering a page attached to the inode of the file it's opening, and in > _cifsFileInfo_put is trying to down_write the cifsInodeInflock_sem > for the file itself. > > > <struct rw_semaphore 0xffff8c68f3cd0ce0>: > owner: <struct task_struct 0xffff8c6914272e80> (UN - 8854 - > reopen_file), counter: 0x0000000000000003 > waitlist: 1 > 0xffff9965005dfd80 8855 reopen_file UN 0 1:29:22.912 > RWSEM_WAITING_FOR_WRITE > > this is the inode.i_rwsem for the file > > the owner: > > [0 00:48:22.739] [UN] PID: 8854 TASK: ffff8c6914272e80 CPU: 2 > COMMAND: "reopen_file" > #0 [ffff99650054fb38] __schedule at ffffffff9b6e6095 > #1 [ffff99650054fbc8] schedule at ffffffff9b6e64df > #2 [ffff99650054fbd8] io_schedule at ffffffff9b6e68e2 > #3 [ffff99650054fbe8] __lock_page at ffffffff9b03c56f > #4 [ffff99650054fc80] pagecache_get_page at ffffffff9b03dcdf > #5 [ffff99650054fcc0] grab_cache_page_write_begin at ffffffff9b03ef4c > #6 [ffff99650054fcd0] cifs_write_begin at ffffffffc0a064ec [cifs] > #7 [ffff99650054fd30] generic_perform_write at ffffffff9b03bba4 > #8 [ffff99650054fda8] __generic_file_write_iter at ffffffff9b04060a > #9 [ffff99650054fdf0] cifs_strict_writev.cold.70 at ffffffffc0a4469b [cifs] > #10 [ffff99650054fe48] new_sync_write at ffffffff9b0ec1dd > #11 [ffff99650054fed0] vfs_write at ffffffff9b0eed35 > #12 [ffff99650054ff00] ksys_write at ffffffff9b0eefd9 > #13 [ffff99650054ff38] do_syscall_64 at ffffffff9ae04315 > > the process holds the inode->i_rwsem for the file to which it's writing, > and is trying to __lock_page for the same page as in the other processes > > > the other tasks: > [0 00:00:00.028] [UN] PID: 8859 TASK: ffff8c6915479740 CPU: 2 > COMMAND: "reopen_file" > #0 [ffff9965007b39d8] __schedule at ffffffff9b6e6095 > #1 [ffff9965007b3a68] schedule at ffffffff9b6e64df > #2 [ffff9965007b3a78] schedule_timeout at ffffffff9b6e9f89 > #3 [ffff9965007b3af0] msleep at ffffffff9af573a9 > #4 [ffff9965007b3af8] cifs_new_fileinfo.cold.61 at ffffffffc0a42a07 [cifs] > #5 [ffff9965007b3b78] cifs_open at ffffffffc0a0709d [cifs] > #6 [ffff9965007b3cd8] do_dentry_open at ffffffff9b0e9b7a > #7 [ffff9965007b3d08] path_openat at ffffffff9b0fe34f > #8 [ffff9965007b3dd8] do_filp_open at ffffffff9b100a33 > #9 [ffff9965007b3ee0] do_sys_open at ffffffff9b0eb2d6 > #10 [ffff9965007b3f38] do_syscall_64 at ffffffff9ae04315 > > this is opening the file, and is trying to down_write cinode->lock_sem > > > [0 00:00:00.041] [UN] PID: 8860 TASK: ffff8c691547ae80 CPU: 2 > COMMAND: "reopen_file" > [0 00:00:00.057] [UN] PID: 8861 TASK: ffff8c6915478000 CPU: 3 > COMMAND: "reopen_file" > [0 00:00:00.059] [UN] PID: 8858 TASK: ffff8c6914271740 CPU: 2 > COMMAND: "reopen_file" > [0 00:00:00.109] [UN] PID: 8862 TASK: ffff8c691547dd00 CPU: 6 > COMMAND: "reopen_file" > #0 [ffff9965007c3c78] __schedule at ffffffff9b6e6095 > #1 [ffff9965007c3d08] schedule at ffffffff9b6e64df > #2 [ffff9965007c3d18] schedule_timeout at ffffffff9b6e9f89 > #3 [ffff9965007c3d90] msleep at ffffffff9af573a9 > #4 [ffff9965007c3d98] _cifsFileInfo_put.cold.63 at ffffffffc0a42dd6 [cifs] > #5 [ffff9965007c3e88] cifs_close at ffffffffc0a07aaf [cifs] > #6 [ffff9965007c3ea0] __fput at ffffffff9b0efa6e > #7 [ffff9965007c3ee8] task_work_run at ffffffff9aef1614 > #8 [ffff9965007c3f20] exit_to_usermode_loop at ffffffff9ae03d6f > #9 [ffff9965007c3f38] do_syscall_64 at ffffffff9ae0444c > > closing the file, and trying to down_write cifsi->lock_sem > > > [0 00:48:22.839] [UN] PID: 8857 TASK: ffff8c6914270000 CPU: 7 > COMMAND: "reopen_file" > #0 [ffff9965006a7cc8] __schedule at ffffffff9b6e6095 > #1 [ffff9965006a7d58] schedule at ffffffff9b6e64df > #2 [ffff9965006a7d68] io_schedule at ffffffff9b6e68e2 > #3 [ffff9965006a7d78] wait_on_page_bit at ffffffff9b03cac6 > #4 [ffff9965006a7e10] __filemap_fdatawait_range at ffffffff9b03b028 > #5 [ffff9965006a7ed8] filemap_write_and_wait at ffffffff9b040165 > #6 [ffff9965006a7ef0] cifs_flush at ffffffffc0a0c2fa [cifs] > #7 [ffff9965006a7f10] filp_close at ffffffff9b0e93f1 > #8 [ffff9965006a7f30] __x64_sys_close at ffffffff9b0e9a0e > #9 [ffff9965006a7f38] do_syscall_64 at ffffffff9ae04315 > > in __filemap_fdatawait_range > wait_on_page_writeback(page); > for the same page of the file > > > > [0 00:48:22.718] [UN] PID: 8855 TASK: ffff8c69142745c0 CPU: 7 > COMMAND: "reopen_file" > #0 [ffff9965005dfc98] __schedule at ffffffff9b6e6095 > #1 [ffff9965005dfd28] schedule at ffffffff9b6e64df > #2 [ffff9965005dfd38] rwsem_down_write_slowpath at ffffffff9af283d7 > #3 [ffff9965005dfdf0] cifs_strict_writev at ffffffffc0a0c40a [cifs] > #4 [ffff9965005dfe48] new_sync_write at ffffffff9b0ec1dd > #5 [ffff9965005dfed0] vfs_write at ffffffff9b0eed35 > #6 [ffff9965005dff00] ksys_write at ffffffff9b0eefd9 > #7 [ffff9965005dff38] do_syscall_64 at ffffffff9ae04315 > > inode_lock(inode); > > > and one 'ls' later on, to see whether the rest of the mount is available > (the test file is in the root, so we get blocked up on the directory > ->i_rwsem), so the entire mount is unavailable > > [0 00:36:26.473] [UN] PID: 9802 TASK: ffff8c691436ae80 CPU: 4 > COMMAND: "ls" > #0 [ffff996500393d28] __schedule at ffffffff9b6e6095 > #1 [ffff996500393db8] schedule at ffffffff9b6e64df > #2 [ffff996500393dc8] rwsem_down_read_slowpath at ffffffff9b6e9421 > #3 [ffff996500393e78] down_read_killable at ffffffff9b6e95e2 > #4 [ffff996500393e88] iterate_dir at ffffffff9b103c56 > #5 [ffff996500393ec8] ksys_getdents64 at ffffffff9b104b0c > #6 [ffff996500393f30] __x64_sys_getdents64 at ffffffff9b104bb6 > #7 [ffff996500393f38] do_syscall_64 at ffffffff9ae04315 > > in iterate_dir: > if (shared) > res = down_read_killable(&inode->i_rwsem); <<<< > else > res = down_write_killable(&inode->i_rwsem); > Reported-by: Frank Sorenson <sorenson@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6ee4051 ] Fail to allocate memory for tgid_map, because it requires order-6 page. detail as: c3 sh: page allocation failure: order:6, mode:0x140c0c0(GFP_KERNEL), nodemask=(null) c3 sh cpuset=/ mems_allowed=0 c3 CPU: 3 PID: 5632 Comm: sh Tainted: G W O 4.14.133+ #10 c3 Hardware name: Generic DT based system c3 Backtrace: c3 [<c010bdbc>] (dump_backtrace) from [<c010c08c>](show_stack+0x18/0x1c) c3 [<c010c074>] (show_stack) from [<c0993c54>](dump_stack+0x84/0xa4) c3 [<c0993bd0>] (dump_stack) from [<c0229858>](warn_alloc+0xc4/0x19c) c3 [<c0229798>] (warn_alloc) from [<c022a6e4>](__alloc_pages_nodemask+0xd18/0xf28) c3 [<c02299cc>] (__alloc_pages_nodemask) from [<c0248344>](kmalloc_order+0x20/0x38) c3 [<c0248324>] (kmalloc_order) from [<c0248380>](kmalloc_order_trace+0x24/0x108) c3 [<c024835c>] (kmalloc_order_trace) from [<c01e6078>](set_tracer_flag+0xb0/0x158) c3 [<c01e5fc8>] (set_tracer_flag) from [<c01e6404>](trace_options_core_write+0x7c/0xcc) c3 [<c01e6388>] (trace_options_core_write) from [<c0278b1c>](__vfs_write+0x40/0x14c) c3 [<c0278adc>] (__vfs_write) from [<c0278e10>](vfs_write+0xc4/0x198) c3 [<c0278d4c>] (vfs_write) from [<c027906c>](SyS_write+0x6c/0xd0) c3 [<c0279000>] (SyS_write) from [<c01079a0>](ret_fast_syscall+0x0/0x54) Switch to use kvcalloc to avoid unexpected allocation failures. Link: http://lkml.kernel.org/r/1571888070-24425-1-git-send-email-chunyan.zhang@unisoc.com Signed-off-by: Yuming Han <yuming.han@unisoc.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

Luca Abeni reported this: | BUG: scheduling while atomic: kworker/u8:2/15203/0x00000003 | CPU: 1 PID: 15203 Comm: kworker/u8:2 Not tainted 4.19.1-rt3 #10 | Call Trace: | rt_spin_lock+0x3f/0x50 | gen6_read32+0x45/0x1d0 [i915] | g4x_get_vblank_counter+0x36/0x40 [i915] | trace_event_raw_event_i915_pipe_update_start+0x7d/0xf0 [i915] The tracing events use trace_i915_pipe_update_start() among other events use functions acquire spin locks. A few trace points use intel_get_crtc_scanline(), others use ->get_vblank_counter() wich also might acquire a sleeping lock. Based on this I don't see any other way than disable trace points on RT. Cc: stable-rt@vger.kernel.org Reported-by: Luca Abeni <lucabe72@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

[ Upstream commit c194839 ] free_match_list could be called when the flow table is already locked. We need to pass this notation to tree_put_node. It fixes the following lockdep warnning: [ 1797.268537] ============================================ [ 1797.276837] WARNING: possible recursive locking detected [ 1797.285101] 5.5.0-rc5+ #10 Not tainted [ 1797.291641] -------------------------------------------- [ 1797.299917] handler10/9296 is trying to acquire lock: [ 1797.307885] ffff889ad399a0a0 (&node->lock){++++}, at: tree_put_node+0x1d5/0x210 [mlx5_core] [ 1797.319694] [ 1797.319694] but task is already holding lock: [ 1797.330904] ffff889ad399a0a0 (&node->lock){++++}, at: nested_down_write_ref_node.part.33+0x1a/0x60 [mlx5_core] [ 1797.344707] [ 1797.344707] other info that might help us debug this: [ 1797.356952] Possible unsafe locking scenario: [ 1797.356952] [ 1797.368333] CPU0 [ 1797.373357] ---- [ 1797.378364] lock(&node->lock); [ 1797.384222] lock(&node->lock); [ 1797.390031] [ 1797.390031] *** DEADLOCK *** [ 1797.390031] [ 1797.403003] May be due to missing lock nesting notation [ 1797.403003] [ 1797.414691] 3 locks held by handler10/9296: [ 1797.421465] #0: ffff889cf2c5a110 (&block->cb_lock){++++}, at: tc_setup_cb_add+0x70/0x250 [ 1797.432810] #1: ffff88a030081490 (&comp->sem){++++}, at: mlx5_devcom_get_peer_data+0x4c/0xb0 [mlx5_core] [ 1797.445829] #2: ffff889ad399a0a0 (&node->lock){++++}, at: nested_down_write_ref_node.part.33+0x1a/0x60 [mlx5_core] [ 1797.459913] [ 1797.459913] stack backtrace: [ 1797.469436] CPU: 1 PID: 9296 Comm: handler10 Kdump: loaded Not tainted 5.5.0-rc5+ #10 [ 1797.480643] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 [ 1797.491480] Call Trace: [ 1797.496701] dump_stack+0x96/0xe0 [ 1797.502864] __lock_acquire.cold.63+0xf8/0x212 [ 1797.510301] ? lockdep_hardirqs_on+0x250/0x250 [ 1797.517701] ? mark_held_locks+0x55/0xa0 [ 1797.524547] ? quarantine_put+0xb7/0x160 [ 1797.531422] ? lockdep_hardirqs_on+0x17d/0x250 [ 1797.538913] lock_acquire+0xd6/0x1f0 [ 1797.545529] ? tree_put_node+0x1d5/0x210 [mlx5_core] [ 1797.553701] down_write+0x94/0x140 [ 1797.560206] ? tree_put_node+0x1d5/0x210 [mlx5_core] [ 1797.568464] ? down_write_killable_nested+0x170/0x170 [ 1797.576925] ? del_hw_flow_group+0xde/0x1f0 [mlx5_core] [ 1797.585629] tree_put_node+0x1d5/0x210 [mlx5_core] [ 1797.593891] ? free_match_list.part.25+0x147/0x170 [mlx5_core] [ 1797.603389] free_match_list.part.25+0xe0/0x170 [mlx5_core] [ 1797.612654] _mlx5_add_flow_rules+0x17e2/0x20b0 [mlx5_core] [ 1797.621838] ? lock_acquire+0xd6/0x1f0 [ 1797.629028] ? esw_get_prio_table+0xb0/0x3e0 [mlx5_core] [ 1797.637981] ? alloc_insert_flow_group+0x420/0x420 [mlx5_core] [ 1797.647459] ? try_to_wake_up+0x4c7/0xc70 [ 1797.654881] ? lock_downgrade+0x350/0x350 [ 1797.662271] ? __mutex_unlock_slowpath+0xb1/0x3f0 [ 1797.670396] ? find_held_lock+0xac/0xd0 [ 1797.677540] ? mlx5_add_flow_rules+0xdc/0x360 [mlx5_core] [ 1797.686467] mlx5_add_flow_rules+0xdc/0x360 [mlx5_core] [ 1797.695134] ? _mlx5_add_flow_rules+0x20b0/0x20b0 [mlx5_core] [ 1797.704270] ? irq_exit+0xa5/0x170 [ 1797.710764] ? retint_kernel+0x10/0x10 [ 1797.717698] ? mlx5_eswitch_set_rule_source_port.isra.9+0x122/0x230 [mlx5_core] [ 1797.728708] mlx5_eswitch_add_offloaded_rule+0x465/0x6d0 [mlx5_core] [ 1797.738713] ? mlx5_eswitch_get_prio_range+0x30/0x30 [mlx5_core] [ 1797.748384] ? mlx5_fc_stats_work+0x670/0x670 [mlx5_core] [ 1797.757400] mlx5e_tc_offload_fdb_rules.isra.27+0x24/0x90 [mlx5_core] [ 1797.767665] mlx5e_tc_add_fdb_flow+0xaf8/0xd40 [mlx5_core] [ 1797.776886] ? mlx5e_encap_put+0xd0/0xd0 [mlx5_core] [ 1797.785562] ? mlx5e_alloc_flow.isra.43+0x18c/0x1c0 [mlx5_core] [ 1797.795353] __mlx5e_add_fdb_flow+0x2e2/0x440 [mlx5_core] [ 1797.804558] ? mlx5e_tc_update_neigh_used_value+0x8c0/0x8c0 [mlx5_core] [ 1797.815093] ? wait_for_completion+0x260/0x260 [ 1797.823272] mlx5e_configure_flower+0xe94/0x1620 [mlx5_core] [ 1797.832792] ? __mlx5e_add_fdb_flow+0x440/0x440 [mlx5_core] [ 1797.842096] ? down_read+0x11a/0x2e0 [ 1797.849090] ? down_write+0x140/0x140 [ 1797.856142] ? mlx5e_rep_indr_setup_block_cb+0xc0/0xc0 [mlx5_core] [ 1797.866027] tc_setup_cb_add+0x11a/0x250 [ 1797.873339] fl_hw_replace_filter+0x25e/0x320 [cls_flower] [ 1797.882385] ? fl_hw_destroy_filter+0x1c0/0x1c0 [cls_flower] [ 1797.891607] fl_change+0x1d54/0x1fb6 [cls_flower] [ 1797.899772] ? __rhashtable_insert_fast.constprop.50+0x9f0/0x9f0 [cls_flower] [ 1797.910728] ? lock_downgrade+0x350/0x350 [ 1797.918187] ? __radix_tree_lookup+0xa5/0x130 [ 1797.926046] ? fl_set_key+0x1590/0x1590 [cls_flower] [ 1797.934611] ? __rhashtable_insert_fast.constprop.50+0x9f0/0x9f0 [cls_flower] [ 1797.945673] tc_new_tfilter+0xcd1/0x1240 [ 1797.953138] ? tc_del_tfilter+0xb10/0xb10 [ 1797.960688] ? avc_has_perm_noaudit+0x92/0x320 [ 1797.968721] ? avc_has_perm_noaudit+0x1df/0x320 [ 1797.976816] ? avc_has_extended_perms+0x990/0x990 [ 1797.985090] ? mark_lock+0xaa/0x9e0 [ 1797.991988] ? match_held_lock+0x1b/0x240 [ 1797.999457] ? match_held_lock+0x1b/0x240 [ 1798.006859] ? find_held_lock+0xac/0xd0 [ 1798.014045] ? symbol_put_addr+0x40/0x40 [ 1798.021317] ? rcu_read_lock_sched_held+0xd0/0xd0 [ 1798.029460] ? tc_del_tfilter+0xb10/0xb10 [ 1798.036810] rtnetlink_rcv_msg+0x4d5/0x620 [ 1798.044236] ? rtnl_bridge_getlink+0x460/0x460 [ 1798.052034] ? lockdep_hardirqs_on+0x250/0x250 [ 1798.059837] ? match_held_lock+0x1b/0x240 [ 1798.067146] ? find_held_lock+0xac/0xd0 [ 1798.074246] netlink_rcv_skb+0xc6/0x1f0 [ 1798.081339] ? rtnl_bridge_getlink+0x460/0x460 [ 1798.089104] ? netlink_ack+0x440/0x440 [ 1798.096061] netlink_unicast+0x2d4/0x3b0 [ 1798.103189] ? netlink_attachskb+0x3f0/0x3f0 [ 1798.110724] ? _copy_from_iter_full+0xda/0x370 [ 1798.118415] netlink_sendmsg+0x3ba/0x6a0 [ 1798.125478] ? netlink_unicast+0x3b0/0x3b0 [ 1798.132705] ? netlink_unicast+0x3b0/0x3b0 [ 1798.139880] sock_sendmsg+0x94/0xa0 [ 1798.146332] ____sys_sendmsg+0x36c/0x3f0 [ 1798.153251] ? copy_msghdr_from_user+0x165/0x230 [ 1798.160941] ? kernel_sendmsg+0x30/0x30 [ 1798.167738] ___sys_sendmsg+0xeb/0x150 [ 1798.174411] ? sendmsg_copy_msghdr+0x30/0x30 [ 1798.181649] ? lock_downgrade+0x350/0x350 [ 1798.188559] ? rcu_read_lock_sched_held+0xd0/0xd0 [ 1798.196239] ? __fget+0x21d/0x320 [ 1798.202335] ? do_dup2+0x2a0/0x2a0 [ 1798.208499] ? lock_downgrade+0x350/0x350 [ 1798.215366] ? __fget_light+0xd6/0xf0 [ 1798.221808] ? syscall_trace_enter+0x369/0x5d0 [ 1798.229112] __sys_sendmsg+0xd3/0x160 [ 1798.235511] ? __sys_sendmsg_sock+0x60/0x60 [ 1798.242478] ? syscall_trace_enter+0x233/0x5d0 [ 1798.249721] ? syscall_slow_exit_work+0x280/0x280 [ 1798.257211] ? do_syscall_64+0x1e/0x2e0 [ 1798.263680] do_syscall_64+0x72/0x2e0 [ 1798.269950] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: bd71b08 ("net/mlx5: Support multiple updates of steering rules in parallel") Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b57a55e upstream. There is a KASAN slab-out-of-bounds: BUG: KASAN: slab-out-of-bounds in _copy_from_iter_full+0x783/0xaa0 Read of size 80 at addr ffff88810c35e180 by task mount.cifs/539 CPU: 1 PID: 539 Comm: mount.cifs Not tainted 4.19 #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0xdd/0x12a print_address_description+0xa7/0x540 kasan_report+0x1ff/0x550 check_memory_region+0x2f1/0x310 memcpy+0x2f/0x80 _copy_from_iter_full+0x783/0xaa0 tcp_sendmsg_locked+0x1840/0x4140 tcp_sendmsg+0x37/0x60 inet_sendmsg+0x18c/0x490 sock_sendmsg+0xae/0x130 smb_send_kvec+0x29c/0x520 __smb_send_rqst+0x3ef/0xc60 smb_send_rqst+0x25a/0x2e0 compound_send_recv+0x9e8/0x2af0 cifs_send_recv+0x24/0x30 SMB2_open+0x35e/0x1620 open_shroot+0x27b/0x490 smb2_open_op_close+0x4e1/0x590 smb2_query_path_info+0x2ac/0x650 cifs_get_inode_info+0x1058/0x28f0 cifs_root_iget+0x3bb/0xf80 cifs_smb3_do_mount+0xe00/0x14c0 cifs_do_mount+0x15/0x20 mount_fs+0x5e/0x290 vfs_kern_mount+0x88/0x460 do_mount+0x398/0x31e0 ksys_mount+0xc6/0x150 __x64_sys_mount+0xea/0x190 do_syscall_64+0x122/0x590 entry_SYSCALL_64_after_hwframe+0x44/0xa9 It can be reproduced by the following step: 1. samba configured with: server max protocol = SMB2_10 2. mount -o vers=default When parse the mount version parameter, the 'ops' and 'vals' was setted to smb30, if negotiate result is smb21, just update the 'ops' to smb21, but the 'vals' is still smb30. When add lease context, the iov_base is allocated with smb21 ops, but the iov_len is initiallited with the smb30. Because the iov_len is longer than iov_base, when send the message, copy array out of bounds. we need to keep the 'ops' and 'vals' consistent. Fixes: 9764c02 ("SMB3: Add support for multidialect negotiate (SMB2.1 and later)") Fixes: d5c7076 ("smb3: add smb3.1.1 to default dialect list") Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> [bwh: Backported to 4.14: We never switch to SMB3.1.1 here] Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f767078 upstream. There has oops as below happen on i.MX8MP EVK platform that has 6G bytes DDR memory. when (xmit->tail < xmit->head) && (xmit->head == 0), it setups one sg entry with sg->length is zero: sg_set_buf(sgl + 1, xmit->buf, xmit->head); if xmit->buf is allocated from >4G address space, and SDMA only support <4G address space, then dma_map_sg() will call swiotlb_map() to do bounce buffer copying and mapping. But swiotlb_map() don't allow sg entry's length is zero, otherwise report BUG_ON(). So the patch is to correct the tx DMA scatter list. Oops: [ 287.675715] kernel BUG at kernel/dma/swiotlb.c:497! [ 287.680592] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 287.686075] Modules linked in: [ 287.689133] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.3-00016-g3fdc4e0-dirty #10 [ 287.696872] Hardware name: FSL i.MX8MP EVK (DT) [ 287.701402] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 287.706199] pc : swiotlb_tbl_map_single+0x1fc/0x310 [ 287.711076] lr : swiotlb_map+0x60/0x148 [ 287.714909] sp : ffff800010003c00 [ 287.718221] x29: ffff800010003c00 x28: 0000000000000000 [ 287.723533] x27: 0000000000000040 x26: ffff800011ae0000 [ 287.728844] x25: ffff800011ae09f8 x24: 0000000000000000 [ 287.734155] x23: 00000001b7af9000 x22: 0000000000000000 [ 287.739465] x21: ffff000176409c10 x20: 00000000001f7ffe [ 287.744776] x19: ffff000176409c10 x18: 000000000000002e [ 287.750087] x17: 0000000000000000 x16: 0000000000000000 [ 287.755397] x15: 0000000000000000 x14: 0000000000000000 [ 287.760707] x13: ffff00017f334000 x12: 0000000000000001 [ 287.766018] x11: 00000000001fffff x10: 0000000000000000 [ 287.771328] x9 : 0000000000000003 x8 : 0000000000000000 [ 287.776638] x7 : 0000000000000000 x6 : 0000000000000000 [ 287.781949] x5 : 0000000000200000 x4 : 0000000000000000 [ 287.787259] x3 : 0000000000000001 x2 : 00000001b7af9000 [ 287.792570] x1 : 00000000fbfff000 x0 : 0000000000000000 [ 287.797881] Call trace: [ 287.800328] swiotlb_tbl_map_single+0x1fc/0x310 [ 287.804859] swiotlb_map+0x60/0x148 [ 287.808347] dma_direct_map_page+0xf0/0x130 [ 287.812530] dma_direct_map_sg+0x78/0xe0 [ 287.816453] imx_uart_dma_tx+0x134/0x2f8 [ 287.820374] imx_uart_dma_tx_callback+0xd8/0x168 [ 287.824992] vchan_complete+0x194/0x200 [ 287.828828] tasklet_action_common.isra.0+0x154/0x1a0 [ 287.833879] tasklet_action+0x24/0x30 [ 287.837540] __do_softirq+0x120/0x23c [ 287.841202] irq_exit+0xb8/0xd8 [ 287.844343] __handle_domain_irq+0x64/0xb8 [ 287.848438] gic_handle_irq+0x5c/0x148 [ 287.852185] el1_irq+0xb8/0x180 [ 287.855327] cpuidle_enter_state+0x84/0x360 [ 287.859508] cpuidle_enter+0x34/0x48 [ 287.863083] call_cpuidle+0x18/0x38 [ 287.866571] do_idle+0x1e0/0x280 [ 287.869798] cpu_startup_entry+0x20/0x40 [ 287.873721] rest_init+0xd4/0xe0 [ 287.876949] arch_call_rest_init+0xc/0x14 [ 287.880958] start_kernel+0x420/0x44c [ 287.884622] Code: 9124c021 9417aff8 a94363f7 17ffffd5 (d4210000) [ 287.890718] ---[ end trace 5bc44c4ab6b009ce ]--- [ 287.895334] Kernel panic - not syncing: Fatal exception in interrupt [ 287.901686] SMP: stopping secondary CPUs [ 288.905607] SMP: failed to stop secondary CPUs 0-1 [ 288.910395] Kernel Offset: disabled [ 288.913882] CPU features: 0x0002,2000200c [ 288.917888] Memory Limit: none [ 288.920944] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Reported-by: Eagle Zhou <eagle.zhou@nxp.com> Tested-by: Eagle Zhou <eagle.zhou@nxp.com> Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Cc: stable <stable@vger.kernel.org> Fixes: 7942f85 ("serial: imx: TX DMA: clean up sg initialization") Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/1581401761-6378-1-git-send-email-fugang.duan@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 5eed6f1 ] Commit 9b6f7e1 ("mm: rework memcg kernel stack accounting") will result in fork failing if allocating a kernel stack for a task in dup_task_struct exceeds the kernel memory allowance for that cgroup. Unfortunately, it also results in a crash. This is due to the code jumping to free_stack and calling free_thread_stack when the memcg kernel stack charge fails, but without tsk->stack pointing at the freshly allocated stack. This in turn results in the vfree_atomic in free_thread_stack oopsing with a backtrace like this: #5 [ffffc900244efc88] die at ffffffff8101f0ab #6 [ffffc900244efcb8] do_general_protection at ffffffff8101cb86 #7 [ffffc900244efce0] general_protection at ffffffff818ff082 [exception RIP: llist_add_batch+7] RIP: ffffffff8150d487 RSP: ffffc900244efd98 RFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff88085ef55980 RCX: 0000000000000000 RDX: ffff88085ef55980 RSI: 343834343531203a RDI: 343834343531203a RBP: ffffc900244efd98 R8: 0000000000000001 R9: ffff8808578c3600 R10: 0000000000000000 R11: 0000000000000001 R12: ffff88029f6c21c0 R13: 0000000000000286 R14: ffff880147759b00 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffffc900244efda0] vfree_atomic at ffffffff811df2c7 #9 [ffffc900244efdb8] copy_process at ffffffff81086e37 intel#10 [ffffc900244efe98] _do_fork at ffffffff810884e0 intel#11 [ffffc900244eff10] sys_vfork at ffffffff810887ff intel#12 [ffffc900244eff20] do_syscall_64 at ffffffff81002a43 RIP: 000000000049b948 RSP: 00007ffcdb307830 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 0000000000896030 RCX: 000000000049b948 RDX: 0000000000000000 RSI: 00007ffcdb307790 RDI: 00000000005d7421 RBP: 000000000067370f R8: 00007ffcdb3077b0 R9: 000000000001ed00 R10: 0000000000000008 R11: 0000000000000246 R12: 0000000000000040 R13: 000000000000000f R14: 0000000000000000 R15: 000000000088d018 ORIG_RAX: 000000000000003a CS: 0033 SS: 002b The simplest fix is to assign tsk->stack right where it is allocated. Link: http://lkml.kernel.org/r/20181214231726.7ee4843c@imladris.surriel.com Fixes: 9b6f7e1 ("mm: rework memcg kernel stack accounting") Signed-off-by: Rik van Riel <riel@surriel.com> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit f767078 upstream. There has oops as below happen on i.MX8MP EVK platform that has 6G bytes DDR memory. when (xmit->tail < xmit->head) && (xmit->head == 0), it setups one sg entry with sg->length is zero: sg_set_buf(sgl + 1, xmit->buf, xmit->head); if xmit->buf is allocated from >4G address space, and SDMA only support <4G address space, then dma_map_sg() will call swiotlb_map() to do bounce buffer copying and mapping. But swiotlb_map() don't allow sg entry's length is zero, otherwise report BUG_ON(). So the patch is to correct the tx DMA scatter list. Oops: [ 287.675715] kernel BUG at kernel/dma/swiotlb.c:497! [ 287.680592] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 287.686075] Modules linked in: [ 287.689133] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.3-00016-g3fdc4e0-dirty #10 [ 287.696872] Hardware name: FSL i.MX8MP EVK (DT) [ 287.701402] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 287.706199] pc : swiotlb_tbl_map_single+0x1fc/0x310 [ 287.711076] lr : swiotlb_map+0x60/0x148 [ 287.714909] sp : ffff800010003c00 [ 287.718221] x29: ffff800010003c00 x28: 0000000000000000 [ 287.723533] x27: 0000000000000040 x26: ffff800011ae0000 [ 287.728844] x25: ffff800011ae09f8 x24: 0000000000000000 [ 287.734155] x23: 00000001b7af9000 x22: 0000000000000000 [ 287.739465] x21: ffff000176409c10 x20: 00000000001f7ffe [ 287.744776] x19: ffff000176409c10 x18: 000000000000002e [ 287.750087] x17: 0000000000000000 x16: 0000000000000000 [ 287.755397] x15: 0000000000000000 x14: 0000000000000000 [ 287.760707] x13: ffff00017f334000 x12: 0000000000000001 [ 287.766018] x11: 00000000001fffff x10: 0000000000000000 [ 287.771328] x9 : 0000000000000003 x8 : 0000000000000000 [ 287.776638] x7 : 0000000000000000 x6 : 0000000000000000 [ 287.781949] x5 : 0000000000200000 x4 : 0000000000000000 [ 287.787259] x3 : 0000000000000001 x2 : 00000001b7af9000 [ 287.792570] x1 : 00000000fbfff000 x0 : 0000000000000000 [ 287.797881] Call trace: [ 287.800328] swiotlb_tbl_map_single+0x1fc/0x310 [ 287.804859] swiotlb_map+0x60/0x148 [ 287.808347] dma_direct_map_page+0xf0/0x130 [ 287.812530] dma_direct_map_sg+0x78/0xe0 [ 287.816453] imx_uart_dma_tx+0x134/0x2f8 [ 287.820374] imx_uart_dma_tx_callback+0xd8/0x168 [ 287.824992] vchan_complete+0x194/0x200 [ 287.828828] tasklet_action_common.isra.0+0x154/0x1a0 [ 287.833879] tasklet_action+0x24/0x30 [ 287.837540] __do_softirq+0x120/0x23c [ 287.841202] irq_exit+0xb8/0xd8 [ 287.844343] __handle_domain_irq+0x64/0xb8 [ 287.848438] gic_handle_irq+0x5c/0x148 [ 287.852185] el1_irq+0xb8/0x180 [ 287.855327] cpuidle_enter_state+0x84/0x360 [ 287.859508] cpuidle_enter+0x34/0x48 [ 287.863083] call_cpuidle+0x18/0x38 [ 287.866571] do_idle+0x1e0/0x280 [ 287.869798] cpu_startup_entry+0x20/0x40 [ 287.873721] rest_init+0xd4/0xe0 [ 287.876949] arch_call_rest_init+0xc/0x14 [ 287.880958] start_kernel+0x420/0x44c [ 287.884622] Code: 9124c021 9417aff8 a94363f7 17ffffd5 (d4210000) [ 287.890718] ---[ end trace 5bc44c4ab6b009ce ]--- [ 287.895334] Kernel panic - not syncing: Fatal exception in interrupt [ 287.901686] SMP: stopping secondary CPUs [ 288.905607] SMP: failed to stop secondary CPUs 0-1 [ 288.910395] Kernel Offset: disabled [ 288.913882] CPU features: 0x0002,2000200c [ 288.917888] Memory Limit: none [ 288.920944] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Reported-by: Eagle Zhou <eagle.zhou@nxp.com> Tested-by: Eagle Zhou <eagle.zhou@nxp.com> Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Cc: stable <stable@vger.kernel.org> Fixes: 7942f85 ("serial: imx: TX DMA: clean up sg initialization") Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/1581401761-6378-1-git-send-email-fugang.duan@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 1bc7896 ] When experimenting with bpf_send_signal() helper in our production environment (5.2 based), we experienced a deadlock in NMI mode: #5 [ffffc9002219f770] queued_spin_lock_slowpath at ffffffff8110be24 #6 [ffffc9002219f770] _raw_spin_lock_irqsave at ffffffff81a43012 #7 [ffffc9002219f780] try_to_wake_up at ffffffff810e7ecd #8 [ffffc9002219f7e0] signal_wake_up_state at ffffffff810c7b55 #9 [ffffc9002219f7f0] __send_signal at ffffffff810c8602 #10 [ffffc9002219f830] do_send_sig_info at ffffffff810ca31a #11 [ffffc9002219f868] bpf_send_signal at ffffffff8119d227 #12 [ffffc9002219f988] bpf_overflow_handler at ffffffff811d4140 #13 [ffffc9002219f9e0] __perf_event_overflow at ffffffff811d68cf #14 [ffffc9002219fa10] perf_swevent_overflow at ffffffff811d6a09 #15 [ffffc9002219fa38] ___perf_sw_event at ffffffff811e0f47 #16 [ffffc9002219fc30] __schedule at ffffffff81a3e04d #17 [ffffc9002219fc90] schedule at ffffffff81a3e219 #18 [ffffc9002219fca0] futex_wait_queue_me at ffffffff8113d1b9 #19 [ffffc9002219fcd8] futex_wait at ffffffff8113e529 #20 [ffffc9002219fdf0] do_futex at ffffffff8113ffbc #21 [ffffc9002219fec0] __x64_sys_futex at ffffffff81140d1c #22 [ffffc9002219ff38] do_syscall_64 at ffffffff81002602 #23 [ffffc9002219ff50] entry_SYSCALL_64_after_hwframe at ffffffff81c00068 The above call stack is actually very similar to an issue reported by Commit eac9153 ("bpf/stackmap: Fix deadlock with rq_lock in bpf_get_stack()") by Song Liu. The only difference is bpf_send_signal() helper instead of bpf_get_stack() helper. The above deadlock is triggered with a perf_sw_event. Similar to Commit eac9153, the below almost identical reproducer used tracepoint point sched/sched_switch so the issue can be easily caught. /* stress_test.c */ #include <stdio.h> #include <stdlib.h> #include <sys/mman.h> #include <pthread.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #define THREAD_COUNT 1000 char *filename; void *worker(void *p) { void *ptr; int fd; char *pptr; fd = open(filename, O_RDONLY); if (fd < 0) return NULL; while (1) { struct timespec ts = {0, 1000 + rand() % 2000}; ptr = mmap(NULL, 4096 * 64, PROT_READ, MAP_PRIVATE, fd, 0); usleep(1); if (ptr == MAP_FAILED) { printf("failed to mmap\n"); break; } munmap(ptr, 4096 * 64); usleep(1); pptr = malloc(1); usleep(1); pptr[0] = 1; usleep(1); free(pptr); usleep(1); nanosleep(&ts, NULL); } close(fd); return NULL; } int main(int argc, char *argv[]) { void *ptr; int i; pthread_t threads[THREAD_COUNT]; if (argc < 2) return 0; filename = argv[1]; for (i = 0; i < THREAD_COUNT; i++) { if (pthread_create(threads + i, NULL, worker, NULL)) { fprintf(stderr, "Error creating thread\n"); return 0; } } for (i = 0; i < THREAD_COUNT; i++) pthread_join(threads[i], NULL); return 0; } and the following command: 1. run `stress_test /bin/ls` in one windown 2. hack bcc trace.py with the following change: # --- a/tools/trace.py # +++ b/tools/trace.py @@ -513,6 +513,7 @@ BPF_PERF_OUTPUT(%s); __data.tgid = __tgid; __data.pid = __pid; bpf_get_current_comm(&__data.comm, sizeof(__data.comm)); + bpf_send_signal(10); %s %s %s.perf_submit(%s, &__data, sizeof(__data)); 3. in a different window run ./trace.py -p $(pidof stress_test) t:sched:sched_switch The deadlock can be reproduced in our production system. Similar to Song's fix, the fix is to delay sending signal if irqs is disabled to avoid deadlocks involving with rq_lock. With this change, my above stress-test in our production system won't cause deadlock any more. I also implemented a scale-down version of reproducer in the selftest (a subsequent commit). With latest bpf-next, it complains for the following potential deadlock. [ 32.832450] -> #1 (&p->pi_lock){-.-.}: [ 32.833100] _raw_spin_lock_irqsave+0x44/0x80 [ 32.833696] task_rq_lock+0x2c/0xa0 [ 32.834182] task_sched_runtime+0x59/0xd0 [ 32.834721] thread_group_cputime+0x250/0x270 [ 32.835304] thread_group_cputime_adjusted+0x2e/0x70 [ 32.835959] do_task_stat+0x8a7/0xb80 [ 32.836461] proc_single_show+0x51/0xb0 ... [ 32.839512] -> #0 (&(&sighand->siglock)->rlock){....}: [ 32.840275] __lock_acquire+0x1358/0x1a20 [ 32.840826] lock_acquire+0xc7/0x1d0 [ 32.841309] _raw_spin_lock_irqsave+0x44/0x80 [ 32.841916] __lock_task_sighand+0x79/0x160 [ 32.842465] do_send_sig_info+0x35/0x90 [ 32.842977] bpf_send_signal+0xa/0x10 [ 32.843464] bpf_prog_bc13ed9e4d3163e3_send_signal_tp_sched+0x465/0x1000 [ 32.844301] trace_call_bpf+0x115/0x270 [ 32.844809] perf_trace_run_bpf_submit+0x4a/0xc0 [ 32.845411] perf_trace_sched_switch+0x10f/0x180 [ 32.846014] __schedule+0x45d/0x880 [ 32.846483] schedule+0x5f/0xd0 ... [ 32.853148] Chain exists of: [ 32.853148] &(&sighand->siglock)->rlock --> &p->pi_lock --> &rq->lock [ 32.853148] [ 32.854451] Possible unsafe locking scenario: [ 32.854451] [ 32.855173] CPU0 CPU1 [ 32.855745] ---- ---- [ 32.856278] lock(&rq->lock); [ 32.856671] lock(&p->pi_lock); [ 32.857332] lock(&rq->lock); [ 32.857999] lock(&(&sighand->siglock)->rlock); Deadlock happens on CPU0 when it tries to acquire &sighand->siglock but it has been held by CPU1 and CPU1 tries to grab &rq->lock and cannot get it. This is not exactly the callstack in our production environment, but sympotom is similar and both locks are using spin_lock_irqsave() to acquire the lock, and both involves rq_lock. The fix to delay sending signal when irq is disabled also fixed this issue. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200304191104.2796501-1-yhs@fb.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Luca Abeni reported this: | BUG: scheduling while atomic: kworker/u8:2/15203/0x00000003 | CPU: 1 PID: 15203 Comm: kworker/u8:2 Not tainted 4.19.1-rt3 #10 | Call Trace: | rt_spin_lock+0x3f/0x50 | gen6_read32+0x45/0x1d0 [i915] | g4x_get_vblank_counter+0x36/0x40 [i915] | trace_event_raw_event_i915_pipe_update_start+0x7d/0xf0 [i915] The tracing events use trace_i915_pipe_update_start() among other events use functions acquire spin locks. A few trace points use intel_get_crtc_scanline(), others use ->get_vblank_counter() wich also might acquire a sleeping lock. Based on this I don't see any other way than disable trace points on RT. Cc: stable-rt@vger.kernel.org Reported-by: Luca Abeni <lucabe72@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

[ Upstream commit e24c644 ] I compiled with AddressSanitizer and I had these memory leaks while I was using the tep_parse_format function: Direct leak of 28 byte(s) in 4 object(s) allocated from: #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe) #1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985 #2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140 #3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206 #4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291 #5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299 #6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849 #7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161 #8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207 #9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786 #10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285 #11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369 #12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335 #13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389 #14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431 #15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251 #16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284 #17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593 #18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727 #19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048 #20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127 #21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152 #22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252 #23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347 #24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461 #25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673 #26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2) The token variable in the process_dynamic_array_len function is allocated in the read_expect_type function, but is not freed before calling the read_token function. Free the token variable before calling read_token in order to plug the leak. Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b12eea5 ] The evsel->unit borrows a pointer of pmu event or alias instead of owns a string. But tool event (duration_time) passes a result of strdup() caused a leak. It was found by ASAN during metric test: Direct leak of 210 byte(s) in 70 object(s) allocated from: #0 0x7fe366fca0b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5) #1 0x559fbbcc6ea3 in add_event_tool util/parse-events.c:414 #2 0x559fbbcc6ea3 in parse_events_add_tool util/parse-events.c:1414 #3 0x559fbbd8474d in parse_events_parse util/parse-events.y:439 #4 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096 #5 0x559fbbcc95da in __parse_events util/parse-events.c:2141 #6 0x559fbbc28555 in check_parse_id tests/pmu-events.c:406 #7 0x559fbbc28555 in check_parse_id tests/pmu-events.c:393 #8 0x559fbbc28555 in check_parse_cpu tests/pmu-events.c:415 #9 0x559fbbc28555 in test_parsing tests/pmu-events.c:498 #10 0x559fbbc0109b in run_test tests/builtin-test.c:410 #11 0x559fbbc0109b in test_and_print tests/builtin-test.c:440 #12 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695 #13 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807 #14 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #15 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #16 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #17 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #18 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: f0fbb11 ("perf stat: Implement duration_time as a proper event") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d26383d ] The following leaks were detected by ASAN: Indirect leak of 360 byte(s) in 9 object(s) allocated from: #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333 #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59 #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73 #4 0x560578e07045 in test__pmu tests/pmu.c:155 #5 0x560578de109b in run_test tests/builtin-test.c:410 #6 0x560578de109b in test_and_print tests/builtin-test.c:440 #7 0x560578de401a in __cmd_test tests/builtin-test.c:661 #8 0x560578de401a in cmd_test tests/builtin-test.c:807 #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: cff7f95 ("perf tests: Move pmu tests into separate object") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e24c644 ] I compiled with AddressSanitizer and I had these memory leaks while I was using the tep_parse_format function: Direct leak of 28 byte(s) in 4 object(s) allocated from: #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe) #1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985 #2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140 #3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206 #4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291 #5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299 #6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849 #7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161 #8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207 #9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786 #10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285 #11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369 #12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335 #13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389 #14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431 #15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251 #16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284 #17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593 #18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727 #19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048 #20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127 #21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152 #22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252 #23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347 #24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461 #25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673 #26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2) The token variable in the process_dynamic_array_len function is allocated in the read_expect_type function, but is not freed before calling the read_token function. Free the token variable before calling read_token in order to plug the leak. Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d26383d ] The following leaks were detected by ASAN: Indirect leak of 360 byte(s) in 9 object(s) allocated from: #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333 #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59 #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73 #4 0x560578e07045 in test__pmu tests/pmu.c:155 #5 0x560578de109b in run_test tests/builtin-test.c:410 #6 0x560578de109b in test_and_print tests/builtin-test.c:440 #7 0x560578de401a in __cmd_test tests/builtin-test.c:661 #8 0x560578de401a in cmd_test tests/builtin-test.c:807 #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: cff7f95 ("perf tests: Move pmu tests into separate object") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 66d204a upstream. Very sporadically I had test case btrfs/069 from fstests hanging (for years, it is not a recent regression), with the following traces in dmesg/syslog: [162301.160628] BTRFS info (device sdc): dev_replace from /dev/sdd (devid 2) to /dev/sdg started [162301.181196] BTRFS info (device sdc): scrub: finished on devid 4 with status: 0 [162301.287162] BTRFS info (device sdc): dev_replace from /dev/sdd (devid 2) to /dev/sdg finished [162513.513792] INFO: task btrfs-transacti:1356167 blocked for more than 120 seconds. [162513.514318] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.514522] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.514747] task:btrfs-transacti state:D stack: 0 pid:1356167 ppid: 2 flags:0x00004000 [162513.514751] Call Trace: [162513.514761] __schedule+0x5ce/0xd00 [162513.514765] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.514771] schedule+0x46/0xf0 [162513.514844] wait_current_trans+0xde/0x140 [btrfs] [162513.514850] ? finish_wait+0x90/0x90 [162513.514864] start_transaction+0x37c/0x5f0 [btrfs] [162513.514879] transaction_kthread+0xa4/0x170 [btrfs] [162513.514891] ? btrfs_cleanup_transaction+0x660/0x660 [btrfs] [162513.514894] kthread+0x153/0x170 [162513.514897] ? kthread_stop+0x2c0/0x2c0 [162513.514902] ret_from_fork+0x22/0x30 [162513.514916] INFO: task fsstress:1356184 blocked for more than 120 seconds. [162513.515192] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.515431] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.515680] task:fsstress state:D stack: 0 pid:1356184 ppid:1356177 flags:0x00004000 [162513.515682] Call Trace: [162513.515688] __schedule+0x5ce/0xd00 [162513.515691] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.515697] schedule+0x46/0xf0 [162513.515712] wait_current_trans+0xde/0x140 [btrfs] [162513.515716] ? finish_wait+0x90/0x90 [162513.515729] start_transaction+0x37c/0x5f0 [btrfs] [162513.515743] btrfs_attach_transaction_barrier+0x1f/0x50 [btrfs] [162513.515753] btrfs_sync_fs+0x61/0x1c0 [btrfs] [162513.515758] ? __ia32_sys_fdatasync+0x20/0x20 [162513.515761] iterate_supers+0x87/0xf0 [162513.515765] ksys_sync+0x60/0xb0 [162513.515768] __do_sys_sync+0xa/0x10 [162513.515771] do_syscall_64+0x33/0x80 [162513.515774] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.515781] RIP: 0033:0x7f5238f50bd7 [162513.515782] Code: Bad RIP value. [162513.515784] RSP: 002b:00007fff67b978e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a2 [162513.515786] RAX: ffffffffffffffda RBX: 000055b1fad2c560 RCX: 00007f5238f50bd7 [162513.515788] RDX: 00000000ffffffff RSI: 000000000daf0e74 RDI: 000000000000003a [162513.515789] RBP: 0000000000000032 R08: 000000000000000a R09: 00007f5239019be0 [162513.515791] R10: fffffffffffff24f R11: 0000000000000206 R12: 000000000000003a [162513.515792] R13: 00007fff67b97950 R14: 00007fff67b97906 R15: 000055b1fad1a340 [162513.515804] INFO: task fsstress:1356185 blocked for more than 120 seconds. [162513.516064] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.516329] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.516617] task:fsstress state:D stack: 0 pid:1356185 ppid:1356177 flags:0x00000000 [162513.516620] Call Trace: [162513.516625] __schedule+0x5ce/0xd00 [162513.516628] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.516634] schedule+0x46/0xf0 [162513.516647] wait_current_trans+0xde/0x140 [btrfs] [162513.516650] ? finish_wait+0x90/0x90 [162513.516662] start_transaction+0x4d7/0x5f0 [btrfs] [162513.516679] btrfs_setxattr_trans+0x3c/0x100 [btrfs] [162513.516686] __vfs_setxattr+0x66/0x80 [162513.516691] __vfs_setxattr_noperm+0x70/0x200 [162513.516697] vfs_setxattr+0x6b/0x120 [162513.516703] setxattr+0x125/0x240 [162513.516709] ? lock_acquire+0xb1/0x480 [162513.516712] ? mnt_want_write+0x20/0x50 [162513.516721] ? rcu_read_lock_any_held+0x8e/0xb0 [162513.516723] ? preempt_count_add+0x49/0xa0 [162513.516725] ? __sb_start_write+0x19b/0x290 [162513.516727] ? preempt_count_add+0x49/0xa0 [162513.516732] path_setxattr+0xba/0xd0 [162513.516739] __x64_sys_setxattr+0x27/0x30 [162513.516741] do_syscall_64+0x33/0x80 [162513.516743] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.516745] RIP: 0033:0x7f5238f56d5a [162513.516746] Code: Bad RIP value. [162513.516748] RSP: 002b:00007fff67b97868 EFLAGS: 00000202 ORIG_RAX: 00000000000000bc [162513.516750] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f5238f56d5a [162513.516751] RDX: 000055b1fbb0d5a0 RSI: 00007fff67b978a0 RDI: 000055b1fbb0d470 [162513.516753] RBP: 000055b1fbb0d5a0 R08: 0000000000000001 R09: 00007fff67b97700 [162513.516754] R10: 0000000000000004 R11: 0000000000000202 R12: 0000000000000004 [162513.516756] R13: 0000000000000024 R14: 0000000000000001 R15: 00007fff67b978a0 [162513.516767] INFO: task fsstress:1356196 blocked for more than 120 seconds. [162513.517064] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.517365] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.517763] task:fsstress state:D stack: 0 pid:1356196 ppid:1356177 flags:0x00004000 [162513.517780] Call Trace: [162513.517786] __schedule+0x5ce/0xd00 [162513.517789] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.517796] schedule+0x46/0xf0 [162513.517810] wait_current_trans+0xde/0x140 [btrfs] [162513.517814] ? finish_wait+0x90/0x90 [162513.517829] start_transaction+0x37c/0x5f0 [btrfs] [162513.517845] btrfs_attach_transaction_barrier+0x1f/0x50 [btrfs] [162513.517857] btrfs_sync_fs+0x61/0x1c0 [btrfs] [162513.517862] ? __ia32_sys_fdatasync+0x20/0x20 [162513.517865] iterate_supers+0x87/0xf0 [162513.517869] ksys_sync+0x60/0xb0 [162513.517872] __do_sys_sync+0xa/0x10 [162513.517875] do_syscall_64+0x33/0x80 [162513.517878] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.517881] RIP: 0033:0x7f5238f50bd7 [162513.517883] Code: Bad RIP value. [162513.517885] RSP: 002b:00007fff67b978e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a2 [162513.517887] RAX: ffffffffffffffda RBX: 000055b1fad2c560 RCX: 00007f5238f50bd7 [162513.517889] RDX: 0000000000000000 RSI: 000000007660add2 RDI: 0000000000000053 [162513.517891] RBP: 0000000000000032 R08: 0000000000000067 R09: 00007f5239019be0 [162513.517893] R10: fffffffffffff24f R11: 0000000000000206 R12: 0000000000000053 [162513.517895] R13: 00007fff67b97950 R14: 00007fff67b97906 R15: 000055b1fad1a340 [162513.517908] INFO: task fsstress:1356197 blocked for more than 120 seconds. [162513.518298] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.518672] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.519157] task:fsstress state:D stack: 0 pid:1356197 ppid:1356177 flags:0x00000000 [162513.519160] Call Trace: [162513.519165] __schedule+0x5ce/0xd00 [162513.519168] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.519174] schedule+0x46/0xf0 [162513.519190] wait_current_trans+0xde/0x140 [btrfs] [162513.519193] ? finish_wait+0x90/0x90 [162513.519206] start_transaction+0x4d7/0x5f0 [btrfs] [162513.519222] btrfs_create+0x57/0x200 [btrfs] [162513.519230] lookup_open+0x522/0x650 [162513.519246] path_openat+0x2b8/0xa50 [162513.519270] do_filp_open+0x91/0x100 [162513.519275] ? find_held_lock+0x32/0x90 [162513.519280] ? lock_acquired+0x33b/0x470 [162513.519285] ? do_raw_spin_unlock+0x4b/0xc0 [162513.519287] ? _raw_spin_unlock+0x29/0x40 [162513.519295] do_sys_openat2+0x20d/0x2d0 [162513.519300] do_sys_open+0x44/0x80 [162513.519304] do_syscall_64+0x33/0x80 [162513.519307] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.519309] RIP: 0033:0x7f5238f4a903 [162513.519310] Code: Bad RIP value. [162513.519312] RSP: 002b:00007fff67b97758 EFLAGS: 00000246 ORIG_RAX: 0000000000000055 [162513.519314] RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007f5238f4a903 [162513.519316] RDX: 0000000000000000 RSI: 00000000000001b6 RDI: 000055b1fbb0d470 [162513.519317] RBP: 00007fff67b978c0 R08: 0000000000000001 R09: 0000000000000002 [162513.519319] R10: 00007fff67b974f7 R11: 0000000000000246 R12: 0000000000000013 [162513.519320] R13: 00000000000001b6 R14: 00007fff67b97906 R15: 000055b1fad1c620 [162513.519332] INFO: task btrfs:1356211 blocked for more than 120 seconds. [162513.519727] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.520115] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.520508] task:btrfs state:D stack: 0 pid:1356211 ppid:1356178 flags:0x00004002 [162513.520511] Call Trace: [162513.520516] __schedule+0x5ce/0xd00 [162513.520519] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.520525] schedule+0x46/0xf0 [162513.520544] btrfs_scrub_pause+0x11f/0x180 [btrfs] [162513.520548] ? finish_wait+0x90/0x90 [162513.520562] btrfs_commit_transaction+0x45a/0xc30 [btrfs] [162513.520574] ? start_transaction+0xe0/0x5f0 [btrfs] [162513.520596] btrfs_dev_replace_finishing+0x6d8/0x711 [btrfs] [162513.520619] btrfs_dev_replace_by_ioctl.cold+0x1cc/0x1fd [btrfs] [162513.520639] btrfs_ioctl+0x2a25/0x36f0 [btrfs] [162513.520643] ? do_sigaction+0xf3/0x240 [162513.520645] ? find_held_lock+0x32/0x90 [162513.520648] ? do_sigaction+0xf3/0x240 [162513.520651] ? lock_acquired+0x33b/0x470 [162513.520655] ? _raw_spin_unlock_irq+0x24/0x50 [162513.520657] ? lockdep_hardirqs_on+0x7d/0x100 [162513.520660] ? _raw_spin_unlock_irq+0x35/0x50 [162513.520662] ? do_sigaction+0xf3/0x240 [162513.520671] ? __x64_sys_ioctl+0x83/0xb0 [162513.520672] __x64_sys_ioctl+0x83/0xb0 [162513.520677] do_syscall_64+0x33/0x80 [162513.520679] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.520681] RIP: 0033:0x7fc3cd307d87 [162513.520682] Code: Bad RIP value. [162513.520684] RSP: 002b:00007ffe30a56bb8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [162513.520686] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fc3cd307d87 [162513.520687] RDX: 00007ffe30a57a30 RSI: 00000000ca289435 RDI: 0000000000000003 [162513.520689] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [162513.520690] R10: 0000000000000008 R11: 0000000000000202 R12: 0000000000000003 [162513.520692] R13: 0000557323a212e0 R14: 00007ffe30a5a520 R15: 0000000000000001 [162513.520703] Showing all locks held in the system: [162513.520712] 1 lock held by khungtaskd/54: [162513.520713] #0: ffffffffb40a91a0 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x15/0x197 [162513.520728] 1 lock held by in:imklog/596: [162513.520729] #0: ffff8f3f0d781400 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0x4d/0x60 [162513.520782] 1 lock held by btrfs-transacti/1356167: [162513.520784] #0: ffff8f3d810cc848 (&fs_info->transaction_kthread_mutex){+.+.}-{3:3}, at: transaction_kthread+0x4a/0x170 [btrfs] [162513.520798] 1 lock held by btrfs/1356190: [162513.520800] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write_file+0x22/0x60 [162513.520805] 1 lock held by fsstress/1356184: [162513.520806] #0: ffff8f3d576440e8 (&type->s_umount_key#62){++++}-{3:3}, at: iterate_supers+0x6f/0xf0 [162513.520811] 3 locks held by fsstress/1356185: [162513.520812] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write+0x20/0x50 [162513.520815] #1: ffff8f3d80a650b8 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: vfs_setxattr+0x50/0x120 [162513.520820] #2: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs] [162513.520833] 1 lock held by fsstress/1356196: [162513.520834] #0: ffff8f3d576440e8 (&type->s_umount_key#62){++++}-{3:3}, at: iterate_supers+0x6f/0xf0 [162513.520838] 3 locks held by fsstress/1356197: [162513.520839] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write+0x20/0x50 [162513.520843] #1: ffff8f3d506465e8 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: path_openat+0x2a7/0xa50 [162513.520846] #2: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs] [162513.520858] 2 locks held by btrfs/1356211: [162513.520859] #0: ffff8f3d810cde30 (&fs_info->dev_replace.lock_finishing_cancel_unmount){+.+.}-{3:3}, at: btrfs_dev_replace_finishing+0x52/0x711 [btrfs] [162513.520877] #1: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs] This was weird because the stack traces show that a transaction commit, triggered by a device replace operation, is blocking trying to pause any running scrubs but there are no stack traces of blocked tasks doing a scrub. After poking around with drgn, I noticed there was a scrub task that was constantly running and blocking for shorts periods of time: >>> t = find_task(prog, 1356190) >>> prog.stack_trace(t) #0 __schedule+0x5ce/0xcfc #1 schedule+0x46/0xe4 #2 schedule_timeout+0x1df/0x475 #3 btrfs_reada_wait+0xda/0x132 #4 scrub_stripe+0x2a8/0x112f #5 scrub_chunk+0xcd/0x134 #6 scrub_enumerate_chunks+0x29e/0x5ee #7 btrfs_scrub_dev+0x2d5/0x91b #8 btrfs_ioctl+0x7f5/0x36e7 #9 __x64_sys_ioctl+0x83/0xb0 #10 do_syscall_64+0x33/0x77 #11 entry_SYSCALL_64+0x7c/0x156 Which corresponds to: int btrfs_reada_wait(void *handle) { struct reada_control *rc = handle; struct btrfs_fs_info *fs_info = rc->fs_info; while (atomic_read(&rc->elems)) { if (!atomic_read(&fs_info->reada_works_cnt)) reada_start_machine(fs_info); wait_event_timeout(rc->wait, atomic_read(&rc->elems) == 0, (HZ + 9) / 10); } (...) So the counter "rc->elems" was set to 1 and never decreased to 0, causing the scrub task to loop forever in that function. Then I used the following script for drgn to check the readahead requests: $ cat dump_reada.py import sys import drgn from drgn import NULL, Object, cast, container_of, execscript, \ reinterpret, sizeof from drgn.helpers.linux import * mnt_path = b"/home/fdmanana/btrfs-tests/scratch_1" mnt = None for mnt in for_each_mount(prog, dst = mnt_path): pass if mnt is None: sys.stderr.write(f'Error: mount point {mnt_path} not found\n') sys.exit(1) fs_info = cast('struct btrfs_fs_info *', mnt.mnt.mnt_sb.s_fs_info) def dump_re(re): nzones = re.nzones.value_() print(f're at {hex(re.value_())}') print(f'\t logical {re.logical.value_()}') print(f'\t refcnt {re.refcnt.value_()}') print(f'\t nzones {nzones}') for i in range(nzones): dev = re.zones[i].device name = dev.name.str.string_() print(f'\t\t dev id {dev.devid.value_()} name {name}') print() for _, e in radix_tree_for_each(fs_info.reada_tree): re = cast('struct reada_extent *', e) dump_re(re) $ drgn dump_reada.py re at 0xffff8f3da9d25ad8 logical 38928384 refcnt 1 nzones 1 dev id 0 name b'/dev/sdd' $ So there was one readahead extent with a single zone corresponding to the source device of that last device replace operation logged in dmesg/syslog. Also the ID of that zone's device was 0 which is a special value set in the source device of a device replace operation when the operation finishes (constant BTRFS_DEV_REPLACE_DEVID set at btrfs_dev_replace_finishing()), confirming again that device /dev/sdd was the source of a device replace operation. Normally there should be as many zones in the readahead extent as there are devices, and I wasn't expecting the extent to be in a block group with a 'single' profile, so I went and confirmed with the following drgn script that there weren't any single profile block groups: $ cat dump_block_groups.py import sys import drgn from drgn import NULL, Object, cast, container_of, execscript, \ reinterpret, sizeof from drgn.helpers.linux import * mnt_path = b"/home/fdmanana/btrfs-tests/scratch_1" mnt = None for mnt in for_each_mount(prog, dst = mnt_path): pass if mnt is None: sys.stderr.write(f'Error: mount point {mnt_path} not found\n') sys.exit(1) fs_info = cast('struct btrfs_fs_info *', mnt.mnt.mnt_sb.s_fs_info) BTRFS_BLOCK_GROUP_DATA = (1 << 0) BTRFS_BLOCK_GROUP_SYSTEM = (1 << 1) BTRFS_BLOCK_GROUP_METADATA = (1 << 2) BTRFS_BLOCK_GROUP_RAID0 = (1 << 3) BTRFS_BLOCK_GROUP_RAID1 = (1 << 4) BTRFS_BLOCK_GROUP_DUP = (1 << 5) BTRFS_BLOCK_GROUP_RAID10 = (1 << 6) BTRFS_BLOCK_GROUP_RAID5 = (1 << 7) BTRFS_BLOCK_GROUP_RAID6 = (1 << 8) BTRFS_BLOCK_GROUP_RAID1C3 = (1 << 9) BTRFS_BLOCK_GROUP_RAID1C4 = (1 << 10) def bg_flags_string(bg): flags = bg.flags.value_() ret = '' if flags & BTRFS_BLOCK_GROUP_DATA: ret = 'data' if flags & BTRFS_BLOCK_GROUP_METADATA: if len(ret) > 0: ret += '|' ret += 'meta' if flags & BTRFS_BLOCK_GROUP_SYSTEM: if len(ret) > 0: ret += '|' ret += 'system' if flags & BTRFS_BLOCK_GROUP_RAID0: ret += ' raid0' elif flags & BTRFS_BLOCK_GROUP_RAID1: ret += ' raid1' elif flags & BTRFS_BLOCK_GROUP_DUP: ret += ' dup' elif flags & BTRFS_BLOCK_GROUP_RAID10: ret += ' raid10' elif flags & BTRFS_BLOCK_GROUP_RAID5: ret += ' raid5' elif flags & BTRFS_BLOCK_GROUP_RAID6: ret += ' raid6' elif flags & BTRFS_BLOCK_GROUP_RAID1C3: ret += ' raid1c3' elif flags & BTRFS_BLOCK_GROUP_RAID1C4: ret += ' raid1c4' else: ret += ' single' return ret def dump_bg(bg): print() print(f'block group at {hex(bg.value_())}') print(f'\t start {bg.start.value_()} length {bg.length.value_()}') print(f'\t flags {bg.flags.value_()} - {bg_flags_string(bg)}') bg_root = fs_info.block_group_cache_tree.address_of_() for bg in rbtree_inorder_for_each_entry('struct btrfs_block_group', bg_root, 'cache_node'): dump_bg(bg) $ drgn dump_block_groups.py block group at 0xffff8f3d673b0400 start 22020096 length 16777216 flags 258 - system raid6 block group at 0xffff8f3d53ddb400 start 38797312 length 536870912 flags 260 - meta raid6 block group at 0xffff8f3d5f4d9c00 start 575668224 length 2147483648 flags 257 - data raid6 block group at 0xffff8f3d08189000 start 2723151872 length 67108864 flags 258 - system raid6 block group at 0xffff8f3db70ff000 start 2790260736 length 1073741824 flags 260 - meta raid6 block group at 0xffff8f3d5f4dd800 start 3864002560 length 67108864 flags 258 - system raid6 block group at 0xffff8f3d67037000 start 3931111424 length 2147483648 flags 257 - data raid6 $ So there were only 2 reasons left for having a readahead extent with a single zone: reada_find_zone(), called when creating a readahead extent, returned NULL either because we failed to find the corresponding block group or because a memory allocation failed. With some additional and custom tracing I figured out that on every further ocurrence of the problem the block group had just been deleted when we were looping to create the zones for the readahead extent (at reada_find_extent()), so we ended up with only one zone in the readahead extent, corresponding to a device that ends up getting replaced. So after figuring that out it became obvious why the hang happens: 1) Task A starts a scrub on any device of the filesystem, except for device /dev/sdd; 2) Task B starts a device replace with /dev/sdd as the source device; 3) Task A calls btrfs_reada_add() from scrub_stripe() and it is currently starting to scrub a stripe from block group X. This call to btrfs_reada_add() is the one for the extent tree. When btrfs_reada_add() calls reada_add_block(), it passes the logical address of the extent tree's root node as its 'logical' argument - a value of 38928384; 4) Task A then enters reada_find_extent(), called from reada_add_block(). It finds there isn't any existing readahead extent for the logical address 38928384, so it proceeds to the path of creating a new one. It calls btrfs_map_block() to find out which stripes exist for the block group X. On the first iteration of the for loop that iterates over the stripes, it finds the stripe for device /dev/sdd, so it creates one zone for that device and adds it to the readahead extent. Before getting into the second iteration of the loop, the cleanup kthread deletes block group X because it was empty. So in the iterations for the remaining stripes it does not add more zones to the readahead extent, because the calls to reada_find_zone() returned NULL because they couldn't find block group X anymore. As a result the new readahead extent has a single zone, corresponding to the device /dev/sdd; 4) Before task A returns to btrfs_reada_add() and queues the readahead job for the readahead work queue, task B finishes the device replace and at btrfs_dev_replace_finishing() swaps the device /dev/sdd with the new device /dev/sdg; 5) Task A returns to reada_add_block(), which increments the counter "->elems" of the reada_control structure allocated at btrfs_reada_add(). Then it returns back to btrfs_reada_add() and calls reada_start_machine(). This queues a job in the readahead work queue to run the function reada_start_machine_worker(), which calls __reada_start_machine(). At __reada_start_machine() we take the device list mutex and for each device found in the current device list, we call reada_start_machine_dev() to start the readahead work. However at this point the device /dev/sdd was already freed and is not in the device list anymore. This means the corresponding readahead for the extent at 38928384 is never started, and therefore the "->elems" counter of the reada_control structure allocated at btrfs_reada_add() never goes down to 0, causing the call to btrfs_reada_wait(), done by the scrub task, to wait forever. Note that the readahead request can be made either after the device replace started or before it started, however in pratice it is very unlikely that a device replace is able to start after a readahead request is made and is able to complete before the readahead request completes - maybe only on a very small and nearly empty filesystem. This hang however is not the only problem we can have with readahead and device removals. When the readahead extent has other zones other than the one corresponding to the device that is being removed (either by a device replace or a device remove operation), we risk having a use-after-free on the device when dropping the last reference of the readahead extent. For example if we create a readahead extent with two zones, one for the device /dev/sdd and one for the device /dev/sde: 1) Before the readahead worker starts, the device /dev/sdd is removed, and the corresponding btrfs_device structure is freed. However the readahead extent still has the zone pointing to the device structure; 2) When the readahead worker starts, it only finds device /dev/sde in the current device list of the filesystem; 3) It starts the readahead work, at reada_start_machine_dev(), using the device /dev/sde; 4) Then when it finishes reading the extent from device /dev/sde, it calls __readahead_hook() which ends up dropping the last reference on the readahead extent through the last call to reada_extent_put(); 5) At reada_extent_put() it iterates over each zone of the readahead extent and attempts to delete an element from the device's 'reada_extents' radix tree, resulting in a use-after-free, as the device pointer of the zone for /dev/sdd is now stale. We can also access the device after dropping the last reference of a zone, through reada_zone_release(), also called by reada_extent_put(). And a device remove suffers the same problem, however since it shrinks the device size down to zero before removing the device, it is very unlikely to still have readahead requests not completed by the time we free the device, the only possibility is if the device has a very little space allocated. While the hang problem is exclusive to scrub, since it is currently the only user of btrfs_reada_add() and btrfs_reada_wait(), the use-after-free problem affects any path that triggers readhead, which includes btree_readahead_hook() and __readahead_hook() (a readahead worker can trigger readahed for the children of a node) for example - any path that ends up calling reada_add_block() can trigger the use-after-free after a device is removed. So fix this by waiting for any readahead requests for a device to complete before removing a device, ensuring that while waiting for existing ones no new ones can be made. This problem has been around for a very long time - the readahead code was added in 2011, device remove exists since 2008 and device replace was introduced in 2013, hard to pick a specific commit for a git Fixes tag. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d26383d ] The following leaks were detected by ASAN: Indirect leak of 360 byte(s) in 9 object(s) allocated from: #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333 #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59 #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73 #4 0x560578e07045 in test__pmu tests/pmu.c:155 #5 0x560578de109b in run_test tests/builtin-test.c:410 #6 0x560578de109b in test_and_print tests/builtin-test.c:440 #7 0x560578de401a in __cmd_test tests/builtin-test.c:661 #8 0x560578de401a in cmd_test tests/builtin-test.c:807 #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: cff7f95 ("perf tests: Move pmu tests into separate object") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

Luca Abeni reported this: | BUG: scheduling while atomic: kworker/u8:2/15203/0x00000003 | CPU: 1 PID: 15203 Comm: kworker/u8:2 Not tainted 4.19.1-rt3 #10 | Call Trace: | rt_spin_lock+0x3f/0x50 | gen6_read32+0x45/0x1d0 [i915] | g4x_get_vblank_counter+0x36/0x40 [i915] | trace_event_raw_event_i915_pipe_update_start+0x7d/0xf0 [i915] The tracing events use trace_i915_pipe_update_start() among other events use functions acquire spin locks. A few trace points use intel_get_crtc_scanline(), others use ->get_vblank_counter() wich also might acquire a sleeping lock. Based on this I don't see any other way than disable trace points on RT. Cc: stable-rt@vger.kernel.org Reported-by: Luca Abeni <lucabe72@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

…g system shutdown [ Upstream commit 45a2702 ] During Coldboot stress tests, system encountered the following panic. Panic logs depicts rt5682_i2c_shutdown() happened first and then later jack detect handler workqueue function triggered. This situation causes panic as rt5682_i2c_shutdown() resets codec. Fix this panic by cancelling all jack detection delayed work. Panic log: [ 20.936124] sof_pci_shutdown [ 20.940248] snd_sof_device_shutdown [ 20.945023] snd_sof_shutdown [ 21.126849] rt5682_i2c_shutdown [ 21.286053] rt5682_jack_detect_handler [ 21.291235] BUG: kernel NULL pointer dereference, address: 000000000000037c [ 21.299302] #PF: supervisor read access in kernel mode [ 21.305254] #PF: error_code(0x0000) - not-present page [ 21.311218] PGD 0 P4D 0 [ 21.314155] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 21.319206] CPU: 2 PID: 123 Comm: kworker/2:3 Tainted: G U 5.4.68 #10 [ 21.333687] ACPI: Preparing to enter system sleep state S5 [ 21.337669] Workqueue: events_power_efficient rt5682_jack_detect_handler [snd_soc_rt5682] [ 21.337671] RIP: 0010:rt5682_jack_detect_handler+0x6c/0x279 [snd_soc_rt5682] Fixes: a50067d ('ASoC: rt5682: split i2c driver into separate module') Signed-off-by: Jairaj Arava <jairaj.arava@intel.com> Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> Reviewed-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20210205171428.2344210-1-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c5c97ca ] The ubsan reported the following error. It was because sample's raw data missed u32 padding at the end. So it broke the alignment of the array after it. The raw data contains an u32 size prefix so the data size should have an u32 padding after 8-byte aligned data. 27: Sample parsing :util/synthetic-events.c:1539:4: runtime error: store to misaligned address 0x62100006b9bc for type '__u64' (aka 'unsigned long long'), which requires 8 byte alignment 0x62100006b9bc: note: pointer points here 00 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ #0 0x561532a9fc96 in perf_event__synthesize_sample util/synthetic-events.c:1539:13 #1 0x5615327f4a4f in do_test tests/sample-parsing.c:284:8 #2 0x5615327f3f50 in test__sample_parsing tests/sample-parsing.c:381:9 #3 0x56153279d3a1 in run_test tests/builtin-test.c:424:9 #4 0x56153279c836 in test_and_print tests/builtin-test.c:454:9 #5 0x56153279b7eb in __cmd_test tests/builtin-test.c:675:4 #6 0x56153279abf0 in cmd_test tests/builtin-test.c:821:9 #7 0x56153264e796 in run_builtin perf.c:312:11 #8 0x56153264cf03 in handle_internal_command perf.c:364:8 #9 0x56153264e47d in run_argv perf.c:408:2 #10 0x56153264c9a9 in main perf.c:538:3 #11 0x7f137ab6fbbc in __libc_start_main (/lib64/libc.so.6+0x38bbc) #12 0x561532596828 in _start ... SUMMARY: UndefinedBehaviorSanitizer: misaligned-pointer-use util/synthetic-events.c:1539:4 in Fixes: 045f8cd ("perf tests: Add a sample parsing test") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210214091638.519643-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 4d14c5c upstream Calling btrfs_qgroup_reserve_meta_prealloc from btrfs_delayed_inode_reserve_metadata can result in flushing delalloc while holding a transaction and delayed node locks. This is deadlock prone. In the past multiple commits: * ae5e070 ("btrfs: qgroup: don't try to wait flushing if we're already holding a transaction") * 6f23277 ("btrfs: qgroup: don't commit transaction when we already hold the handle") Tried to solve various aspects of this but this was always a whack-a-mole game. Unfortunately those 2 fixes don't solve a deadlock scenario involving btrfs_delayed_node::mutex. Namely, one thread can call btrfs_dirty_inode as a result of reading a file and modifying its atime: PID: 6963 TASK: ffff8c7f3f94c000 CPU: 2 COMMAND: "test" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_timeout at ffffffffa52a1bdd #3 wait_for_completion at ffffffffa529eeea <-- sleeps with delayed node mutex held #4 start_delalloc_inodes at ffffffffc0380db5 #5 btrfs_start_delalloc_snapshot at ffffffffc0393836 #6 try_flush_qgroup at ffffffffc03f04b2 #7 __btrfs_qgroup_reserve_meta at ffffffffc03f5bb6 <-- tries to reserve space and starts delalloc inodes. #8 btrfs_delayed_update_inode at ffffffffc03e31aa <-- acquires delayed node mutex #9 btrfs_update_inode at ffffffffc0385ba8 #10 btrfs_dirty_inode at ffffffffc038627b <-- TRANSACTIION OPENED #11 touch_atime at ffffffffa4cf0000 #12 generic_file_read_iter at ffffffffa4c1f123 #13 new_sync_read at ffffffffa4ccdc8a #14 vfs_read at ffffffffa4cd0849 #15 ksys_read at ffffffffa4cd0bd1 #16 do_syscall_64 at ffffffffa4a052eb #17 entry_SYSCALL_64_after_hwframe at ffffffffa540008c This will cause an asynchronous work to flush the delalloc inodes to happen which can try to acquire the same delayed_node mutex: PID: 455 TASK: ffff8c8085fa4000 CPU: 5 COMMAND: "kworker/u16:30" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_preempt_disabled at ffffffffa529e80a #3 __mutex_lock at ffffffffa529fdcb <-- goes to sleep, never wakes up. #4 btrfs_delayed_update_inode at ffffffffc03e3143 <-- tries to acquire the mutex #5 btrfs_update_inode at ffffffffc0385ba8 <-- this is the same inode that pid 6963 is holding #6 cow_file_range_inline.constprop.78 at ffffffffc0386be7 #7 cow_file_range at ffffffffc03879c1 #8 btrfs_run_delalloc_range at ffffffffc038894c #9 writepage_delalloc at ffffffffc03a3c8f #10 __extent_writepage at ffffffffc03a4c01 #11 extent_write_cache_pages at ffffffffc03a500b #12 extent_writepages at ffffffffc03a6de2 #13 do_writepages at ffffffffa4c277eb #14 __filemap_fdatawrite_range at ffffffffa4c1e5bb #15 btrfs_run_delalloc_work at ffffffffc0380987 <-- starts running delayed nodes #16 normal_work_helper at ffffffffc03b706c #17 process_one_work at ffffffffa4aba4e4 #18 worker_thread at ffffffffa4aba6fd #19 kthread at ffffffffa4ac0a3d #20 ret_from_fork at ffffffffa54001ff To fully address those cases the complete fix is to never issue any flushing while holding the transaction or the delayed node lock. This patch achieves it by calling qgroup_reserve_meta directly which will either succeed without flushing or will fail and return -EDQUOT. In the latter case that return value is going to be propagated to btrfs_dirty_inode which will fallback to start a new transaction. That's fine as the majority of time we expect the inode will have BTRFS_DELAYED_NODE_INODE_DIRTY flag set which will result in directly copying the in-memory state. Fixes: c53e965 ("btrfs: qgroup: try to flush qgroup space when we get -EDQUOT") CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> [sudip: adjust context] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f06391c upstream. [ 6684.493350] Unable to handle kernel paging request at virtual address ffff800011c5b0f0 [ 6684.498531] mmc0: card 0001 removed [ 6684.501556] Mem abort info: [ 6684.509681] ESR = 0x96000047 [ 6684.512786] EC = 0x25: DABT (current EL), IL = 32 bits [ 6684.518394] SET = 0, FnV = 0 [ 6684.521707] EA = 0, S1PTW = 0 [ 6684.524998] Data abort info: [ 6684.528236] ISV = 0, ISS = 0x00000047 [ 6684.532986] CM = 0, WnR = 1 [ 6684.536129] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000081b22000 [ 6684.543923] [ffff800011c5b0f0] pgd=00000000bffff003, p4d=00000000bffff003, pud=00000000bfffe003, pmd=00000000900e1003, pte=0000000000000000 [ 6684.557915] Internal error: Oops: 96000047 [#1] PREEMPT SMP [ 6684.564240] Modules linked in: sdhci_esdhc_imx(-) sdhci_pltfm sdhci cqhci mmc_block mmc_core fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine rng_core authenc libdes crct10dif_ce flexcan can_dev caam error [last unloaded: mmc_core] [ 6684.587281] CPU: 0 PID: 79138 Comm: kworker/0:3H Not tainted 5.10.9-01410-g3ba33182767b-dirty #10 [ 6684.596160] Hardware name: Freescale i.MX8DXL EVK (DT) [ 6684.601320] Workqueue: kblockd blk_mq_run_work_fn [ 6684.606094] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--) [ 6684.612286] pc : cqhci_request+0x148/0x4e8 [cqhci] ^GMessage from syslogd@ at Thu Jan 1 01:51:24 1970 ...[ 6684.617085] lr : cqhci_request+0x314/0x4e8 [cqhci] [ 6684.626734] sp : ffff80001243b9f0 [ 6684.630049] x29: ffff80001243b9f0 x28: ffff00002c3dd000 [ 6684.635367] x27: 0000000000000001 x26: 0000000000000001 [ 6684.640690] x25: ffff00002c451000 x24: 000000000000000f [ 6684.646007] x23: ffff000017e71c80 x22: ffff00002c451000 [ 6684.651326] x21: ffff00002c0f3550 x20: ffff00002c0f3550 [ 6684.656651] x19: ffff000017d46880 x18: ffff00002cea1500 [ 6684.661977] x17: 0000000000000000 x16: 0000000000000000 [ 6684.667294] x15: 000001ee628e3ed1 x14: 0000000000000278 [ 6684.672610] x13: 0000000000000001 x12: 0000000000000001 [ 6684.677927] x11: 0000000000000000 x10: 0000000000000000 [ 6684.683243] x9 : 000000000000002b x8 : 0000000000001000 [ 6684.688560] x7 : 0000000000000010 x6 : ffff00002c0f3678 [ 6684.693886] x5 : 000000000000000f x4 : ffff800011c5b000 [ 6684.699211] x3 : 000000000002d988 x2 : 0000000000000008 [ 6684.704537] x1 : 00000000000000f0 x0 : 0002d9880008102f [ 6684.709854] Call trace: [ 6684.712313] cqhci_request+0x148/0x4e8 [cqhci] [ 6684.716803] mmc_cqe_start_req+0x58/0x68 [mmc_core] [ 6684.721698] mmc_blk_mq_issue_rq+0x460/0x810 [mmc_block] [ 6684.727018] mmc_mq_queue_rq+0x118/0x2b0 [mmc_block] The problem occurs when cqhci_request() get called after cqhci_disable() as it leads to access of allocated memory that has already been freed. Let's fix the problem by calling cqhci_disable() a bit later in the remove path. Signed-off-by: Frank Li <Frank.Li@nxp.com> Diagnosed-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20210303174248.542175-1-Frank.Li@nxp.com Fixes: f690f44 ("mmc: mmc: Enable CQE's") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 41d5854 upstream. I got several memory leak reports from Asan with a simple command. It was because VDSO is not released due to the refcount. Like in __dsos_addnew_id(), it should put the refcount after adding to the list. $ perf record true [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ] ================================================================= ==692599==ERROR: LeakSanitizer: detected memory leaks Direct leak of 439 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce4aa8ee in dso__new_id util/dso.c:1256 #2 0x559bce59245a in __machine__addnew_vdso util/vdso.c:132 #3 0x559bce59245a in machine__findnew_vdso util/vdso.c:347 #4 0x559bce50826c in map__new util/map.c:175 #5 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #6 0x559bce512f6b in machines__deliver_event util/session.c:1481 #7 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #8 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #9 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #10 0x559bce519bea in __perf_session__process_events util/session.c:2268 #11 0x559bce519bea in perf_session__process_events util/session.c:2297 #12 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 #13 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 #14 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 #15 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 #16 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #17 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #18 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #19 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #20 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 Indirect leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce520907 in nsinfo__copy util/namespaces.c:169 #2 0x559bce50821b in map__new util/map.c:168 #3 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #4 0x559bce512f6b in machines__deliver_event util/session.c:1481 #5 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #6 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #7 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #8 0x559bce519bea in __perf_session__process_events util/session.c:2268 #9 0x559bce519bea in perf_session__process_events util/session.c:2297 #10 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 #11 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 #12 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 #13 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 #14 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #15 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #16 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #17 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #18 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s). Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210315045641.700430-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Luca Abeni reported this: | BUG: scheduling while atomic: kworker/u8:2/15203/0x00000003 | CPU: 1 PID: 15203 Comm: kworker/u8:2 Not tainted 4.19.1-rt3 #10 | Call Trace: | rt_spin_lock+0x3f/0x50 | gen6_read32+0x45/0x1d0 [i915] | g4x_get_vblank_counter+0x36/0x40 [i915] | trace_event_raw_event_i915_pipe_update_start+0x7d/0xf0 [i915] The tracing events use trace_i915_pipe_update_start() among other events use functions acquire spin locks. A few trace points use intel_get_crtc_scanline(), others use ->get_vblank_counter() wich also might acquire a sleeping lock. Based on this I don't see any other way than disable trace points on RT. Cc: stable-rt@vger.kernel.org Reported-by: Luca Abeni <lucabe72@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

commit 57f0ff0 upstream. It's later supposed to be either a correct address or NULL. Without the initialization, it may contain an undefined value which results in the following segmentation fault: # perf top --sort comm -g --ignore-callees=do_idle terminates with: #0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6 #1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6 #2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489 #3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564 #4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420, sample_self=sample_self@entry=true) at util/hist.c:657 #5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0, sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288 #6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38) at util/hist.c:1056 #7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056 #8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0) at util/hist.c:1231 #9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0) at builtin-top.c:842 #10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202 #11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244 #12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323 #13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339 #14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341 #15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339 #16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114 #17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0 #18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6 If you look at the frame #2, the code is: 488 if (he->srcline) { 489 he->srcline = strdup(he->srcline); 490 if (he->srcline == NULL) 491 goto err_rawdata; 492 } If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish), it gets strdupped and strdupping a rubbish random string causes the problem. Also, if you look at the commit 1fb7d06, it adds the srcline property into the struct, but not initializing it everywhere needed. Committer notes: Now I see, when using --ignore-callees=do_idle we end up here at line 2189 in add_callchain_ip(): 2181 if (al.sym != NULL) { 2182 if (perf_hpp_list.parent && !*parent && 2183 symbol__match_regex(al.sym, &parent_regex)) 2184 *parent = al.sym; 2185 else if (have_ignore_callees && root_al && 2186 symbol__match_regex(al.sym, &ignore_callees_regex)) { 2187 /* Treat this symbol as the root, 2188 forgetting its callees. */ 2189 *root_al = al; 2190 callchain_cursor_reset(cursor); 2191 } 2192 } And the al that doesn't have the ->srcline field initialized will be copied to the root_al, so then, back to: 1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al, 1212 int max_stack_depth, void *arg) 1213 { 1214 int err, err2; 1215 struct map *alm = NULL; 1216 1217 if (al) 1218 alm = map__get(al->map); 1219 1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent, 1221 iter->evsel, al, max_stack_depth); 1222 if (err) { 1223 map__put(alm); 1224 return err; 1225 } 1226 1227 err = iter->ops->prepare_entry(iter, al); 1228 if (err) 1229 goto out; 1230 1231 err = iter->ops->add_single_entry(iter, al); 1232 if (err) 1233 goto out; 1234 That al at line 1221 is what hist_entry_iter__add() (called from sample__resolve_callchain()) saw as 'root_al', and then: iter->ops->add_single_entry(iter, al); will go on with al->srcline with a bogus value, I'll add the above sequence to the cset and apply, thanks! Signed-off-by: Michael Petlan <mpetlan@redhat.com> CC: Milian Wolff <milian.wolff@kdab.com> Cc: Jiri Olsa <jolsa@redhat.com> Fixes: 1fb7d06 ("perf report Use srcline from callchain for hist entries") Link: https //lore.kernel.org/r/20210719145332.29747-1-mpetlan@redhat.com Reported-by: Juri Lelli <jlelli@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 767c94c ] With CONFIG_LOCKDEP=y and CONFIG_DEBUG_SPINLOCK=y, lockdep reports below warning: [ 166.059415] ============================================ [ 166.059416] WARNING: possible recursive locking detected [ 166.059418] 5.15.0-wt-ath+ #10 Tainted: G W O [ 166.059420] -------------------------------------------- [ 166.059421] kworker/0:2/116 is trying to acquire lock: [ 166.059423] ffff9905f2083160 (&srng->lock){+.-.}-{2:2}, at: ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k] [ 166.059440] but task is already holding lock: [ 166.059442] ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k] [ 166.059491] other info that might help us debug this: [ 166.059492] Possible unsafe locking scenario: [ 166.059493] CPU0 [ 166.059494] ---- [ 166.059495] lock(&srng->lock); [ 166.059498] lock(&srng->lock); [ 166.059500] *** DEADLOCK *** [ 166.059501] May be due to missing lock nesting notation [ 166.059502] 3 locks held by kworker/0:2/116: [ 166.059504] #0: ffff9905c0081548 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f6/0x660 [ 166.059511] #1: ffff9d2400a5fe68 ((debug_obj_work).work){+.+.}-{0:0}, at: process_one_work+0x1f6/0x660 [ 166.059517] #2: ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k] [ 166.059532] stack backtrace: [ 166.059534] CPU: 0 PID: 116 Comm: kworker/0:2 Kdump: loaded Tainted: G W O 5.15.0-wt-ath+ #10 [ 166.059537] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0059.2019.1112.1124 11/12/2019 [ 166.059539] Workqueue: events free_obj_work [ 166.059543] Call Trace: [ 166.059545] <IRQ> [ 166.059547] dump_stack_lvl+0x56/0x7b [ 166.059552] __lock_acquire+0xb9a/0x1a50 [ 166.059556] lock_acquire+0x1e2/0x330 [ 166.059560] ? ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k] [ 166.059571] _raw_spin_lock_bh+0x33/0x70 [ 166.059574] ? ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k] [ 166.059584] ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k] [ 166.059594] ath11k_dp_tx_send_reo_cmd+0x3f/0x130 [ath11k] [ 166.059605] ath11k_dp_rx_tid_del_func+0x221/0x370 [ath11k] [ 166.059618] ath11k_dp_process_reo_status+0x22f/0x2d0 [ath11k] [ 166.059632] ? ath11k_dp_service_srng+0x2ea/0x2f0 [ath11k] [ 166.059643] ath11k_dp_service_srng+0x2ea/0x2f0 [ath11k] [ 166.059655] ath11k_pci_ext_grp_napi_poll+0x1c/0x70 [ath11k_pci] [ 166.059659] __napi_poll+0x28/0x230 [ 166.059664] net_rx_action+0x285/0x310 [ 166.059668] __do_softirq+0xe6/0x4d2 [ 166.059672] irq_exit_rcu+0xd2/0xf0 [ 166.059675] common_interrupt+0xa5/0xc0 [ 166.059678] </IRQ> [ 166.059679] <TASK> [ 166.059680] asm_common_interrupt+0x1e/0x40 [ 166.059683] RIP: 0010:_raw_spin_unlock_irqrestore+0x38/0x70 [ 166.059686] Code: 83 c7 18 e8 2a 95 43 ff 48 89 ef e8 22 d2 43 ff 81 e3 00 02 00 00 75 25 9c 58 f6 c4 02 75 2d 48 85 db 74 01 fb bf 01 00 00 00 <e8> 63 2e 40 ff 65 8b 05 8c 59 97 5c 85 c0 74 0a 5b 5d c3 e8 00 6a [ 166.059689] RSP: 0018:ffff9d2400a5fca0 EFLAGS: 00000206 [ 166.059692] RAX: 0000000000000002 RBX: 0000000000000200 RCX: 0000000000000006 [ 166.059694] RDX: 0000000000000000 RSI: ffffffffa404879b RDI: 0000000000000001 [ 166.059696] RBP: ffff9905c0053000 R08: 0000000000000001 R09: 0000000000000001 [ 166.059698] R10: ffff9d2400a5fc50 R11: 0000000000000001 R12: ffffe186c41e2840 [ 166.059700] R13: 0000000000000001 R14: ffff9905c78a1c68 R15: 0000000000000001 [ 166.059704] free_debug_processing+0x257/0x3d0 [ 166.059708] ? free_obj_work+0x1f5/0x250 [ 166.059712] __slab_free+0x374/0x5a0 [ 166.059718] ? kmem_cache_free+0x2e1/0x370 [ 166.059721] ? free_obj_work+0x1f5/0x250 [ 166.059724] kmem_cache_free+0x2e1/0x370 [ 166.059727] free_obj_work+0x1f5/0x250 [ 166.059731] process_one_work+0x28b/0x660 [ 166.059735] ? process_one_work+0x660/0x660 [ 166.059738] worker_thread+0x37/0x390 [ 166.059741] ? process_one_work+0x660/0x660 [ 166.059743] kthread+0x176/0x1a0 [ 166.059746] ? set_kthread_struct+0x40/0x40 [ 166.059749] ret_from_fork+0x22/0x30 [ 166.059754] </TASK> Since these two lockes are both initialized in ath11k_hal_srng_setup, they are assigned with the same key. As a result lockdep suspects that the task is trying to acquire the same lock (due to same key) while already holding it, and thus reports the DEADLOCK warning. However as they are different spinlock instances, the warning is false positive. On the other hand, even no dead lock indeed, this is a major issue for upstream regression testing as it disables lockdep functionality. Fix it by assigning separate lock class key for each srng->lock. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211209011949.151472-1-quic_bqiang@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>

commit fdc1223 upstream. If the string passed into qcom_pil_info_store() isn't as long as PIL_RELOC_NAME_LEN we'll try to copy the string assuming the length is PIL_RELOC_NAME_LEN to the io space and go beyond the bounds of the string. Let's only copy as many byes as the string is long, ignoring the NUL terminator. This fixes the following KASAN error: BUG: KASAN: global-out-of-bounds in __memcpy_toio+0x124/0x140 Read of size 1 at addr ffffffd35086e386 by task rmtfs/2392 CPU: 2 PID: 2392 Comm: rmtfs Tainted: G W 5.16.0-rc1-lockdep+ #10 Hardware name: Google Lazor (rev3+) with KB Backlight (DT) Call trace: dump_backtrace+0x0/0x410 show_stack+0x24/0x30 dump_stack_lvl+0x7c/0xa0 print_address_description+0x78/0x2bc kasan_report+0x160/0x1a0 __asan_report_load1_noabort+0x44/0x50 __memcpy_toio+0x124/0x140 qcom_pil_info_store+0x298/0x358 [qcom_pil_info] q6v5_start+0xdf0/0x12e0 [qcom_q6v5_mss] rproc_start+0x178/0x3a0 rproc_boot+0x5f0/0xb90 state_store+0x78/0x1bc dev_attr_store+0x70/0x90 sysfs_kf_write+0xf4/0x118 kernfs_fop_write_iter+0x208/0x300 vfs_write+0x55c/0x804 ksys_pwrite64+0xc8/0x134 __arm64_compat_sys_aarch32_pwrite64+0xc4/0xdc invoke_syscall+0x78/0x20c el0_svc_common+0x11c/0x1f0 do_el0_svc_compat+0x50/0x60 el0_svc_compat+0x5c/0xec el0t_32_sync_handler+0xc0/0xf0 el0t_32_sync+0x1a4/0x1a8 The buggy address belongs to the variable: .str.59+0x6/0xffffffffffffec80 [qcom_q6v5_mss] Memory state around the buggy address: ffffffd35086e280: 00 00 00 00 02 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffd35086e300: 00 02 f9 f9 f9 f9 f9 f9 00 00 00 06 f9 f9 f9 f9 >ffffffd35086e380: 06 f9 f9 f9 05 f9 f9 f9 00 00 00 00 00 06 f9 f9 ^ ffffffd35086e400: f9 f9 f9 f9 01 f9 f9 f9 04 f9 f9 f9 00 00 01 f9 ffffffd35086e480: f9 f9 f9 f9 00 00 00 00 00 00 00 01 f9 f9 f9 f9 Fixes: 549b67d ("remoteproc: qcom: Introduce helper to store pil info in IMEM") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211117065454.4142936-1-swboyd@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 767c94c ] With CONFIG_LOCKDEP=y and CONFIG_DEBUG_SPINLOCK=y, lockdep reports below warning: [ 166.059415] ============================================ [ 166.059416] WARNING: possible recursive locking detected [ 166.059418] 5.15.0-wt-ath+ #10 Tainted: G W O [ 166.059420] -------------------------------------------- [ 166.059421] kworker/0:2/116 is trying to acquire lock: [ 166.059423] ffff9905f2083160 (&srng->lock){+.-.}-{2:2}, at: ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k] [ 166.059440] but task is already holding lock: [ 166.059442] ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k] [ 166.059491] other info that might help us debug this: [ 166.059492] Possible unsafe locking scenario: [ 166.059493] CPU0 [ 166.059494] ---- [ 166.059495] lock(&srng->lock); [ 166.059498] lock(&srng->lock); [ 166.059500] *** DEADLOCK *** [ 166.059501] May be due to missing lock nesting notation [ 166.059502] 3 locks held by kworker/0:2/116: [ 166.059504] #0: ffff9905c0081548 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f6/0x660 [ 166.059511] #1: ffff9d2400a5fe68 ((debug_obj_work).work){+.+.}-{0:0}, at: process_one_work+0x1f6/0x660 [ 166.059517] #2: ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k] [ 166.059532] stack backtrace: [ 166.059534] CPU: 0 PID: 116 Comm: kworker/0:2 Kdump: loaded Tainted: G W O 5.15.0-wt-ath+ #10 [ 166.059537] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0059.2019.1112.1124 11/12/2019 [ 166.059539] Workqueue: events free_obj_work [ 166.059543] Call Trace: [ 166.059545] <IRQ> [ 166.059547] dump_stack_lvl+0x56/0x7b [ 166.059552] __lock_acquire+0xb9a/0x1a50 [ 166.059556] lock_acquire+0x1e2/0x330 [ 166.059560] ? ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k] [ 166.059571] _raw_spin_lock_bh+0x33/0x70 [ 166.059574] ? ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k] [ 166.059584] ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k] [ 166.059594] ath11k_dp_tx_send_reo_cmd+0x3f/0x130 [ath11k] [ 166.059605] ath11k_dp_rx_tid_del_func+0x221/0x370 [ath11k] [ 166.059618] ath11k_dp_process_reo_status+0x22f/0x2d0 [ath11k] [ 166.059632] ? ath11k_dp_service_srng+0x2ea/0x2f0 [ath11k] [ 166.059643] ath11k_dp_service_srng+0x2ea/0x2f0 [ath11k] [ 166.059655] ath11k_pci_ext_grp_napi_poll+0x1c/0x70 [ath11k_pci] [ 166.059659] __napi_poll+0x28/0x230 [ 166.059664] net_rx_action+0x285/0x310 [ 166.059668] __do_softirq+0xe6/0x4d2 [ 166.059672] irq_exit_rcu+0xd2/0xf0 [ 166.059675] common_interrupt+0xa5/0xc0 [ 166.059678] </IRQ> [ 166.059679] <TASK> [ 166.059680] asm_common_interrupt+0x1e/0x40 [ 166.059683] RIP: 0010:_raw_spin_unlock_irqrestore+0x38/0x70 [ 166.059686] Code: 83 c7 18 e8 2a 95 43 ff 48 89 ef e8 22 d2 43 ff 81 e3 00 02 00 00 75 25 9c 58 f6 c4 02 75 2d 48 85 db 74 01 fb bf 01 00 00 00 <e8> 63 2e 40 ff 65 8b 05 8c 59 97 5c 85 c0 74 0a 5b 5d c3 e8 00 6a [ 166.059689] RSP: 0018:ffff9d2400a5fca0 EFLAGS: 00000206 [ 166.059692] RAX: 0000000000000002 RBX: 0000000000000200 RCX: 0000000000000006 [ 166.059694] RDX: 0000000000000000 RSI: ffffffffa404879b RDI: 0000000000000001 [ 166.059696] RBP: ffff9905c0053000 R08: 0000000000000001 R09: 0000000000000001 [ 166.059698] R10: ffff9d2400a5fc50 R11: 0000000000000001 R12: ffffe186c41e2840 [ 166.059700] R13: 0000000000000001 R14: ffff9905c78a1c68 R15: 0000000000000001 [ 166.059704] free_debug_processing+0x257/0x3d0 [ 166.059708] ? free_obj_work+0x1f5/0x250 [ 166.059712] __slab_free+0x374/0x5a0 [ 166.059718] ? kmem_cache_free+0x2e1/0x370 [ 166.059721] ? free_obj_work+0x1f5/0x250 [ 166.059724] kmem_cache_free+0x2e1/0x370 [ 166.059727] free_obj_work+0x1f5/0x250 [ 166.059731] process_one_work+0x28b/0x660 [ 166.059735] ? process_one_work+0x660/0x660 [ 166.059738] worker_thread+0x37/0x390 [ 166.059741] ? process_one_work+0x660/0x660 [ 166.059743] kthread+0x176/0x1a0 [ 166.059746] ? set_kthread_struct+0x40/0x40 [ 166.059749] ret_from_fork+0x22/0x30 [ 166.059754] </TASK> Since these two lockes are both initialized in ath11k_hal_srng_setup, they are assigned with the same key. As a result lockdep suspects that the task is trying to acquire the same lock (due to same key) while already holding it, and thus reports the DEADLOCK warning. However as they are different spinlock instances, the warning is false positive. On the other hand, even no dead lock indeed, this is a major issue for upstream regression testing as it disables lockdep functionality. Fix it by assigning separate lock class key for each srng->lock. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211209011949.151472-1-quic_bqiang@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4224cfd ] When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. Signed-off-by: suresh kumar <suresh2514@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit fe2640b ] In remove_phb_dynamic() we use &phb->io_resource, after we've called device_unregister(&host_bridge->dev). But the unregister may have freed phb, because pcibios_free_controller_deferred() is the release function for the host_bridge. If there are no outstanding references when we call device_unregister() then phb will be freed out from under us. This has gone mainly unnoticed, but with slub_debug and page_poison enabled it can lead to a crash: PID: 7574 TASK: c0000000d492cb80 CPU: 13 COMMAND: "drmgr" #0 [c0000000e4f075a0] crash_kexec at c00000000027d7dc #1 [c0000000e4f075d0] oops_end at c000000000029608 #2 [c0000000e4f07650] __bad_page_fault at c0000000000904b4 #3 [c0000000e4f076c0] do_bad_slb_fault at c00000000009a5a8 #4 [c0000000e4f076f0] data_access_slb_common_virt at c000000000008b30 Data SLB Access [380] exception frame: R0: c000000000167250 R1: c0000000e4f07a00 R2: c000000002a46100 R3: c000000002b39ce8 R4: 00000000000000c0 R5: 00000000000000a9 R6: 3894674d000000c0 R7: 0000000000000000 R8: 00000000000000ff R9: 0000000000000100 R10: 6b6b6b6b6b6b6b6b R11: 0000000000008000 R12: c00000000023da80 R13: c0000009ffd38b00 R14: 0000000000000000 R15: 000000011c87f0f0 R16: 0000000000000006 R17: 0000000000000003 R18: 0000000000000002 R19: 0000000000000004 R20: 0000000000000005 R21: 000000011c87ede8 R22: 000000011c87c5a8 R23: 000000011c87d3a0 R24: 0000000000000000 R25: 0000000000000001 R26: c0000000e4f07cc8 R27: c00000004d1cc400 R28: c0080000031d00e8 R29: c00000004d23d800 R30: c00000004d1d2400 R31: c00000004d1d2540 NIP: c000000000167258 MSR: 8000000000009033 OR3: c000000000e9f474 CTR: 0000000000000000 LR: c000000000167250 XER: 0000000020040003 CCR: 0000000024088420 MQ: 0000000000000000 DAR: 6b6b6b6b6b6b6ba3 DSISR: c0000000e4f07920 Syscall Result: fffffffffffffff2 [NIP : release_resource+56] [LR : release_resource+48] #5 [c0000000e4f07a00] release_resource at c000000000167258 (unreliable) #6 [c0000000e4f07a30] remove_phb_dynamic at c000000000105648 #7 [c0000000e4f07ab0] dlpar_remove_slot at c0080000031a09e8 [rpadlpar_io] #8 [c0000000e4f07b50] remove_slot_store at c0080000031a0b9c [rpadlpar_io] #9 [c0000000e4f07be0] kobj_attr_store at c000000000817d8c #10 [c0000000e4f07c00] sysfs_kf_write at c00000000063e504 #11 [c0000000e4f07c20] kernfs_fop_write_iter at c00000000063d868 #12 [c0000000e4f07c70] new_sync_write at c00000000054339c #13 [c0000000e4f07d10] vfs_write at c000000000546624 #14 [c0000000e4f07d60] ksys_write at c0000000005469f4 #15 [c0000000e4f07db0] system_call_exception at c000000000030840 #16 [c0000000e4f07e10] system_call_vectored_common at c00000000000c168 To avoid it, we can take a reference to the host_bridge->dev until we're done using phb. Then when we drop the reference the phb will be freed. Fixes: 2dd9c11 ("powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb)") Reported-by: David Dai <zdai@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Sachin Sant <sachinp@linux.ibm.com> Link: https://lore.kernel.org/r/20220318034219.1188008-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4503cc7 ] Do not allow to write timestamps on RX rings if PF is being configured. When PF is being configured RX rings can be freed or rebuilt. If at the same time timestamps are updated, the kernel will crash by dereferencing null RX ring pointer. PID: 1449 TASK: ff187d28ed658040 CPU: 34 COMMAND: "ice-ptp-0000:51" #0 [ff1966a94a713bb0] machine_kexec at ffffffff9d05a0be #1 [ff1966a94a713c08] __crash_kexec at ffffffff9d192e9d #2 [ff1966a94a713cd0] crash_kexec at ffffffff9d1941bd #3 [ff1966a94a713ce8] oops_end at ffffffff9d01bd54 #4 [ff1966a94a713d08] no_context at ffffffff9d06bda4 #5 [ff1966a94a713d60] __bad_area_nosemaphore at ffffffff9d06c10c #6 [ff1966a94a713da8] do_page_fault at ffffffff9d06cae4 #7 [ff1966a94a713de0] page_fault at ffffffff9da0107e [exception RIP: ice_ptp_update_cached_phctime+91] RIP: ffffffffc076db8b RSP: ff1966a94a713e98 RFLAGS: 00010246 RAX: 16e3db9c6b7ccae4 RBX: ff187d269dd3c180 RCX: ff187d269cd4d018 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ff187d269cfcc644 R8: ff187d339b9641b0 R9: 0000000000000000 R10: 0000000000000002 R11: 0000000000000000 R12: ff187d269cfcc648 R13: ffffffff9f128784 R14: ffffffff9d101b70 R15: ff187d269cfcc640 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ff1966a94a713ea0] ice_ptp_periodic_work at ffffffffc076dbef [ice] #9 [ff1966a94a713ee0] kthread_worker_fn at ffffffff9d101c1b #10 [ff1966a94a713f10] kthread at ffffffff9d101b4d #11 [ff1966a94a713f50] ret_from_fork at ffffffff9da0023f Fixes: 77a7811 ("ice: enable receive hardware timestamping") Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Dave Cain <dcain@redhat.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6b9dbed ] pty_write() invokes kmalloc() which may invoke a normal printk() to print failure message. This can cause a deadlock in the scenario reported by syz-bot below: CPU0 CPU1 CPU2 ---- ---- ---- lock(console_owner); lock(&port_lock_key); lock(&port->lock); lock(&port_lock_key); lock(&port->lock); lock(console_owner); As commit dbdda84 ("printk: Add console owner and waiter logic to load balance console writes") said, such deadlock can be prevented by using printk_deferred() in kmalloc() (which is invoked in the section guarded by the port->lock). But there are too many printk() on the kmalloc() path, and kmalloc() can be called from anywhere, so changing printk() to printk_deferred() is too complicated and inelegant. Therefore, this patch chooses to specify __GFP_NOWARN to kmalloc(), so that printk() will not be called, and this deadlock problem can be avoided. Syzbot reported the following lockdep error: ====================================================== WARNING: possible circular locking dependency detected 5.4.143-00237-g08ccc19a-dirty #10 Not tainted ------------------------------------------------------ syz-executor.4/29420 is trying to acquire lock: ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: console_trylock_spinning kernel/printk/printk.c:1752 [inline] ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: vprintk_emit+0x2ca/0x470 kernel/printk/printk.c:2023 but task is already holding lock: ffff8880119c9158 (&port->lock){-.-.}-{2:2}, at: pty_write+0xf4/0x1f0 drivers/tty/pty.c:120 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&port->lock){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 tty_port_tty_get drivers/tty/tty_port.c:288 [inline] <-- lock(&port->lock); tty_port_default_wakeup+0x1d/0xb0 drivers/tty/tty_port.c:47 serial8250_tx_chars+0x530/0xa80 drivers/tty/serial/8250/8250_port.c:1767 serial8250_handle_irq.part.0+0x31f/0x3d0 drivers/tty/serial/8250/8250_port.c:1854 serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1827 [inline] <-- lock(&port_lock_key); serial8250_default_handle_irq+0xb2/0x220 drivers/tty/serial/8250/8250_port.c:1870 serial8250_interrupt+0xfd/0x200 drivers/tty/serial/8250/8250_core.c:126 __handle_irq_event_percpu+0x109/0xa50 kernel/irq/handle.c:156 [...] -> #1 (&port_lock_key){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 serial8250_console_write+0x184/0xa40 drivers/tty/serial/8250/8250_port.c:3198 <-- lock(&port_lock_key); call_console_drivers kernel/printk/printk.c:1819 [inline] console_unlock+0x8cb/0xd00 kernel/printk/printk.c:2504 vprintk_emit+0x1b5/0x470 kernel/printk/printk.c:2024 <-- lock(console_owner); vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394 printk+0xba/0xed kernel/printk/printk.c:2084 register_console+0x8b3/0xc10 kernel/printk/printk.c:2829 univ8250_console_init+0x3a/0x46 drivers/tty/serial/8250/8250_core.c:681 console_init+0x49d/0x6d3 kernel/printk/printk.c:2915 start_kernel+0x5e9/0x879 init/main.c:713 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 -> #0 (console_owner){....}-{0:0}: [...] lock_acquire+0x127/0x340 kernel/locking/lockdep.c:4734 console_trylock_spinning kernel/printk/printk.c:1773 [inline] <-- lock(console_owner); vprintk_emit+0x307/0x470 kernel/printk/printk.c:2023 vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394 printk+0xba/0xed kernel/printk/printk.c:2084 fail_dump lib/fault-inject.c:45 [inline] should_fail+0x67b/0x7c0 lib/fault-inject.c:144 __should_failslab+0x152/0x1c0 mm/failslab.c:33 should_failslab+0x5/0x10 mm/slab_common.c:1224 slab_pre_alloc_hook mm/slab.h:468 [inline] slab_alloc_node mm/slub.c:2723 [inline] slab_alloc mm/slub.c:2807 [inline] __kmalloc+0x72/0x300 mm/slub.c:3871 kmalloc include/linux/slab.h:582 [inline] tty_buffer_alloc+0x23f/0x2a0 drivers/tty/tty_buffer.c:175 __tty_buffer_request_room+0x156/0x2a0 drivers/tty/tty_buffer.c:273 tty_insert_flip_string_fixed_flag+0x93/0x250 drivers/tty/tty_buffer.c:318 tty_insert_flip_string include/linux/tty_flip.h:37 [inline] pty_write+0x126/0x1f0 drivers/tty/pty.c:122 <-- lock(&port->lock); n_tty_write+0xa7a/0xfc0 drivers/tty/n_tty.c:2356 do_tty_write drivers/tty/tty_io.c:961 [inline] tty_write+0x512/0x930 drivers/tty/tty_io.c:1045 __vfs_write+0x76/0x100 fs/read_write.c:494 [...] other info that might help us debug this: Chain exists of: console_owner --> &port_lock_key --> &port->lock Link: https://lkml.kernel.org/r/20220511061951.1114-2-zhengqi.arch@bytedance.com Link: https://lkml.kernel.org/r/20220510113809.80626-2-zhengqi.arch@bytedance.com Fixes: b6da31b ("tty: Fix data race in tty_insert_flip_string_fixed_flag") Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Acked-by: Jiri Slaby <jirislaby@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

A transaction of type BINDER_TYPE_WEAK_HANDLE can fail to increment the reference for a node. In this case, the target proc normally releases the failed reference upon close as expected. However, if the target is dying in parallel the call will race with binder_deferred_release(), so the target could have released all of its references by now leaving the cleanup of the new failed reference unhandled. The transaction then ends and the target proc gets released making the ref->proc now a dangling pointer. Later on, ref->node is closed and we attempt to take spin_lock(&ref->proc->inner_lock), which leads to the use-after-free bug reported below. Let's fix this by cleaning up the failed reference on the spot instead of relying on the target to do so. ================================================================== BUG: KASAN: use-after-free in _raw_spin_lock+0xa8/0x150 Write of size 4 at addr ffff5ca207094238 by task kworker/1:0/590 CPU: 1 PID: 590 Comm: kworker/1:0 Not tainted 5.19.0-rc8 #10 Hardware name: linux,dummy-virt (DT) Workqueue: events binder_deferred_func Call trace: dump_backtrace.part.0+0x1d0/0x1e0 show_stack+0x18/0x70 dump_stack_lvl+0x68/0x84 print_report+0x2e4/0x61c kasan_report+0xa4/0x110 kasan_check_range+0xfc/0x1a4 __kasan_check_write+0x3c/0x50 _raw_spin_lock+0xa8/0x150 binder_deferred_func+0x5e0/0x9b0 process_one_work+0x38c/0x5f0 worker_thread+0x9c/0x694 kthread+0x188/0x190 ret_from_fork+0x10/0x20 Signed-off-by: Carlos Llamas <cmllamas@google.com> Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org> Bug: 239630375 Link: https://lore.kernel.org/all/20220801182511.3371447-1-cmllamas@google.com/ Signed-off-by: Carlos Llamas <cmllamas@google.com> Change-Id: I5085dd0dc805a780a64c057e5819f82dd8f02868 (cherry picked from commit ae3fa5d)

[ Upstream commit 5a42f11 ] Fix the following scenario: 1. ethtool -L $IFACE rx 8 tx 96 2. xdpsock -q 10 -t -z Above refers to a case where user would like to attach XSK socket in txonly mode at a queue id that does not have a corresponding Rx queue. At this moment ice's XSK logic is tightly bound to act on a "queue pair", e.g. both Tx and Rx queues at a given queue id are disabled/enabled and both of them will get XSK pool assigned, which is broken for the presented queue configuration. This results in the splat included at the bottom, which is basically an OOB access to Rx ring array. To fix this, allow using the ids only in scope of "combined" queues reported by ethtool. However, logic should be rewritten to allow such configurations later on, which would end up as a complete rewrite of the control path, so let us go with this temporary fix. [420160.558008] BUG: kernel NULL pointer dereference, address: 0000000000000082 [420160.566359] #PF: supervisor read access in kernel mode [420160.572657] #PF: error_code(0x0000) - not-present page [420160.579002] PGD 0 P4D 0 [420160.582756] Oops: 0000 [#1] PREEMPT SMP NOPTI [420160.588396] CPU: 10 PID: 21232 Comm: xdpsock Tainted: G OE 5.19.0-rc7+ #10 [420160.597893] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [420160.609894] RIP: 0010:ice_xsk_pool_setup+0x44/0x7d0 [ice] [420160.616968] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85 [420160.639421] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282 [420160.646650] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8 [420160.655893] RDX: 0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000 [420160.665166] RBP: 000000000000000a R08: 000000000000000a R09: 0000000000000000 [420160.674493] R10: 000000000000889f R11: 0000000000000000 R12: 000000000000000a [420160.683833] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828 [420160.693211] FS: 00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000 [420160.703645] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [420160.711783] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0 [420160.721399] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [420160.731045] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [420160.740707] PKRU: 55555554 [420160.745960] Call Trace: [420160.750962] <TASK> [420160.755597] ? kmalloc_large_node+0x79/0x90 [420160.762703] ? __kmalloc_node+0x3f5/0x4b0 [420160.769341] xp_assign_dev+0xfd/0x210 [420160.775661] ? shmem_file_read_iter+0x29a/0x420 [420160.782896] xsk_bind+0x152/0x490 [420160.788943] __sys_bind+0xd0/0x100 [420160.795097] ? exit_to_user_mode_prepare+0x20/0x120 [420160.802801] __x64_sys_bind+0x16/0x20 [420160.809298] do_syscall_64+0x38/0x90 [420160.815741] entry_SYSCALL_64_after_hwframe+0x63/0xcd [420160.823731] RIP: 0033:0x7fa86a0dd2fb [420160.830264] Code: c3 66 0f 1f 44 00 00 48 8b 15 69 8b 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bc 0f 1f 44 00 00 f3 0f 1e fa b8 31 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 8b 0c 00 f7 d8 64 89 01 48 [420160.855410] RSP: 002b:00007ffc1146f618 EFLAGS: 00000246 ORIG_RAX: 0000000000000031 [420160.866366] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fa86a0dd2fb [420160.876957] RDX: 0000000000000010 RSI: 00007ffc1146f680 RDI: 0000000000000003 [420160.887604] RBP: 000055d7113a0520 R08: 00007fa868fb8000 R09: 0000000080000000 [420160.898293] R10: 0000000000008001 R11: 0000000000000246 R12: 000055d7113a04e0 [420160.909038] R13: 000055d7113a0320 R14: 000000000000000a R15: 0000000000000000 [420160.919817] </TASK> [420160.925659] Modules linked in: ice(OE) af_packet binfmt_misc nls_iso8859_1 ipmi_ssif intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp mei_me coretemp ioatdma mei ipmi_si wmi ipmi_msghandler acpi_pad acpi_power_meter ip_tables x_tables autofs4 ixgbe i40e crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd ahci mdio dca libahci lpc_ich [last unloaded: ice] [420160.977576] CR2: 0000000000000082 [420160.985037] ---[ end trace 0000000000000000 ]--- [420161.097724] RIP: 0010:ice_xsk_pool_setup+0x44/0x7d0 [ice] [420161.107341] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85 [420161.134741] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282 [420161.144274] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8 [420161.155690] RDX: 0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000 [420161.168088] RBP: 000000000000000a R08: 000000000000000a R09: 0000000000000000 [420161.179295] R10: 000000000000889f R11: 0000000000000000 R12: 000000000000000a [420161.190420] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828 [420161.201505] FS: 00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000 [420161.213628] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [420161.223413] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0 [420161.234653] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [420161.245893] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [420161.257052] PKRU: 55555554 Fixes: 2d4238f ("ice: Add support for AF_XDP") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit a0e44c6 upstream. A transaction of type BINDER_TYPE_WEAK_HANDLE can fail to increment the reference for a node. In this case, the target proc normally releases the failed reference upon close as expected. However, if the target is dying in parallel the call will race with binder_deferred_release(), so the target could have released all of its references by now leaving the cleanup of the new failed reference unhandled. The transaction then ends and the target proc gets released making the ref->proc now a dangling pointer. Later on, ref->node is closed and we attempt to take spin_lock(&ref->proc->inner_lock), which leads to the use-after-free bug reported below. Let's fix this by cleaning up the failed reference on the spot instead of relying on the target to do so. ================================================================== BUG: KASAN: use-after-free in _raw_spin_lock+0xa8/0x150 Write of size 4 at addr ffff5ca207094238 by task kworker/1:0/590 CPU: 1 PID: 590 Comm: kworker/1:0 Not tainted 5.19.0-rc8 #10 Hardware name: linux,dummy-virt (DT) Workqueue: events binder_deferred_func Call trace: dump_backtrace.part.0+0x1d0/0x1e0 show_stack+0x18/0x70 dump_stack_lvl+0x68/0x84 print_report+0x2e4/0x61c kasan_report+0xa4/0x110 kasan_check_range+0xfc/0x1a4 __kasan_check_write+0x3c/0x50 _raw_spin_lock+0xa8/0x150 binder_deferred_func+0x5e0/0x9b0 process_one_work+0x38c/0x5f0 worker_thread+0x9c/0x694 kthread+0x188/0x190 ret_from_fork+0x10/0x20 Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by: Carlos Llamas <cmllamas@google.com> Cc: stable <stable@kernel.org> # 4.14+ Link: https://lore.kernel.org/r/20220801182511.3371447-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 93c660c ] ASAN reports an use-after-free in btf_dump_name_dups: ERROR: AddressSanitizer: heap-use-after-free on address 0xffff927006db at pc 0xaaaab5dfb618 bp 0xffffdd89b890 sp 0xffffdd89b928 READ of size 2 at 0xffff927006db thread T0 #0 0xaaaab5dfb614 in __interceptor_strcmp.part.0 (test_progs+0x21b614) #1 0xaaaab635f144 in str_equal_fn tools/lib/bpf/btf_dump.c:127 #2 0xaaaab635e3e0 in hashmap_find_entry tools/lib/bpf/hashmap.c:143 #3 0xaaaab635e72c in hashmap__find tools/lib/bpf/hashmap.c:212 #4 0xaaaab6362258 in btf_dump_name_dups tools/lib/bpf/btf_dump.c:1525 #5 0xaaaab636240c in btf_dump_resolve_name tools/lib/bpf/btf_dump.c:1552 #6 0xaaaab6362598 in btf_dump_type_name tools/lib/bpf/btf_dump.c:1567 #7 0xaaaab6360b48 in btf_dump_emit_struct_def tools/lib/bpf/btf_dump.c:912 #8 0xaaaab6360630 in btf_dump_emit_type tools/lib/bpf/btf_dump.c:798 #9 0xaaaab635f720 in btf_dump__dump_type tools/lib/bpf/btf_dump.c:282 #10 0xaaaab608523c in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:236 #11 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875 #12 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062 #13 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697 #14 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308 #15 0xaaaab5d65990 (test_progs+0x185990) 0xffff927006db is located 11 bytes inside of 16-byte region [0xffff927006d0,0xffff927006e0) freed by thread T0 here: #0 0xaaaab5e2c7c4 in realloc (test_progs+0x24c7c4) #1 0xaaaab634f4a0 in libbpf_reallocarray tools/lib/bpf/libbpf_internal.h:191 #2 0xaaaab634f840 in libbpf_add_mem tools/lib/bpf/btf.c:163 #3 0xaaaab636643c in strset_add_str_mem tools/lib/bpf/strset.c:106 #4 0xaaaab6366560 in strset__add_str tools/lib/bpf/strset.c:157 #5 0xaaaab6352d70 in btf__add_str tools/lib/bpf/btf.c:1519 #6 0xaaaab6353e10 in btf__add_field tools/lib/bpf/btf.c:2032 #7 0xaaaab6084fcc in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:232 #8 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875 #9 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062 #10 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697 #11 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308 #12 0xaaaab5d65990 (test_progs+0x185990) previously allocated by thread T0 here: #0 0xaaaab5e2c7c4 in realloc (test_progs+0x24c7c4) #1 0xaaaab634f4a0 in libbpf_reallocarray tools/lib/bpf/libbpf_internal.h:191 #2 0xaaaab634f840 in libbpf_add_mem tools/lib/bpf/btf.c:163 #3 0xaaaab636643c in strset_add_str_mem tools/lib/bpf/strset.c:106 #4 0xaaaab6366560 in strset__add_str tools/lib/bpf/strset.c:157 #5 0xaaaab6352d70 in btf__add_str tools/lib/bpf/btf.c:1519 #6 0xaaaab6353ff0 in btf_add_enum_common tools/lib/bpf/btf.c:2070 #7 0xaaaab6354080 in btf__add_enum tools/lib/bpf/btf.c:2102 #8 0xaaaab6082f50 in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:162 #9 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875 #10 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062 #11 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697 #12 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308 #13 0xaaaab5d65990 (test_progs+0x185990) The reason is that the key stored in hash table name_map is a string address, and the string memory is allocated by realloc() function, when the memory is resized by realloc() later, the old memory may be freed, so the address stored in name_map references to a freed memory, causing use-after-free. Fix it by storing duplicated string address in name_map. Fixes: 919d2b1 ("libbpf: Allow modification of BTF and add btf__add_str API") Signed-off-by: Xu Kuohai <xukuohai@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/bpf/20221011120108.782373-2-xukuohai@huaweicloud.com Signed-off-by: Sasha Levin <sashal@kernel.org>

…g the sock [ Upstream commit 3cf7203 ] There is a race condition in vxlan that when deleting a vxlan device during receiving packets, there is a possibility that the sock is released after getting vxlan_sock vs from sk_user_data. Then in later vxlan_ecn_decapsulate(), vxlan_get_sk_family() we will got NULL pointer dereference. e.g. #0 [ffffa25ec6978a38] machine_kexec at ffffffff8c669757 #1 [ffffa25ec6978a90] __crash_kexec at ffffffff8c7c0a4d #2 [ffffa25ec6978b58] crash_kexec at ffffffff8c7c1c48 #3 [ffffa25ec6978b60] oops_end at ffffffff8c627f2b #4 [ffffa25ec6978b80] page_fault_oops at ffffffff8c678fcb #5 [ffffa25ec6978bd8] exc_page_fault at ffffffff8d109542 #6 [ffffa25ec6978c00] asm_exc_page_fault at ffffffff8d200b62 [exception RIP: vxlan_ecn_decapsulate+0x3b] RIP: ffffffffc1014e7b RSP: ffffa25ec6978cb0 RFLAGS: 00010246 RAX: 0000000000000008 RBX: ffff8aa000888000 RCX: 0000000000000000 RDX: 000000000000000e RSI: ffff8a9fc7ab803e RDI: ffff8a9fd1168700 RBP: ffff8a9fc7ab803e R8: 0000000000700000 R9: 00000000000010ae R10: ffff8a9fcb748980 R11: 0000000000000000 R12: ffff8a9fd1168700 R13: ffff8aa000888000 R14: 00000000002a0000 R15: 00000000000010ae ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffa25ec6978ce8] vxlan_rcv at ffffffffc10189cd [vxlan] #8 [ffffa25ec6978d90] udp_queue_rcv_one_skb at ffffffff8cfb6507 #9 [ffffa25ec6978dc0] udp_unicast_rcv_skb at ffffffff8cfb6e45 #10 [ffffa25ec6978dc8] __udp4_lib_rcv at ffffffff8cfb8807 #11 [ffffa25ec6978e20] ip_protocol_deliver_rcu at ffffffff8cf76951 #12 [ffffa25ec6978e48] ip_local_deliver at ffffffff8cf76bde #13 [ffffa25ec6978ea0] __netif_receive_skb_one_core at ffffffff8cecde9b #14 [ffffa25ec6978ec8] process_backlog at ffffffff8cece139 #15 [ffffa25ec6978f00] __napi_poll at ffffffff8ceced1a #16 [ffffa25ec6978f28] net_rx_action at ffffffff8cecf1f3 #17 [ffffa25ec6978fa0] __softirqentry_text_start at ffffffff8d4000ca #18 [ffffa25ec6978ff0] do_softirq at ffffffff8c6fbdc3 Reproducer: https://github.com/Mellanox/ovs-tests/blob/master/test-ovs-vxlan-remove-tunnel-during-traffic.sh Fix this by waiting for all sk_user_data reader to finish before releasing the sock. Reported-by: Jianlin Shi <jishi@redhat.com> Suggested-by: Jakub Sitnicki <jakub@cloudflare.com> Fixes: 6a93cc9 ("udp-tunnel: Add a few more UDP tunnel APIs") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 93c660c ] ASAN reports an use-after-free in btf_dump_name_dups: ERROR: AddressSanitizer: heap-use-after-free on address 0xffff927006db at pc 0xaaaab5dfb618 bp 0xffffdd89b890 sp 0xffffdd89b928 READ of size 2 at 0xffff927006db thread T0 #0 0xaaaab5dfb614 in __interceptor_strcmp.part.0 (test_progs+0x21b614) #1 0xaaaab635f144 in str_equal_fn tools/lib/bpf/btf_dump.c:127 #2 0xaaaab635e3e0 in hashmap_find_entry tools/lib/bpf/hashmap.c:143 #3 0xaaaab635e72c in hashmap__find tools/lib/bpf/hashmap.c:212 #4 0xaaaab6362258 in btf_dump_name_dups tools/lib/bpf/btf_dump.c:1525 #5 0xaaaab636240c in btf_dump_resolve_name tools/lib/bpf/btf_dump.c:1552 #6 0xaaaab6362598 in btf_dump_type_name tools/lib/bpf/btf_dump.c:1567 #7 0xaaaab6360b48 in btf_dump_emit_struct_def tools/lib/bpf/btf_dump.c:912 #8 0xaaaab6360630 in btf_dump_emit_type tools/lib/bpf/btf_dump.c:798 #9 0xaaaab635f720 in btf_dump__dump_type tools/lib/bpf/btf_dump.c:282 #10 0xaaaab608523c in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:236 #11 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875 #12 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062 #13 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697 #14 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308 #15 0xaaaab5d65990 (test_progs+0x185990) 0xffff927006db is located 11 bytes inside of 16-byte region [0xffff927006d0,0xffff927006e0) freed by thread T0 here: #0 0xaaaab5e2c7c4 in realloc (test_progs+0x24c7c4) #1 0xaaaab634f4a0 in libbpf_reallocarray tools/lib/bpf/libbpf_internal.h:191 #2 0xaaaab634f840 in libbpf_add_mem tools/lib/bpf/btf.c:163 #3 0xaaaab636643c in strset_add_str_mem tools/lib/bpf/strset.c:106 #4 0xaaaab6366560 in strset__add_str tools/lib/bpf/strset.c:157 #5 0xaaaab6352d70 in btf__add_str tools/lib/bpf/btf.c:1519 #6 0xaaaab6353e10 in btf__add_field tools/lib/bpf/btf.c:2032 #7 0xaaaab6084fcc in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:232 #8 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875 #9 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062 #10 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697 #11 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308 #12 0xaaaab5d65990 (test_progs+0x185990) previously allocated by thread T0 here: #0 0xaaaab5e2c7c4 in realloc (test_progs+0x24c7c4) #1 0xaaaab634f4a0 in libbpf_reallocarray tools/lib/bpf/libbpf_internal.h:191 #2 0xaaaab634f840 in libbpf_add_mem tools/lib/bpf/btf.c:163 #3 0xaaaab636643c in strset_add_str_mem tools/lib/bpf/strset.c:106 #4 0xaaaab6366560 in strset__add_str tools/lib/bpf/strset.c:157 #5 0xaaaab6352d70 in btf__add_str tools/lib/bpf/btf.c:1519 #6 0xaaaab6353ff0 in btf_add_enum_common tools/lib/bpf/btf.c:2070 #7 0xaaaab6354080 in btf__add_enum tools/lib/bpf/btf.c:2102 #8 0xaaaab6082f50 in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:162 #9 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875 #10 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062 #11 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697 #12 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308 #13 0xaaaab5d65990 (test_progs+0x185990) The reason is that the key stored in hash table name_map is a string address, and the string memory is allocated by realloc() function, when the memory is resized by realloc() later, the old memory may be freed, so the address stored in name_map references to a freed memory, causing use-after-free. Fix it by storing duplicated string address in name_map. Fixes: 919d2b1 ("libbpf: Allow modification of BTF and add btf__add_str API") Signed-off-by: Xu Kuohai <xukuohai@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/bpf/20221011120108.782373-2-xukuohai@huaweicloud.com Signed-off-by: Sasha Levin <sashal@kernel.org>

Adding title in README.md file

f470cd7

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Adding title in README.md file#10

Adding title in README.md file#10
kshithijiyer wants to merge 1 commit intointel:masterfrom
kshithijiyer:patch-1

kshithijiyer commented Dec 20, 2019

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

1 participant

Conversation

kshithijiyer commented Dec 20, 2019

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

1 participant