ccairgap

A sandbox for Claude Code and Codex CLI that just works.

Run Claude Code by default, or opt into Codex CLI with --agent codex. The selected agent gets full permissions inside a Docker sandbox while your host filesystem stays physically out of reach. Launches in seconds, even on huge repos. Work lands as new git branches in your repo on exit.

• Full permissions, contained — host filesystem physically out of reach.
• Your selected agent — Claude config and Codex state are staged from your host with agent-specific policy filtering.
• Credentials safe — Claude refresh tokens never enter the container; Codex auth is sanitized into session-local state.
• Work lands as branches — nothing lost if you walk away.
• Fast on large repos — shared clone, no full copy.
• Opt-in hooks and MCP — disabled by default; enable by glob for the selected agent.
• Per-repo config — drop .ccairgap/ at your repo root for ccairgap launch config and Claude-scoped overlays; Codex uses native Codex project guidance.
• Claude resume support — start a Claude session on host or sandbox, continue on either.
• Clipboard passthrough — copy an image on your host, paste it into Claude inside the sandbox. macOS, Linux (Wayland/X11), and WSL2.
• Works behind corp proxies — NODE_EXTRA_CA_CERTS forwards through, so custom CA bundles just work.

Why ccairgap?

vs. running an unsafe agent on your host. One bad tool call — or one prompt-injected instruction — can touch any file your user account can. ccairgap constrains the writable surface physically: not by rules, but by not mounting those paths.

vs. using agent permission prompts. Prompts are tedious to babysit, blanket rules risk over-permissioning, and precise rules are hard to write. ccairgap skips the permission layer entirely — the sandbox itself is the layer.

vs. vendor-generic containers. Anthropic's reference devcontainer and Docker AI Sandboxes hand you an empty ~/.claude/ — re-auth inside, and your skills, hooks, MCP servers, and plugins don't come along. For Claude, ccairgap mirrors your host config read-only, strips the refresh token before any creds enter the container, and lets claude --resume on the host pick up whatever the sandbox produced. For Codex, ccairgap prepares a sanitized session-local CODEX_HOME instead of bind-mounting your host Codex state directly.

Setup

npm i -g ccairgap

Requirements: Node ≥ 20, Docker, git, and rsync on PATH. macOS, Linux, and Windows/WSL2.

Claude login: Run claude once on the host — ccairgap inherits the credentials automatically.

Codex login: Run codex login once on the host, or provide CODEX_API_KEY for Codex print mode. Codex launches read $CODEX_HOME (default ~/.codex) and copy only sanitized session-local state into the container.

First launch: Pulls a pre-built container image from GitHub Container Registry (ghcr.io/alfredvc/ccairgap) — usually ~10–30s on a decent connection. Falls back to local build (~1–2 min) when offline, when --dockerfile is set, or when the published image isn't available for your CLI version. Subsequent launches are seconds.

Tab completion (optional): ccairgap install-completion (bash/zsh/fish). Full reference: docs/completion.md.

Agent selection: Claude is the default. --agent codex and agent: codex opt into Codex CLI inside the same ccairgap sandbox. Codex launches require a workspace repo and use sanitized session-local Codex state. Full details: docs/codex.md.

Quick start

Run inside any git repo:

ccairgap

Claude opens at your repo root by default. When you're done, exit the agent and any committed changes appear in your repository as a new branch ccairgap/<id>.

With Claude selected, the sandbox has:

• Your CLAUDE.md, both project and global
• Your skills from: project, global, inside plugins
• Your memories (read-only)
• Host clipboard images
• Your hooks (may need a custom Dockerfile if hooks shell out to host binaries)
• Your MCP servers (usually needs a custom Dockerfile to install the server binaries)
• Your managed-policy settings (enterprise / MDM; skipped when absent)

With Codex selected, the sandbox has:

• Sanitized host $CODEX_HOME config and auth
• Project guidance from AGENTS.md, AGENTS.override.md, .codex/, and .agents/ surfaces
• Codex hooks and MCP filtered behind the same explicit enable policy
• Session-local Codex history and rollout state, with validated rollout records copied back on handoff

Common setups

# Read-only sibling (e.g. node_modules)
ccairgap --ro node_modules

# Two repos: primary workspace + readable sibling
ccairgap --repo ~/src/foo --extra-repo ~/src/bar

# Hand it a task and walk away
ccairgap -p "add login flow"

# Use Codex instead of Claude
ccairgap --agent codex --repo .

# Resume a Claude session — UUID or the session name claude prints on exit
ccairgap -r 01234567-89ab-cdef-0123-456789abcdef
ccairgap -r 'Refactor login flow'

# Resume a ccairgap-started session on host
claude --resume 01234567-89ab-cdef-0123-456789abcdef

When things go wrong

If the selected agent leaves uncommitted work behind, the container crashes, or you kill -9 the CLI, ccairgap preserves the session dir on disk so nothing is lost.

# See preserved sessions
ccairgap list

# Re-run handoff: fetch the sandbox branch, copy transcripts, clean up
ccairgap recover <id>

# Throw a preserved session away without recovering
ccairgap discard <id>

Full subcommand reference: docs/subcommands.md.

Agent Skills

Install the ccairgap-configure skill so Claude (on your host) can set up ccairgap for a new project — detect which host binaries the workflow needs, generate a small extension Dockerfile, and write .ccairgap/config.yaml with the right --ro, hook, and MCP entries.

npx skills add alfredvc/ccairgap

Then in Claude: "configure ccairgap for this repo". Source: skills/ccairgap-configure/.

User-wide config

Persistent defaults that apply across all projects. Scaffold with:

ccairgap init --user

Config dir: ~/.config/ccairgap/ (or $XDG_CONFIG_HOME/ccairgap/).

File vocabulary:

Path	Role
config.yaml	Defaults for every launch — all config.yaml keys accepted; relative repo/ro/etc. are a hard error (no workspace anchor).
integrations/*.yaml	Per-tool drop-ins; allowlisted keys only: hooks.enable, mcp.enable, docker-run-arg (safe-flag subset).
CLAUDE.md	Claude overlay: appended to in-container ~/.claude/CLAUDE.md before the project block.
settings.json	Claude overlay: deep-merged into ~/.claude/settings.json.
mcp.json	Claude overlay: mcpServers merged into ~/.claude.json.
skills/	Claude overlay: rsynced into ~/.claude/skills/.
Dockerfile	Opt-in custom image sidecar (dockerfile: Dockerfile in config.yaml).

Layer order: defaults < user-wide integrations < user-wide config < project < CLI

Integration drop-ins let third-party tools self-register hooks, MCP servers, or safe docker args without touching the user's config.yaml.

Hermetic overrides:

• --no-user-config — skip the entire user-wide layer (launch config + session environment).
• --bare — skip user-wide and project launch config (session environment still injected).

Full spec: docs/config.md — User-wide config.

How it works

The selected agent runs inside a Docker container with full permissions, but the container can barely see your machine. Your real repo is mounted read-only; wherever the container wants to write, it writes into a lightweight throwaway clone of your repo that shares objects with the original without touching it. When the agent exits, ccairgap runs git fetch on the host, pulling whatever committed work the container produced back into your real repo as a fresh ccairgap/<id> branch. Nothing else lands anywhere.

flowchart LR
    Repo[("Your real repo")]

    subgraph Sandbox["Sandbox (disposable)"]
        direction TB
        Container{{"Docker container<br/>selected agent"}}
        Clone[("Session clone")]
        Container <--> Clone
    end

    Configs[("Your agent state<br/>Claude config or Codex state")]
    Branch["ccairgap/&lt;id&gt; branch"]
    AgentState[("Host agent state")]

    Repo -. "RO + shared objects" .-> Sandbox
    Configs -. "RO mounts / staged copy" .-> Sandbox
    Sandbox == "git fetch on exit" ==> Branch
    Sandbox -. "agent-specific handoff" .-> AgentState
    Branch --> Repo

Loading

For Claude, your ~/.claude/ — settings, plugins, skills, commands, CLAUDE.md, credentials — is mounted read-only and copied in at startup, so inside the container Claude looks and behaves exactly like yours. Project-scope Claude config comes along too, including uncommitted files like settings.local.json with your MCP approvals and permission allow-lists. Transcripts written during the session land back in ~/.claude/projects/ on exit, so claude --resume on the host keeps working.

For Codex, ccairgap resolves $CODEX_HOME, filters config, sanitizes auth, overlays safe project guidance, and writes a session-local CODEX_HOME for the container. Runtime Codex auth, logs, history, memories, plugin state, and marketplace state stay inside the session; validated rollout records are copied back during handoff or recover.

Hooks and MCP servers are disabled by default, because most of them reach for host binaries the container doesn't ship. Opt them in by glob — and if a binary is missing, extend the provided Dockerfile. Your real settings are never edited; the filter runs on copies.

On exit, if the selected agent committed, you get a branch. If it committed to a side branch or left uncommitted work behind, ccairgap preserves the session dir so you can recover it. If it did nothing, nothing changes.

Clipboard passthrough — paste images from your host into Claude inside the sandbox — is on by default on macOS, Linux, and WSL2.

Full design: docs/SPEC.md.

Reference

Launch

• Launch flags
• Subcommands
• Shell completion
• Host environment variables
• Codex support
• Forwarding flags to the selected agent

Config

• Configuration file
• .ccairgap/ — ccairgap-scope Claude config
• User-wide config

Integrations

• Hooks
• MCP servers
• Clipboard passthrough
• Auto-memory
• Managed policy (MDM)

Advanced

• Auth refresh
• Custom Dockerfile
• Raw docker run args & secrets

Design

• Full design spec

Development

npm install
npm run typecheck
npm test
npm run build   # bundles to dist/cli.js via tsup

Contributing

Bug reports and pull requests welcome. Open an issue first for non-trivial changes.

License

MIT.